Active Topics

 


Page 5 of 7 « First 34 5 67
Reply
Thread Tools
Crom is offline Crom
2010-04-17 , 09:36
Posts: 79 | Thanked: 11 times | Joined on Oct 2009 @ Norway
#41
Originally Posted by ammadtira View Post
That was the problem I was facing. Its simple. Get the image from

http://tablets-dev.nokia.com/nokia_N900.php

Enter your IMEI. And it will direct you to a page from where you can download the latest image File P.R 1.1

Now rename it to anyname you want and paste this file in the flasher folder that should be present in the program files. Dnt make the mistake that I was doing. I right clicked the icon in start menu and selected "Open File Location" which was actually leading me to the Start menu shortcut folder. Dnt do like this. Copy and Paste it in the flasher folder present in Program Files. Hope u will get ur problem resolved
That's the place i got my "RX-51_2009SE_3.2010.02-8_PR_COMBINED_MR0_ARM" and "RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM" files from.

As i said in prev post, i tryed flashing with the one file, but it seems like i have to use the "VANILLA" file.
But it says in a note
Vanilla version of the eMMC content for Nokia N900
NOTE: Always flash the FIASCO image first, then the eMMC image immediately after that. Never boot up the device between flashing the FIASCO image and the eMMC image!
FIASCO image, is that the same as the RX-51_2009SE_3.2010.02-8_PR_COMBINED_MR0_ARM.bin file??
And how do i get it to not reboot after flashing the first file?

EDIT:
Got it working.
I had to skip the -R at the end of the comand. This is reboot. Then i installed the VANILLA file.
I'm up and running again.
__________________
Is it not strange that we fear most that which never happens? That we destroy our initiative by the fear of defeat; when in reality, defeat is a moust useful tonic and should be accapted as sutch.
Last edited by Crom; 2010-04-17 at 11:01. Reason: Found out what i had to do.
 
msrit is offline msrit
2010-06-02 , 16:17
Posts: 5 | Thanked: 0 times | Joined on Jun 2010
#42
soft reset was done...butwhile doing the hard reset ie while flashing the fiaco image it says sudo comand not found in the cmd ..i am a xp sp3 user...any help??
 
msrit is offline msrit
2010-06-02 , 16:18
Posts: 5 | Thanked: 0 times | Joined on Jun 2010
#43
Originally Posted by Crom View Post
That's the place i got my "RX-51_2009SE_3.2010.02-8_PR_COMBINED_MR0_ARM" and "RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM" files from.

As i said in prev post, i tryed flashing with the one file, but it seems like i have to use the "VANILLA" file.
But it says in a note

FIASCO image, is that the same as the RX-51_2009SE_3.2010.02-8_PR_COMBINED_MR0_ARM.bin file??
And how do i get it to not reboot after flashing the first file?

EDIT:
Got it working.
I had to skip the -R at the end of the comand. This is reboot. Then i installed the VANILLA file.
I'm up and running again.


how did u flash the fiasco image????are xp sp3 user????
i had problem while doing it .it says sudo command not found...
 
iraklis is offline iraklis
2010-06-10 , 15:03
Posts: 18 | Thanked: 2 times | Joined on Jan 2010
#44
I flashed the new firmware and now i want to flash the emmc. The guide says to flash the fiasco image first. what is the fiasco image? Sorry for my dumb question. I tried searching it but still i haven't found anything
 
MaxJP is offline MaxJP
2010-06-13 , 17:14
Posts: 44 | Thanked: 14 times | Joined on Mar 2010
#45
Fiasco is your firmware image... (i guess) Then flash your MMC image. It won't take long...
 
rdhupar is offline rdhupar
2010-11-03 , 12:34
Posts: 2 | Thanked: 0 times | Joined on Nov 2010
#46
Hi guys,

I tried to flash my n900 using the eMMC image for fiasco as well as eMMA and it comes up with square symbols now. I have followed the instructions on the wiki and cant figure out what is the issue. Anyone have any ideas or faced a similar problem, please help.
 
Zaid is offline Zaid
2010-12-11 , 01:30
Posts: 3 | Thanked: 0 times | Joined on Dec 2010
#47
Hi, Im having problems trying to flash the eMMc Im getting the next error

C:\Archivos de programa\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.201
0.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
SU_PREPARE_DATA_BLOCK_REQ terminated with error code 3.

Is there anything I can do?
 
frostbyte's Avatar
frostbyte is offline frostbyte
2010-12-11 , 01:58
Posts: 293 | Thanked: 372 times | Joined on Jul 2010 @ Westside
#48
Originally Posted by Zaid View Post
Hi, Im having problems trying to flash the eMMc Im getting the next error

C:\Archivos de programa\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.201
0.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14

Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
SU_PREPARE_DATA_BLOCK_REQ terminated with error code 3.

Is there anything I can do?

per the wiki:

Run the following command (TIP: Do not include '-R' if you are flashing EMMC as well, see below):
flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f -R
__________________
[ArchLinux|OpenBox blissness]

"The Cake Is A Lie"
 
artishox is offline artishox
2010-12-14 , 19:30
Posts: 32 | Thanked: 17 times | Joined on Oct 2010
#49
Hi, I am planing on flashing my device as it doesn't charge from wall charger, but charges fine from USB (I think there is some software error that doesn't recognize wall charger). But I'm running win7 64bit - will this flasher-3.5.exe work correctly as it is 32bit app?
 
cfh11's Avatar
cfh11 is offline cfh11
2010-12-14 , 19:55
Posts: 1,062 | Thanked: 961 times | Joined on May 2010 @ Boston, MA
#50
http://wiki.maemo.org/Updating_the_firmware

Read this very carefully and you should have little to no problem flashing
__________________
Want to browse streamlined versions of websites automatically when in 2g? Vote for this brainstorm.

Sick of your cell signal not reconnecting after coming out of a bad signal area? Vote for this bug.
 

The Following User Says Thank You to cfh11 For This Useful Post:
Reply
Page 5 of 7 « First 34 5 67

Tags
bada rox

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 19:31.

Contact Us - Home - Archive - Top