Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 12 hrs ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 6 days ago - more...
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
 |
|
2012-07-19
, 20:43
|
|
Posts: 209 |
Thanked: 156 times |
Joined on Jun 2012
|
#52
|
Originally Posted by peterleinchen
Hi, I have installed saveCPU two hours ago. Testing and devel are active. I got 17-1. And now I got an upgrade information. After upgrading I have version 17-2. I rebooted the phone, started saveCPU again but there is still a "0". When I type "dpkg -l | grep i2c" in the terminal I get:
At first, please switch to English? Obwohl ich dich ja gut verstehe
When did you install? From which repo (must be testing or devel)? Just checked and latest version is not yet available. So I assume you got 17-1 which did not have the dependency, so probably you are missing i2c-tools. Check via
dpkg -l | grep i2c
and if not
sudo apt-get install i2c-tools
with testing (or devel) repo enabled.
Alles klar? Meld dich wieder...
ii i2c-tools
3
.0.2-1maemo3I2c tools for linux
Last edited by Acurus_; 2012-07-19 at 20:45.
 |
|
2012-07-19
, 20:49
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#53
|
Yes, 17-2 was latest update (which will need some correction, but only regarding UI On/Off indicator)
Please try
sudo i2cget -y 2 0x55 0x06 w
in termnal and let me know.
Please try
sudo i2cget -y 2 0x55 0x06 w
in termnal and let me know.
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
|
|
2012-07-19
, 20:56
|
|
Posts: 209 |
Thanked: 156 times |
Joined on Jun 2012
|
#54
|
I typed:
sudo gainroot (enter)
i2cget -y 2 0x55 0x06 w (enter)
Message: "Could not set address to 0x55: Device or resource busy"
sudo gainroot (enter)
i2cget -y 2 0x55 0x06 w (enter)
Message: "Could not set address to 0x55: Device or resource busy"
|
|
2012-07-19
, 21:01
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#55
|
Oops!
Do not know what is going on.
Please do a shutdown, pull out battery for a few seconds, then boot up and try again.
Do not know what is going on.
Please do a shutdown, pull out battery for a few seconds, then boot up and try again.
|
|
2012-07-19
, 21:09
|
|
Posts: 209 |
Thanked: 156 times |
Joined on Jun 2012
|
#56
|
Same result. Could meecolay-core be the reason?
Otherwise I am running a widget, which shows the temperatur on the desktop ...
Otherwise I am running a widget, which shows the temperatur on the desktop ...
|
|
2012-07-19
, 21:23
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#57
|
Possibly yes.
Seems there are some libs replaced. (pls see also this http://talk.maemo.org/showthread.php?t=83939)
But I do not know.
Would love to get some confirmation of other testers.
@acurus_
Which widget, what code?
Using omap temp are useless (constand -40 or 0 or ...), bq27x00 deprecated together with BME, so i2cget is my preference to use.
Seems there are some libs replaced. (pls see also this http://talk.maemo.org/showthread.php?t=83939)
But I do not know.
Would love to get some confirmation of other testers.
@acurus_
Which widget, what code?
Using omap temp are useless (constand -40 or 0 or ...), bq27x00 deprecated together with BME, so i2cget is my preference to use.
|
|
2012-07-19
, 21:37
|
|
Posts: 209 |
Thanked: 156 times |
Joined on Jun 2012
|
#58
|
I have installed saveCPU now on another N900 where I haven't installed meecolay-core. But saveCPU do not run as well. Therefore meecoly-core is not the reason.
I am using Desktop Command Execution Widget with this script:
echo `cat /sys/class/power_supply/bq27200-0/temp` °C | sed 's/\B[0-9]\{1\}/&,/'
EDIT: I killed this widget and rebooted the phone. But there is still the "0" for temperature ...
Last edited by Acurus_; 2012-07-19 at 21:47.
I am using Desktop Command Execution Widget with this script:
echo `cat /sys/class/power_supply/bq27200-0/temp` °C | sed 's/\B[0-9]\{1\}/&,/'
EDIT: I killed this widget and rebooted the phone. But there is still the "0" for temperature ...
Last edited by Acurus_; 2012-07-19 at 21:47.
|
|
2012-07-19
, 21:48
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#59
|
OK, confirm your problem here. Module bq27x00 is the problem.
So seems you are on KP <50?
Will investigate and think it is easy to fix that too.
So for people having bq27x00 enabled using that and for others using i2cget.
Do not know if I make it ready tonight, so could take until tomorrow.
And we have to wait for m75p to release it.
So seems you are on KP <50?
Will investigate and think it is easy to fix that too.
So for people having bq27x00 enabled using that and for others using i2cget.
Do not know if I make it ready tonight, so could take until tomorrow.
And we have to wait for m75p to release it.
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
|
|
2012-07-19
, 21:59
|
|
Posts: 209 |
Thanked: 156 times |
Joined on Jun 2012
|
#60
|
Sounds good! Thanks!!!!!!
I am using Power Kernel 50.
I am using Power Kernel 50.
I am sorry but you will have to put another version again.
You are correct but I am also
standard busysbox will produce output of ps likel
but busybox-power (which I use and advise to use) produces:
~ $ /bin/busybox ps -ef | grep /opt/savecpu/savecpu.sh 1613 root 2840 S {savecpu.sh} /bin/sh /opt/savecpu/savecpu.sh start 5699 user 2848 S grep /opt/savecpu/savecpu.sh... edit
Ok, took a few minutes longer, needed some dinner in bewteen.
Here is patch
~ diff /opt/savecpu/savecpu.py.ori.py /opt/savecpu/savecpu.py --- /opt/savecpu/savecpu.py.ori.py +++ /opt/savecpu/savecpu.py @@ -191,7 +191,7 @@ ###temperatura = os.popen('cat /sys/devices/platform/omap34xx_temp/temp1_input').read() temperatura = os.popen('echo $(sudo i2cget -y 2 0x55 0x06 w) | awk \'{ printf ($1*0.25-273)*100 }\'').read() # kernel v47 - print temperatura + #print temperatura #temperatura=temperatura.strip() #print temperatura #if len(temperatura) == 3 : @@ -200,14 +200,17 @@ temperatura = (int(temperatura) + 50) / 100 temperatura=str(temperatura) - print temperatura + #print temperatura - ###check = os.popen('ps -ef | grep /opt/savecpu/savecpu.sh | awk \'/start/ {print $7}\'').read() - check = os.popen('ps -ef | grep /opt/savecpu/savecpu.sh | awk \'/start/ {print $8}\'').read() + bb = os.popen('readlink /usr/sbin/watchdog').read() + if str(bb.strip())=='/bin/busybox': + check = os.popen('ps -ef | grep /opt/savecpu/savecpu.sh | awk \'/start/ {print $7}\'').read() + else: + check = os.popen('ps -ef | grep /opt/savecpu/savecpu.sh | awk \'/start/ {print $8}\'').read() check=check.strip() #print check+ bb = os.popen('readlink /usr/sbin/watchdog').read() + if str(bb.strip())=='/bin/busybox': + check = os.popen('ps -ef | grep /opt/savecpu/savecpu.sh | awk \'/start/ {print $8}\'').read() + else: + check = os.popen('ps -ef | grep /opt/savecpu/savecpu.sh | awk \'/start/ {print $7}\'').read()Last edited by peterleinchen; 2012-07-19 at 20:44.