Active Topics
 |
|
2011-05-01
, 06:52
|
|
Posts: 1,079 |
Thanked: 1,019 times |
Joined on Mar 2010
|
#62
|
Have you tried lifting the stand to see if the magnet is still intact?
__________________
Mick has just punched the cr@p out of the "Unlike" button on the Official Nokia Facebook Page.
Mick has just punched the cr@p out of the "Unlike" button on the Official Nokia Facebook Page.
|
|
2011-05-01
, 06:55
|
|
Posts: 30 |
Thanked: 16 times |
Joined on Nov 2010
@ Nagercoil, India
|
#63
|
Thaks for your reply.
yes the magnet is still there.
yes the magnet is still there.
|
|
2011-05-01
, 07:31
|
|
Posts: 1,079 |
Thanked: 1,019 times |
Joined on Mar 2010
|
#64
|
With your dmseg output it doesn't look like there's a problem with the back cover.
Try removing the card and gently cleaning the contacts in the slot and on the card. A small piece of Blu-Tac should do the trick.
There were a lot of problems with Sandisk cards at one time. If you've got another card laying around try that one, see if it picks it up.
Try removing the card and gently cleaning the contacts in the slot and on the card. A small piece of Blu-Tac should do the trick.
There were a lot of problems with Sandisk cards at one time. If you've got another card laying around try that one, see if it picks it up.
__________________
Mick has just punched the cr@p out of the "Unlike" button on the Official Nokia Facebook Page.
Mick has just punched the cr@p out of the "Unlike" button on the Official Nokia Facebook Page.
|
|
2011-05-01
, 10:03
|
|
Posts: 30 |
Thanked: 16 times |
Joined on Nov 2010
@ Nagercoil, India
|
#65
|
I already did that. but still not detecting.
|
|
2011-05-02
, 06:09
|
|
Posts: 30 |
Thanked: 16 times |
Joined on Nov 2010
@ Nagercoil, India
|
#66
|
Today i tried with a multimeter.
Placed the probes at 4 and 6 pin of the sd card connector and when i place a small magnet over the cover sensor to simulate the cover closed.
The multimeter needle goes up for a while and comes back to zero.
Totally confused...
Placed the probes at 4 and 6 pin of the sd card connector and when i place a small magnet over the cover sensor to simulate the cover closed.
The multimeter needle goes up for a while and comes back to zero.
Totally confused...
|
|
2011-05-07
, 07:09
|
|
Posts: 145 |
Thanked: 54 times |
Joined on Feb 2011
@ Finland
|
#67
|
hello, my SD too is not working. i get the following with the dmesg - command
8.067749] mmc0: error -110 whilst initialising SD card
an ideas, what this means?
8.067749] mmc0: error -110 whilst initialising SD card
an ideas, what this means?
|
|
2011-07-26
, 01:14
|
|
Posts: 1 |
Thanked: 0 times |
Joined on Jul 2011
|
#68
|
I have same problems here. First my Nokia N900 cannot detect SIMCARD, Another thing is it cannot detect microSD. And, I cannot charge my handphone through USB..Please help me here.I am stuck.
|
|
2011-07-26
, 13:00
|
|
Posts: 264 |
Thanked: 90 times |
Joined on Jan 2010
|
#69
|
Clean contacts, what brand of micro sd are they?
|
|
2011-07-26
, 13:59
|
|
Posts: 11 |
Thanked: 0 times |
Joined on Mar 2010
|
#70
|
I have had this problem as well, if you look at the camera stand on the back cover there is a very small magnetic piece, mine fell out and my SD card then didn’t show up, when I put the magnetic piece back in the SD card showed up again.
Hope this works.
Hope this works.
[ 6168.557739] cam_shutter (GPIO 110) is now open
[ 6172.768463] cam_focus (GPIO 68) is now active
[ 6173.065277] cam_focus (GPIO 68) is now inactive
[ 6181.924774] cam_shutter (GPIO 110) is now closed
[ 6184.409271] kb_lock (GPIO 113) is now closed
[ 6184.894317] kb_lock (GPIO 113) is now open
[ 6196.776245] slide (GPIO 71) is now open
[ 6332.463928] slide (GPIO 71) is now closed
[ 6338.346557] cam_focus (GPIO 68) is now active
[ 6339.233398] mmc0: cover is open, card is now inaccessible
[ 6339.362213] cam_focus (GPIO 68) is now inactive
[ 6350.266296] mmc0: cover is closed, card is now accessible
[ 6357.377838] slide (GPIO 71) is now open