Active Topics

 


Page 3 of 8 12 3 45 Last »
Reply
Thread Tools
Alecsandru's Avatar
Alecsandru is offline Alecsandru
2014-03-19 , 22:31
Posts: 439 | Thanked: 282 times | Joined on Oct 2012
#21
and why the drivers (the camera one and others ) were patched to work in android(jolla) if they share the same kernel , i don°t think they share the same drivers , the layer + adaptation between them we need , there are more chances to make that available to n900 than to run maemo on other hardware , by the way why alien dalvik won°t run on kernels prior to 3.x.x (jolla , leaving qualcomm s**t aside) , from what I remember it was demoed on n900 , that phone was with a updated kernel? or our kernel was patched?
__________________
N900 Beast featuring :
8GB OPTFS@ext4(*performance mount options)
overclock: cpu[125 - 1,150(*VDD1)+Dsp overclock
CSSU-T latest version
Last edited by Alecsandru; 2014-03-19 at 22:34.
 
PrisonPlanet's Avatar
PrisonPlanet is offline PrisonPlanet
2014-03-20 , 00:22
Posts: 10 | Thanked: 14 times | Joined on Mar 2014
#22
This is very cool - looking forward to this hack!

I'll be glad to test something if you will need more people.
 
wicket's Avatar
wicket is offline wicket
2014-03-20 , 02:38
Posts: 634 | Thanked: 3,266 times | Joined on May 2010 @ Colombia
#23
Originally Posted by marmistrz View Post
Can't our Linux kernel take care of whole power management and our Dalvik app just let be controlled?
That's a possibility but I wouldn't worry about that right now. Just get something working first.

Originally Posted by lexik View Post
Correct me if I'm wrong, but yes, as we are not emulating anything. Drivers are still needed inside (and outside) the LXC, because chrooted system has no knowledge about it's HW.
Spot on.

Originally Posted by Android_808 View Post
AIUI, LXC containers share the same kernel still - see Oracle documentation on LXC
Correct.

Originally Posted by Android_808 View Post
In that case your now looking at patching host kernel to enable Android, which I dare say is going to break a few things a long the way.
That was always going to be the situation, even with a normal chroot. It's not possible to run multiple kernels without a hypervisor.

Originally Posted by Android_808 View Post
If that's the case I'd start looking at a Sailfish approach by running libhybris, if only for the possibility of detaching MCE and co from N900 specifics to allow porting to other devices.
libhybris shouldn't be needed. The kernel and drivers will be running under Maemo with glibc and will continue to talk to the hardware as normal.

Originally Posted by Android_808 View Post
Problem is how much RAM and performance loss your going to see.
The big advantage of OS-level virtualisation is that there is little or no overhead. It will only use whatever is normally used by Android.

Originally Posted by taixzo View Post
If the container has the same kernel, does that mean it has to load two sets of drivers for everything? Or are the android drivers only loaded inside the LXC container?
Drivers (kernel modules) are an extension to the kernel hence they will be provided (shared) by the host OS. If there are any userspace drivers they would have to be loaded inside the container.

Originally Posted by Alecsandru View Post
and why the drivers (the camera one and others ) were patched to work in android(jolla) if they share the same kernel , i don°t think they share the same drivers
I'm not familiar with Android/Jolla patches and without knowing the details I can only speculate but it's possible that they were userspace drivers.

Originally Posted by Alecsandru View Post
by the way why alien dalvik won°t run on kernels prior to 3.x.x (jolla , leaving qualcomm s**t aside) , from what I remember it was demoed on n900 , that phone was with a updated kernel? or our kernel was patched?
That demo was a long time ago so it would have been based on an older version of Android running a 2.6 kernel, most likely patched.
__________________
DebiaN900 - Native Debian on the N900. Deprecated in favour of Maemo Leste.

Maemo Leste for N950 and N9 (currently broken).
Devuan for N950 and N9.

Mobile devices with mainline Linux support - Help needed with documentation.

"Those who do not understand Unix are condemned to reinvent it, poorly." - Henry Spencer
 

The Following 3 Users Say Thank You to wicket For This Useful Post:
Hurrian is offline Hurrian
2014-03-20 , 05:59
Posts: 1,225 | Thanked: 1,905 times | Joined on Feb 2011 @ Quezon City, Philippines
#24
Originally Posted by reinob View Post
Quote from the linked page: "You’ll need a kernel with the Android patches (binder, ashmem, logger etc.)"

[...]

Neither Fremantle will run on Android kernel nor Android will run on Fremantle kernel.

I think that sorta sums it up good enough.
As on Harmattan, the systems runs okay enough even with Android drivers enabled and loaded - no app uses them, so they're left well alone

And the same situation in reverse - on my Android device, I can stop Zygote, take control of the framebuffer, and start Xorg with the GNU Userland from a terminal.

Originally Posted by marmistrz View Post
Supposed there is static pm missing, what would happen while trying to run an Android app? //edit: Can't our Linux kernel take care of whole power management and our Dalvik app just let be controlled?
Assuming that Android runs inside Maemo via ParallelDroid, and static PM support isn't available, Maemo's (IMO superior) dynamic power control will reign supreme.
__________________
N9 PR 1.3 Open Mode + kernel-plus for Harmattan
@kenweknot, working on Glacier for Nemo.
 
Alecsandru's Avatar
Alecsandru is offline Alecsandru
2014-03-20 , 06:26
Posts: 439 | Thanked: 282 times | Joined on Oct 2012
#25
so , let"s start with kernel , what patches and how to compile them without breaking maemo?
__________________
N900 Beast featuring :
8GB OPTFS@ext4(*performance mount options)
overclock: cpu[125 - 1,150(*VDD1)+Dsp overclock
CSSU-T latest version
 
taixzo is offline taixzo
2014-03-20 , 06:41
Posts: 959 | Thanked: 3,427 times | Joined on Apr 2012
#26
Originally Posted by Alecsandru View Post
so , let"s start with kernel , what patches and how to compile them without breaking maemo?
Can't Maemo run on the Nitdroid kernel? If so, that would be a good place to look.
__________________
Saera: A Siri clone for the N900, N9(50) and Jolla

Follow me on Twitter: twitter.com/taixzo
 
foobar is offline foobar
2014-03-20 , 17:22
Posts: 203 | Thanked: 445 times | Joined on Mar 2010
#27
I'd say help freemangordon, pali, et al. to run maemo on 3.x kernels, then go from there.
Win-win for everyone.
Last edited by foobar; 2014-03-20 at 18:13.
 

The Following 7 Users Say Thank You to foobar For This Useful Post:
lexik is offline lexik
2014-03-20 , 18:43
Posts: 71 | Thanked: 177 times | Joined on Aug 2013
#28
Well, I was trying to compile LXC and when generating configure by running ./autogen.sh I'm getting:

aclocal: configure.ac: 205: macro `AM_COND_IF' not found in library
aclocal: configure.ac: 219: macro `AM_COND_IF' not found in library
aclocal: configure.ac: 234: macro `AM_COND_IF' not found in library
aclocal: configure.ac: 252: macro `AM_COND_IF' not found in library
aclocal: configure.ac: 269: macro `AM_COND_IF' not found in library
aclocal: configure.ac: 304: macro `AM_COND_IF' not found in library
aclocal: configure.ac: 315: macro `AM_COND_IF' not found in library
aclocal: configure.ac: 377: macro `AM_COND_IF' not found in library


That's probably related to old version of autoconf used in scratchox. Will update & report.

<- solved by downloading .tar.gz tarball & running configure directly.

Another error log, when running make:

In file included from lxc_attach.c:37:
utils.h:56: error: static declaration of 'setns' follows non-static declaration
/usr/include/bits/sched.h:91: error: previous declaration of 'setns' was here

Ideas? <- caused by broken version of libc6 from previous projects. Reinstalling whole scratchbox, will let you know soon

#lexik
Last edited by lexik; 2014-03-25 at 12:32.
 
marmistrz is offline marmistrz
2014-03-20 , 19:35
Posts: 3,328 | Thanked: 4,476 times | Joined on May 2011 @ Poland
#29
Originally Posted by Hurrian View Post
Assuming that Android runs inside Maemo via ParallelDroid, and static PM support isn't available, Maemo's (IMO superior) dynamic power control will reign supreme.
So what's this whole kernel discussion for? This would mean we don't need those static PM patches... And lexik, don't get scared by any "It won't work" posts. The same was said about Harmattan, that Harmattan apps won't work on Fremantle (hard/soft float)
__________________
If you want to support my work, you can donate by PayPal or Flattr

Projects no longer actively developed: here
 

The Following 2 Users Say Thank You to marmistrz For This Useful Post:
Alecsandru's Avatar
Alecsandru is offline Alecsandru
2014-03-20 , 19:52
Posts: 439 | Thanked: 282 times | Joined on Oct 2012
#30
Originally Posted by foobar View Post
I'd say help freemangordon, pali, et al. to run maemo on 3.x kernels, then go from there.
Win-win for everyone.
that it°s a longshoot , it should be more easy to apply to our kernel instead of the 3.x.x one due to missing drivers in the last one
__________________
N900 Beast featuring :
8GB OPTFS@ext4(*performance mount options)
overclock: cpu[125 - 1,150(*VDD1)+Dsp overclock
CSSU-T latest version
 
Reply
Page 3 of 8 12 3 45 Last »

Tags
android, chroot, easy debian, nitdroid

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 18:20.

Contact Us - Home - Archive - Top