Reply
Thread Tools
Posts: 673 | Thanked: 230 times | Joined on Oct 2012 @ Mumbai
#621
does the firmware depend on product code??
 
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#622
Originally Posted by thedead1440 View Post
please post your output and did you double-check if the one-liner i posted was right?
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_009-OEM1-958_ARM.bin -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1604
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 14482 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1604
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 66 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3024 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1380 kB/s]
[_] rootfs [writing 92 % 1087488 / 1170206 kB 8725 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3024 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1380 kB/s]
[x] rootfs [finished 100 % 1170206 / 1170206 kB 8639 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe 7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_009-OEM1-958_ARM.bin -f -R

this is after the main flash.
yes your one liner was perfect, though I did not rename file to roots.bin I forgot the -R
I will post that shortly
thanks
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#623
Originally Posted by zaidk9 View Post
does the firmware depend on product code??
The PR_LEGACY is the only factor it depends on...

Ofcourse 16/64GB count too but that's minor compared to the PR_LEGACY...
 

The Following User Says Thank You to thedead1440 For This Useful Post:
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#624
Originally Posted by rswelter View Post
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_009-OEM1-958_ARM.bin -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1604
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 14482 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1604
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 66 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3024 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1380 kB/s]
[_] rootfs [writing 92 % 1087488 / 1170206 kB 8725 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3024 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1380 kB/s]
[x] rootfs [finished 100 % 1170206 / 1170206 kB 8639 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe 7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_009-OEM1-958_ARM.bin -f -R

this is after the main flash.
yes your one liner was perfect, though I did not rename file to roots.bin I forgot the -R
I will post that shortly
thanks
after cmt flash
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flasher-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
flasher: unrecognised option `--flasher-only=cmt'
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flasher-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
flasher: unrecognised option `--flasher-only=cmt'
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>flasher -f DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flash-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

ERROR: Unknown arguments specified!
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flash-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1604
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 16503 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1604
Server implements softupd protocol version 1.8
Success

C:\Program Files\Nokia\Flasher>
thanks dead for the help!!!
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#625
Hi do a --flash-only=cmt from your PR_LEGACY 003 firmware file not the 009 file as the 003 is the china firmware that's causing the issue right?
 

The Following User Says Thank You to thedead1440 For This Useful Post:
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#626
Originally Posted by thedead1440 View Post
Hi do a --flash-only=cmt from your PR_LEGACY 003 firmware file not the 009 file as the 003 is the china firmware that's causing the issue right?
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_003-OEM1-958_ARM.bin --flash-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1604
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 15427 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1604
Server implements softupd protocol version 1.8
Success

C:\Program Files\Nokia\Flasher>
now I got two msgs on boot up
unable to access user data and the sim card error?
2nd attempt
camera dead "cant use camera while connected..."
reflashed w/ 003 just "Sim card error" and "camera..." msgs
dificulty loading maps

Last edited by rswelter; 2013-04-23 at 21:14. Reason: added info
 
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#627
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1604
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 13647 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1604
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003
Image cert-sw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 80 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3156 kB/s]
Success

C:\Program Files\Nokia\Flasher>
good news phone is back, but camera still down.
note that I did another reflash slightly different flasher -F main.bin003 --flash-only=cmt -F ;not -R as I had done before. should I attempt another emmc to get the camera back?
still no maps either.

Last edited by rswelter; 2013-04-24 at 02:53. Reason: added comment
 
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#628
@rswelter can you please tell me which .bin file worked for you flashing cmt only?

Did you use from product code mentioned on SIM tray or other?
I had changed product code via nemesis suite.
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#629
Hi rswelter,

Your sim works but the camera is having an issue?

Try as root in terminal to type the following:
Code:
apt-get install camera-ui libqcamera1 --reinstall
 

The Following User Says Thank You to thedead1440 For This Useful Post:
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#630
Originally Posted by suyog View Post
@rswelter can you please tell me which .bin file worked for you flashing cmt only?

Did you use from product code mentioned on SIM tray or other?
I had changed product code via nemesis suite.
I have possibly good news for us chinese N9 owners. I am still very guarded with my comment, but it looks promising.
In answer to your question, yes I used the main.bin from the sim tray. in my case was a 003 aka chinese version. I would recommend you try what i did. I also tried nemesis, but had no luck. yes i was able to change product code, but thats it. afterwards i still was unable to flash(using phoenix, i never tried winflasher w/new product code).
my code looked something like this flasher>flasher -F nameofyourold.bin --flash-only=cmt -f
note that i did this after doing a full reflash with in my case a 009 main and emmc.bin files. I recvd the sim card error and after doing the cmt flash, it was gone. on my first flash, i also had a "unable to use camera while connected to pc msg" that is gone now!! fixed?
I am also downloading new maps, also a previous problem. I would give it a try, though you may need to change your product code back in nemesis to prevent other errors???
stay tuned I will report back on how my N9 is fairing!
 
Reply

Tags
flashing, nokia n9


 
Forum Jump


All times are GMT. The time now is 23:49.