Difficulties in the flash 900 - Page 4 - maemo.org

Active Topics

Porting apps to Leste (40)
to Maemo 7 / Leste by Maemish - 2 days, 11 hrs ago
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 6 days, 15 hrs ago
more...

Page 4 of 10

Thread Tools

michaaa62	2012-08-31 , 07:22
Posts: 2,102 \| Thanked: 1,937 times \| Joined on Sep 2008 @ Berlin, Germany	#31

There is still hope to get the partition back to some functionality, because partitions one and three are working fine. But the command was faulty. Please try

Code:

sudo gainroot
mkfs.ext3 -L optfs -c /dev/mmcblk0p2

Quote & Reply |

The Following User Says Thank You to michaaa62 For This Useful Post:
azad1top

	azad1top	2012-08-31 , 08:03
	Posts: 84 \| Thanked: 11 times \| Joined on Aug 2012 @ iran	#32

Originally Posted by michaaa62

There is still hope to get the partition back to some functionality, because partitions one and three are working fine. But the command was faulty. Please try
Code:
sudo gainroot
mkfs.ext3 -L optfs -c /dev/mmcblk0p2

Thank you. This new command

Code:

/home/user # mkfs.ext3 -L optfs -c /dev/mmcblk0p2
mke2fs 1.41.3.maemo0 (12-Oct-2008)
Filesystem label=optfs
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
524288 inodes, 2097152 blocks
104857 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2147483648
64 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks: 
	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

badblocks: Input/output error during ext2fs_sync_device
Checking for bad blocks (read-only test):   0.00% done, 0:00done                                
Writing inode tables: done                            
ext2fs_create_resize_inode: Resize inode is corrupt while reserving blocks for online resize
/home/user #

Quote & Reply |

michaaa62	2012-08-31 , 08:35
Posts: 2,102 \| Thanked: 1,937 times \| Joined on Sep 2008 @ Berlin, Germany	#33

Before applying crude force to the partition, try to install recovery-tools http://repository.maemo.org/extras/p...tle5_armel.deb , you may also need libncurcesw5, and run testdisk to fix the partition.

Download the package to Documents, then install it. This will may be give an error. The next command should fix that.

Code:

sudo gainroot
dpkg -i /home/user/MyDocs/.documents/recovery-tools/recovery-tools_6.11-9-fremantle5_armel.deb
apt-get install -f
testdisk /dev/mmcblk0

In testdisk choose 'Proceed', then 'Advanced', then go the second line and select 'Superblock', does it find any? If you find superblocks go back by hitting 'q' twice. Then choose 'Analyse', 'Quick Search', go to the second line, then hit 'p' to list files, are there any?

Quote & Reply |

The Following User Says Thank You to michaaa62 For This Useful Post:
azad1top

	azad1top	2012-08-31 , 16:55
	Posts: 84 \| Thanked: 11 times \| Joined on Aug 2012 @ iran	#34

Originally Posted by michaaa62

Before applying crude force to the partition, try to install recovery-tools http://repository.maemo.org/extras/p...tle5_armel.deb , you may also need libncurcesw5, and run testdisk to fix the partition.

Download the package to Documents, then install it. This will may be give an error. The next command should fix that.[code]sudo gainroot
dpkg -i /home/user/MyDocs/.documents/recovery-tools/recovery-tools_6.11-9-fremantle5_armel.deb
apt-get install -f
?

Attach to depends not installed

Code:

Provides:
recovery-tools
Depends:libc6 (>= 2.5.0-1), libcomerr2 (>= 1.33-3), libgcc1 (>= 4.2.1), libjpeg62, libncursesw5 (>= 5.7-1), libuuid1, zlib1g (>= 1.2.1), libcomerr2 (>= 1.33-3), libgcc1 (>= 4.2.1), libjpeg62, libncursesw5 (>= 5.7-1), libssl0.9.8 (>= 0.9.8f-5), libuuid1, zlib1g (>= 1.2.1)
Size:
346080 bytes

I need another file
Which does not depend on
So I install
After Eternity

Like this

Code:

http://maemo.org/packages/package_instance/view/fremantle_extras-devel_free_armel/recovery-tools/6.11-6-fremantle5/

Does not depend on

Code:

libncursesw5 (>= 5.7-1)..libncursesw5 (>= 5.7-1)

How to install

Eternity after the new version

Updates Latest version ×××recovery-tools_6.11-9-fremantle5_armel.deb××

oki

Last edited by azad1top; 2012-08-31 at 17:09.

Quote & Reply |

	azad1top	2012-09-01 , 04:21
	Posts: 84 \| Thanked: 11 times \| Joined on Aug 2012 @ iran	#35

michaaa62 """ You do not want to comment?

Quote & Reply |

michaaa62	2012-09-01 , 11:57
Posts: 2,102 \| Thanked: 1,937 times \| Joined on Sep 2008 @ Berlin, Germany	#36

Sorry, please clarify.

I was under the impression you have recovery-tools installed now and you would try to get started with testdisk...

Quote & Reply |

The Following User Says Thank You to michaaa62 For This Useful Post:
azad1top

	azad1top	2012-09-02 , 20:45
	Posts: 84 \| Thanked: 11 times \| Joined on Aug 2012 @ iran	#37

Originally Posted by michaaa62

Before applying crude force to the partition, try to install recovery-tools http://repository.maemo.org/extras/p...tle5_armel.deb , you may also need libncurcesw5, and run testdisk to fix the partition.

Download the package to Documents, then install it. This will may be give an error. The next command should fix that.
Code:
sudo gainroot
dpkg -i /home/user/MyDocs/.documents/recovery-tools/recovery-tools_6.11-9-fremantle5_armel.deb
apt-get install -f
testdisk /dev/mmcblk0
In testdisk choose 'Proceed', then 'Advanced', then go the second line and select 'Superblock', does it find any? If you find superblocks go back by hitting 'q' twice. Then choose 'Analyse', 'Quick Search', go to the second line, then hit 'p' to list files, are there any?

test disk

Code:

Nokia N900 porting by Luigi COTIGNANO - http://n900.altervistDisk /dev/mmcblk0 - 32 GB - CHS 982528 4 16
     Partition               Start        End    Size in sect*

 FAT32 LBA                1   0  1 693760   3 16   44400640 P Linux                693761   0  1 955904   3 16   16777216
P Linux Swap           955905   0  1 980480   3 16    1572864




Use Left/Right Arrow keys to CHANGE partition characteristics*=Primary bootable  P=Primary  L=Logical  E=Extended  D=DeletKeys A: add partition, L: load backup, T: change type, P: lisFAT32, 22 GBto continue

in p

Code:

Directory /

drwxr-xr-x     0     0         0 28-May-2012 03:50 .sounds
-rwxr-xr-x     0     0    311470 30-Mar-2010 15:58 .n900.ico
drwxr-xr-x     0     0         0 30-Mar-2010 15:58 .videos
drwxr-xr-x     0     0         0  1-Jan-2009 10:32 Mac OS
drwxr-xr-x     0     0         0 28-May-2012 02:04 .documents
drwxr-xr-x     0     0         0 27-May-2012 21:41 .maps
-rwxr-xr-x     0     0      4096 30-Mar-2010 15:58 ._)
-rwxr-xr-x     0     0    217047 30-Mar-2010 15:58 
rwxr-xr-x     0     0    813488  1-Jan-2009 22:22 _OR_02~1.D-rwxr-xr-x     0     0         0 27-May-2012 14:52 filemanagedrwxr-xr-x     0     0         0  1-Jan-2009 20:42 UC_Browser 

   h to hide deleted files, q to quit

Were tested. Now What do I do?

Quote & Reply |

	azad1top	2012-09-03 , 04:01
	Posts: 84 \| Thanked: 11 times \| Joined on Aug 2012 @ iran	#38

test mmcblk1

Code:

TestDisk 6.11, Data Recovery Utility, April 2009
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Nokia N900 porting by Luigi COTIGNANO - http://n900.altervistDisk /dev/mmcblk1 - 3965 MB - CHS 121008 4 16

Warning: the current number of heads per cylinder is 4
but the correct value may be 64.
You can use the Geometry menu to change this value.
It's something to try if
- some partitions are not found by TestDisk
- or the partition table can not be written because partitions overlaps.
[ Continue ]

Quote & Reply |

	azad1top	2012-09-03 , 05:33
	Posts: 84 \| Thanked: 11 times \| Joined on Aug 2012 @ iran	#39

in analysig disk sectors the counter starts from 900000 what is the problem

Quote & Reply |

michaaa62	2012-09-03 , 06:09
Posts: 2,102 \| Thanked: 1,937 times \| Joined on Sep 2008 @ Berlin, Germany	#40

Originally Posted by azad1top

test disk

Code:

Nokia N900 porting by Luigi COTIGNANO - http://n900.altervistDisk /dev/mmcblk0 - 32 GB - CHS 982528 4 16
     Partition               Start        End    Size in sect*

 FAT32 LBA                1   0  1 693760   3 16   44400640 P Linux                693761   0  1 955904   3 16   16777216
P Linux Swap           955905   0  1 980480   3 16    1572864




Use Left/Right Arrow keys to CHANGE partition characteristics*=Primary bootable  P=Primary  L=Logical  E=Extended  D=DeletKeys A: add partition, L: load backup, T: change type, P: lisFAT32, 22 GBto continue

in p

Code:

Directory /

drwxr-xr-x     0     0         0 28-May-2012 03:50 .sounds
-rwxr-xr-x     0     0    311470 30-Mar-2010 15:58 .n900.ico
drwxr-xr-x     0     0         0 30-Mar-2010 15:58 .videos
drwxr-xr-x     0     0         0  1-Jan-2009 10:32 Mac OS
drwxr-xr-x     0     0         0 28-May-2012 02:04 .documents
drwxr-xr-x     0     0         0 27-May-2012 21:41 .maps
-rwxr-xr-x     0     0      4096 30-Mar-2010 15:58 ._)
-rwxr-xr-x     0     0    217047 30-Mar-2010 15:58 
rwxr-xr-x     0     0    813488  1-Jan-2009 22:22 _OR_02~1.D-rwxr-xr-x     0     0         0 27-May-2012 14:52 filemanagedrwxr-xr-x     0     0         0  1-Jan-2009 20:42 UC_Browser 

   h to hide deleted files, q to quit

Were tested. Now What do I do?

That is the wrong partition!
I asked you to try the second partition in testdisk. You have to scroll to the second line, when all of your partitions are shown. Then try to get the list for this partition, please.