Page 7 of 9 « First 56 7 89
Reply
Thread Tools
neel.basu is offline neel.basu
2013-05-25 , 10:06
Posts: 32 | Thanked: 7 times | Joined on Apr 2013
#61
I've tried to flash cmt using 280 version BUt that also failed.
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

PHP Code:
03:33:38 ~/Desktop/N9-059J217$ sudo flasher -F 62A0A79D_DFL61_HARMATTAN_40.2012.21-3.280.04.1_PR_LEGACY_280_ARM_RM-696_PRD_signed.bin -f --flash-only=cmt
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 013.
Device identifier: 351669052218994 (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_006
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 17034 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 014.
Device identifier: 351669052218994 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.280.04.1_PR_280
Image cert-sw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 87 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[_] cmt-algo     [init       100 %     789 /     789 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[f] cmt-algo     [init         0 %     789 /     789 kB      NA     ]
[-] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe   1] Finishing in error state with status 1
========================================

ERROR: Failed to flash images 
 
neel.basu is offline neel.basu
2013-05-27 , 06:29
Posts: 32 | Thanked: 7 times | Joined on Apr 2013
#62
Code:
SU_GET_UPDATE_STATUS_REQ
What does this mean ? I've searched But never found any defines for this.
 
rainisto is offline rainisto
2013-05-27 , 17:17
Posts: 1,067 | Thanked: 2,383 times | Joined on Jan 2012 @ Finland
#63
Afaik flasher is asking status of how the update went, and unknown error happens if modem hardware is broken, if you try to downgrade firmware or to change it to different region.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
 

The Following User Says Thank You to rainisto For This Useful Post:
neel.basu is offline neel.basu
2013-05-27 , 17:20
Posts: 32 | Thanked: 7 times | Joined on Apr 2013
#64
How to make sure, which one of these three possibilities has happened in my case ?
 
rainisto is offline rainisto
2013-05-27 , 17:23
Posts: 1,067 | Thanked: 2,383 times | Joined on Jan 2012 @ Finland
#65
there is no way to know, you can roll the dice and decide yourself. Unknown error is unknown. My bet is that hardware is broken.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
 
neel.basu is offline neel.basu
2013-05-27 , 17:25
Posts: 32 | Thanked: 7 times | Joined on Apr 2013
#66
Thanks fro the rare clear answer. I've heard that its not possible to desolder/repair the cmt only without changing the complete board. Is that True ? or Nokia Care Lied to me ?
 
neel.basu is offline neel.basu
2013-05-31 , 16:43
Posts: 32 | Thanked: 7 times | Joined on Apr 2013
#67
well one question. if hardware is broken should I get imei in /proc/cmdline ?
 
suyog is offline suyog
2013-05-31 , 16:57
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#68
Originally Posted by neel.basu View Post
well one question. if hardware is broken should I get imei in /proc/cmdline ?
or if i can see IMEI when in flight mode? How do we know for sure it is hardware issue?
 
neel.basu is offline neel.basu
2013-05-31 , 17:04
Posts: 32 | Thanked: 7 times | Joined on Apr 2013
#69
I believe when in flight mode it doesn't communicate with modem hardware at all
 
suyog is offline suyog
2013-06-01 , 09:17
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#70
Originally Posted by neel.basu View Post
I believe when in flight mode it doesn't communicate with modem hardware at all
Yes, but how it loses IMEI when not in flight mode?
Something is triggering to check that disable. I hope we could know how and why it is happening.
 
Reply
Page 7 of 9 « First 56 7 89

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 09:35.

Contact Us - Home - Archive - Top