Active Topics
-
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,580)
to Nokia N9 / N950 by aspergerguy - 15 hrs, 36 mins ago -
Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 3 days, 12 hrs ago -
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 4 days ago -
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 4 days, 14 hrs ago - more...
|
2010-09-02
, 06:31
|
|
Posts: 13 |
Thanked: 0 times |
Joined on Jan 2010
|
#22
|
so the command line should be like this:?
sudo /usr/bin/flasher-3.5 -c -h -F /Users/me/Downloads/\"RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin\"attachment -f -R --serial-port=us
sudo /usr/bin/flasher-3.5 -c -h -F /Users/me/Downloads/\"RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin\"attachment -f -R --serial-port=us
 |
|
2010-09-02
, 06:32
|
|
Posts: 166 |
Thanked: 191 times |
Joined on Dec 2007
@ Oulu, Finland
|
#23
|
sudo /usr/bin/flasher-3.5 -c -h RX-51:2101 -F /Users/me/Downloads/\"RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin" --serial-port=usb -f -R
|
|
2010-09-02
, 06:33
|
|
Posts: 166 |
Thanked: 191 times |
Joined on Dec 2007
@ Oulu, Finland
|
#24
|
and it is not mandatory to specify -R
|
|
2010-09-02
, 06:42
|
|
Posts: 166 |
Thanked: 191 times |
Joined on Dec 2007
@ Oulu, Finland
|
#25
|
And make sure that you have the latest flasher in use 
|
|
2010-09-02
, 06:48
|
|
Posts: 13 |
Thanked: 0 times |
Joined on Jan 2010
|
#26
|
I got this=
Using serial port usb
Suitable USB device not found, waiting.
USB device found found at bus 005, device address 003-0421-0106-ff-ff.
Waiting for ASIC id...
Got 69 bytes.
ASIC ID:
05 01 05 01 34 30 07 57 13 02 01 00 12 15 01 a0
ea 35 b5 18 b1 16 8f 59 e5 90 32 9f 41 f0 89 c5
d9 de 51 14 15 01 87 3b 4d cd ca f5 44 4d 24 ec
b2 ac 95 53 88 41 4f ab cd 66 15 09 01 f7 48 8f
28 a0 27 e5 b3
Sending 2nd image (14720 bytes)... done.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Using serial port usb
Suitable USB device not found, waiting.
USB device found found at bus 005, device address 003-0421-0106-ff-ff.
Waiting for ASIC id...
Got 69 bytes.
ASIC ID:
05 01 05 01 34 30 07 57 13 02 01 00 12 15 01 a0
ea 35 b5 18 b1 16 8f 59 e5 90 32 9f 41 f0 89 c5
d9 de 51 14 15 01 87 3b 4d cd ca f5 44 4d 24 ec
b2 ac 95 53 88 41 4f ab cd 66 15 09 01 f7 48 8f
28 a0 27 e5 b3
Sending 2nd image (14720 bytes)... done.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
|
|
2010-09-02
, 07:14
|
|
Posts: 166 |
Thanked: 191 times |
Joined on Dec 2007
@ Oulu, Finland
|
#27
|
hmm, can you try again?
|
|
2010-09-02
, 07:44
|
|
Posts: 13 |
Thanked: 0 times |
Joined on Jan 2010
|
#28
|
I did connect the n900 in flash mode (holding 'u') and try again, but this kind of freeze on this=
Image 'secondary', size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
Using serial port usb
Suitable USB device not found, waiting.
Image 'secondary', size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
Using serial port usb
Suitable USB device not found, waiting.
|
|
2010-09-02
, 07:45
|
|
Posts: 13 |
Thanked: 0 times |
Joined on Jan 2010
|
#29
|
I disconnect and connect again the ubs and this come out=
USB device found found at bus 005, device address 003-0421-0106-ff-ff.
Waiting for ASIC id...
Got 69 bytes.
ASIC ID:
05 01 05 01 34 30 07 57 13 02 01 00 12 15 01 a0
ea 35 b5 18 b1 16 8f 59 e5 90 32 9f 41 f0 89 c5
d9 de 51 14 15 01 87 3b 4d cd ca f5 44 4d 24 ec
b2 ac 95 53 88 41 4f ab cd 66 15 09 01 f7 48 8f
28 a0 27 e5 b3
Sending 2nd image (14720 bytes)... done.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
USB device found found at bus 005, device address 003-0421-0106-ff-ff.
Waiting for ASIC id...
Got 69 bytes.
ASIC ID:
05 01 05 01 34 30 07 57 13 02 01 00 12 15 01 a0
ea 35 b5 18 b1 16 8f 59 e5 90 32 9f 41 f0 89 c5
d9 de 51 14 15 01 87 3b 4d cd ca f5 44 4d 24 ec
b2 ac 95 53 88 41 4f ab cd 66 15 09 01 f7 48 8f
28 a0 27 e5 b3
Sending 2nd image (14720 bytes)... done.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
Sending ping... usb_bulk_read: Operation timed out
timeout!
failed.
|
|
2010-09-02
, 09:51
|
|
Posts: 166 |
Thanked: 191 times |
Joined on Dec 2007
@ Oulu, Finland
|
#30
|
And what does it say if you flash it normally like you did in the first time, not cold flash.
-c -h RX-51:2101 --serial-port=usb before defining -F imagename etc in the flashing command