Malaysian Firmware is IIRC pr legacy 005 so yes you can change the version by flashing any other pr legacy 005 or higher firmware versions...It isn't worth the hassle...You can't downgrade to a 001 legacy...

Hi i Have an N9 64gb that is bricked it only shows the warning triangle when switched on. i have tried following the advice that has been stated on how to reflush but nothing works i have tried various variants of the firmware but all the time the rootfs is never flushed and i get error message. kindly assists me.

1st step when asking for help is always to list full details about your product, exactly what you did to get the error, what error you are getting with evidence, what you did to fix the error again with supporting evidence and finally error when you attempted to fix it with supporting evidence...

Hello
First of all I would like to thank you for your valuable support.
Please help me with my not successful flashing my N9 64Go Black MEA (059J228)
Please find below the returned report of the flasher:
_________________________________________________
C:\Program Files\Nokia\Flasher>flasher -f -F D:\DFL61_HARMATTAN_40.2012.21-3_PR_
LEGACY_006-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_006
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 26 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3197 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2590 kB/s]
[f] rootfs [pending 0 % 0 / 978983 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcfCI5Sy/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcfCI5Sy/mnt: No such file or dir
ectory
[Pipe 4] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
__________________________________________________ __
Thank you so much

CHOKRIMAATOUK,

Unfortunately, I think your flash memory is spoilt and you'll have to ask Nokia Care to replace it...

Very sad to hear this especially there is no Nokia Care in Tunisia, I even wrote one time before to them complaining not to be on board here in Tunisia. Also I had brought my handset not a long time ago from an expatiate friend working in Oman.
If any buddy can help I will be very thankful or I should forget about my N9.

For your information, there was not any clear cause had made my N9 to enter in an infinite reboot loop. I remember that the battery was only completely discharged but nothing done at all except that.
Sincerely

Hi CHOKRIMAATOUK,

You may want to try a full flash of rootfs+emmc although I am doubtful it would help. If it does indeed help it would really be a good thing as I understand your pain.

If you need to send it to Nokia Care what you can is call the Nokia Care Centre directly in Oman and inform them you have this device that a friend helped you purchase as your country didn't have it. Now it has its flash memory screwed and you need them to repair it.

They would give you their address and if you mail it to them they'll usually fix it and mail it back to you...

At least that's better than having to bin the device

Hi All,

I am looking for help here after trying many things myself reading posts here and Meego forum. Let me explain this issue briefly.
I have N9 64GB Black bought from Poland, I used it for 4 months. Initially on original fw then I changed variant code from Central Europe(059J1V8) to India(059J236),Even though N9 was never officially released here navifirm had firmware files. I know some people say changing variant code was not required , I did it via nemesis suite. It worked also. After that I flashed Indian FW and emmc. I was able to use phone without any issues. In fact I flashed it with same Indian fw+emmc 3-4 times due to issues with nitdroid.
Phone was working perfectly well.
Then I decided to sell it and that's where all issues started.
I sold it to one guy, who also has one N9 earlier with him. Now he says that he always had problem of SIM error. He thought his SIM was faulty so he waited to get proper microSIM from operator. After getting proper microSIM, he tried that also which failed again. He checked with friend's microSIM and same error. Their SIM cards worked without any issues in other phones. This all he told me after whole 1 month I sold to him.
I tried to tell him to flash phone again but nothing helped. Now this guy wants his money back saying that phone was faulty when I sold him. Which is definitely not the case. Phone was working with me perfectly.
I have offered him help by trying to fix it myself. I got phone today and found that my problem is related to flashing of cmt thing.
I found few threads on TMO as well as Meego forums but I am still unable to fix it by following instructions.
I am referring to following threads.

http://forum.meego.com/showthread.php?t=4728&page=22
http://talk.maemo.org/showthread.php?t=82314&page=3

Phone is working with wifi, bluetooth, only cellular network seems to be dead.
In flashing progress I get following
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3356 kB/s]
It doesnt finish and fails.

Please suggest me some path forward.
I am thinking of checking whether this is hardware or software isssue. I guess I can test that by nitdroid. Right? If cellular network works in android then hardware reason can be safely eliminated.
Please , Please , Please help me with suggestions.
This issue has become kind of serious for me as that guys is doubting my honesty. I need all help from community.
If you need any information,details please let me know.

suyog post full output of the flash and device firmware version from settings->about product

Thanks for quick reply. Here is output of flashing. I am using Indian fw which was working great for almost 2 months before I sold it.

c:\Program Files\Nokia\Flasher>flasher -f -F main.bin --erase-user-data=secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_005
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 18432 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8

Battery level 78 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_005
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 78 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 0 % 6050 / 6050 kB 2834 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2144 kB/s]
[x] rootfs [finished 100 % 1170162 / 1170162 kB 10130 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 2834 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2144 kB/s]
[x] rootfs [finished 100 % 1170162 / 1170162 kB 10130 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe 7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

also while checking settings-->About product I found that it was slow, and asking to be closed. Check attachment.