Reply
Thread Tools
Posts: 1 | Thanked: 0 times | Joined on May 2009
#21
Originally Posted by wxcxyz View Post
I had the same problem too,I try to repaire it but failed.Then,if I type commend dmesg | grep mmc1,there are several messages,but if i type commend dmesg | grep mmc2,there are no messang .Isn't it means a hardware problem?
other way,I find everywhere to find N800's Schematics,but they are sll not clear if i zoom it,anybody has a clear version?
thanks!!!
I have the same problem,too

who can tell us ,how to ? Thank you very much!!!
 
polossatik's Avatar
Posts: 126 | Thanked: 23 times | Joined on Jan 2008
#22
Originally Posted by TheGogmagog View Post
It looks like the original poster has given up, or hopefully figured it out.
given up

Originally Posted by TheGogmagog View Post
fanoush's terminal commands probably are as thourough as you need, but there is a 'last resort' test you could perform. You can format the card with the back cover off (it has to be unmounted). You could try sfdisk /dev/mmcblk0 -uM and then just cancel out if you don't want to format it. That would confirm the card is accessable at some level.
this gives sfdisk: fatal error: cannot find /dev/mmcblk0

but thankx anyway
 
Reply


 
Forum Jump


All times are GMT. The time now is 15:39.