polomarko,

OK...so it looks like the German fw 009 was at least partially installed. Unfortunately, you can't downgrade to the Latvian fw as it is a downgrade and it will fail. What we need to do now is wipe everything and start fresh. Make sure that the German fw 009 is not corrupt or that the download was uncomplete, etc. To make sure, download it again from here:
http://nds2.fds-fire.nokia.com/p/d/f...M1-958_ARM.bin

For the eMMC lets use the same one that I used which is the rest of world. Download from here:
http://nds2.fds-fire.nokia.com/p/d/f...MMC_NOMAPS.bin

Once you have both files downloaded you're going to issue this command:
flasher -f -F main.bin -F emmc.bin --erase-user-data
Obviously replacing main with the name of the fw.bin and emmc with the name of the emmc.bin

Make sure that all syntax is correct...it will take awhile while it is erasing everything. It took mine around 10 mins.

Let me know how it goes...

SB

Ok, I did as you say, downloaded again the files, from the links you send me, and after that i executed the comand as stated. It took around 15 minutes to erase everything and start flashing the files. At the end I still got the same error:

Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

Any idea on how I should proceed now?

polomarco,

can you please paste the entire output of what flasher says?

SB

Hey SB
Find below the entire output:

C:\Program Files\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Success

C:\Program Files\Nokia\Flasher>flasher -f -F D4A3D2AC_DFL61_HARMATTAN_40.2012.21
-3_PR_LEGACY_009-OEM1-958_ARM.bin -F DFL61_HARMATTAN_40.2012.13-7.NOMAPS_EMMC_NO
MAPS.bin --erase-user-data
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 20750 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8

Battery level 23 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image tar skipped
Image config skipped

Battery level 24 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[_] cmt-algo [init 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1766 kB/s]
[_] rootfs [writing 0 % 34816 / 1170206 kB 573 kB/s]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[f] cmt-algo [init 0 % 789 / 789 kB NA ]
[-] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1766 kB/s]
[x] rootfs [finished 100 % 1170206 / 1170206 kB 10423 kB/s]
[x] mmc [finished 100 % 261587 / 261587 kB 13064 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>

polomarco,

Ok, now flash the radio with the fw that came with the phone...I think you said it was fw 001
Use this command:
flasher -f -F old_main.bin --flash-only=cmt

Then tell me what it says...

Also, what firmware versions have you tried flashing the radio with in the past?

SB

SD

Done it and this is what I got:

C:\Program Files\Nokia\Flasher>flasher -f -F DFL61_HARMATTAN_30.2012.07-1_PR_LEG
ACY_001-OEM1-958_ARM.bin --flash-only=cmt
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image cert-sw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 29 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[_] cmt-algo [init 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[f] cmt-algo [init 0 % 789 / 789 kB NA ]
[-] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 1] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>

polomarco,

Have you ever flashed the Chinese fw 003 for the radio only?

If you have, then you have to flash the radio from fw 003.

SB

SD

No I haven't tried it. Should I try it?
I checked it now and there are two versions of Chinese fw 30.2012.7.1 003 (for cyan n9)
Is there any difference on which I choose?

I would not be using the chinese firmware. I only used because I had to. my ph was / is a true chinese version. I only used because the chinese ph has a firmware lock. I would not be using it if I were you as you may complicate matters.

try your cmt flash like this:
>flasher -F youroriginalphmain.bin --flash-only=cmt -f
note the lower case f at the end of the sequence. that made the difference for me. I originally had an error 1 also.
if the -f doesnt improve try a -R at the end instead.
good luck

polomarco,

Try what the poster above says...

The only reason I asked is because you posted this earlier:

"OK, i read all the thread and done everything advised. I downloaded and flashed with German version 009, and than did only cmt from the Chinese version but still this is what i got. I feel like I'm hitting a wall here"

If you did truly flash the radio with fw 003 then you're going to have to reflash the radio ONLY with fw 003.

SB