Active Topics
auouymous |
2011-05-17
, 11:26
|
|
Posts: 875 |
Thanked: 918 times |
Joined on Sep 2010
|
#621
|
Originally Posted by tso
Does the dmesg command show anything?
 |
|
2011-05-17
, 13:08
|
|
Posts: 4,783 |
Thanked: 1,253 times |
Joined on Aug 2007
@ norway
|
#622
|
nothing that sticks out. only thing that i do not recall seeing before i installed diablo-turbo is this:
also, now the blanking issue have become basically permanent. It shows up each time i reboot, and only goes away once i have restarted MCE (makes it dim but not fully blank) and then fiddled with the display settings.
Code:
menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
__________________
Be warned, posts are often line of thoughts at highway speeds...
Be warned, posts are often line of thoughts at highway speeds...
|
|
2011-05-17
, 15:15
|
|
Posts: 875 |
Thanked: 918 times |
Joined on Sep 2010
|
#623
|
Originally Posted by tso
What happens if you set systemui to start at boot (can be toggled in asui-settings:services) and then reboot?
also, now the blanking issue have become basically permanent. It shows up each time i reboot, and only goes away once i have restarted MCE (makes it dim but not fully blank) and then fiddled with the display settings.
You can also try uninstalling diablo-turbo if the problem persists with systemui.
Code:
apt-get remove kernel-dt-sd
|
|
2011-05-17
, 15:30
|
|
Posts: 4,783 |
Thanked: 1,253 times |
Joined on Aug 2007
@ norway
|
#624
|
systemui behaves normally, blank on lock and all.
__________________
Be warned, posts are often line of thoughts at highway speeds...
Be warned, posts are often line of thoughts at highway speeds...
|
|
2011-05-17
, 15:35
|
|
Posts: 875 |
Thanked: 918 times |
Joined on Sep 2010
|
#625
|
New test binary.
@ tso, this won't solve any of your problems but it will change any expected DIMs to OFFs and prevent blanking pause messages if you turn the screen back on immediately after it turns off.
--
I use touch screen sounds but find them annoying when listening to music or podcasts through headphones so I added a button to quickly change the volume of system alerts, keypad and touchscreen sounds. A dark gray bar means the sound is off, 50% white is level 1 and 100% white is level 2.
- fix: blanking pause detection issue when blank and dim timeouts are identical
- button to change system, keypad and touchscreen volumes
@ tso, this won't solve any of your problems but it will change any expected DIMs to OFFs and prevent blanking pause messages if you turn the screen back on immediately after it turns off.
--
I use touch screen sounds but find them annoying when listening to music or podcasts through headphones so I added a button to quickly change the volume of system alerts, keypad and touchscreen sounds. A dark gray bar means the sound is off, 50% white is level 1 and 100% white is level 2.
Originally Posted by tso
hmm
systemui behaves normally, blank on lock and all.
|
|
2011-05-17
, 15:49
|
|
Posts: 4,783 |
Thanked: 1,253 times |
Joined on Aug 2007
@ norway
|
#626
|
asui also seems to behave correctly when running it after booting with systemui, but booting with asui enabled brings back the issue.
__________________
Be warned, posts are often line of thoughts at highway speeds...
Be warned, posts are often line of thoughts at highway speeds...
|
|
2011-05-17
, 16:06
|
|
Posts: 4,783 |
Thanked: 1,253 times |
Joined on Aug 2007
@ norway
|
#627
|
hrmf, using asui settings to stop systemui and then start asui (from a systemui boot) resulted in the blanking issue showing up. And trying to go back to systemui resulted in systemui not showing on pressing the power button...
__________________
Be warned, posts are often line of thoughts at highway speeds...
Be warned, posts are often line of thoughts at highway speeds...
|
|
2011-05-17
, 17:42
|
|
Posts: 1,101 |
Thanked: 1,184 times |
Joined on Aug 2008
@ Spain
|
#628
|
Originally Posted by tso
Once MCE goes nuts, it has to be restarted to work again.
hrmf, using asui settings to stop systemui and then start asui (from a systemui boot) resulted in the blanking issue showing up. And trying to go back to systemui resulted in systemui not showing on pressing the power button...
Try this kernel, it has preemption disabled: https://garage.maemo.org/frs/downloa...mage-nopreempt
|
|
2011-05-17
, 18:11
|
|
Posts: 4,783 |
Thanked: 1,253 times |
Joined on Aug 2007
@ norway
|
#630
|
btw, the latest asui test did not change much related to the dim rather then blank once i give mce a restart.
__________________
Be warned, posts are often line of thoughts at highway speeds...
Be warned, posts are often line of thoughts at highway speeds...
 |
| Tags |
| bada blows, bada rox |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 13:52.