Originally Posted by Dave999

Epic. Lauta project coming up right already?
3 projects running...never really understood what you meant with Lauta so it will be intressting to see what you come up with, if you come up with it.

Originally Posted by LouisDK

I have a cons with the original Jolla Tablet. I was wondering if any of these are fixed in the design of Youyota. I doubt it, but you never know.

1. The tablet takes a long time to fully charged. Despite being powered down and connected to a wall charger it takes about an hour to charge 10%.

2. If I stress it (eg. play an Android game like Uno & Friends) the tablet becomes quite hot and within 15 min. will get a warning to close all apps.

3. And it's power hungry too. It's not uncommon to close 10% charge while playing for 5 minutes.

Originally Posted by chenliangchen

Won't 100% guarantee but we will look at it. More of a power management issue to me. And I also had the battery issue previously as well. Will try to work with Jolla together to improve it, there is definitely some room of it.

Originally Posted by chenliangchen

Actually 2 running, strictly speaking just one (Moto Keyboard), the Youyota Tablet more Michael's but I also consider that mine.

QWERTY phone project hasn't started yet, but a lot things needs to be prepared in advance, so as soon as I finish the other two I can start working on it immediately. Resources needs to be reserved in advance.

Originally Posted by chenliangchen

Won't 100% guarantee but we will look at it. More of a power management issue to me. And I also had the battery issue previously as well. Will try to work with Jolla together to improve it, there is definitely some room of it.

Originally Posted by slp

Is there a developer thread somewhere with more (low level) info about this? Do we have powertop reports (or suspend stats, or ftrace logs, or...) to look at? Where can I find the kernel sources?

Originally Posted by LouisDK

Well sounds awesome. I'm tempted to buy a Youyota despite already owning a Jolla Tablet

Originally Posted by chenliangchen

@Kabouik:

I'm going back to China later this week to finalise the Moto keyboard Mod business. The moulding of the sliding frame plus the hinge indeed is a tough job but we are close to finish. By the time Moto Keyboard is shipping I will start kicking off Lauta-revival project.

With the all in one sliding keyboard, thickness can be greatly reduced (>7mm reduced from Moto Mods)

Rather than Pyra, I want to make a more general keyboard device for every-day use. A good looking product, and can last at least for a few years.

Planned:

- LTE Cat6 support (number of bands depend on the upfront cost. Likely to be 4 or 5 so there will be 2 versions)

- Full QWERTY support with the hinge that can lift the screen (Not exactly same as N950/Lauta but more like Touch Pro 2, you can change the angle)

- 5.0"+ screen. I know this will be a disappoint for some, but you can't find anything reliable and decent below this size, unless someone gives me 1M USD and I can develop a 4-inch decent solution myself...

- Part of the device will use metal, similar to the N950 - again I want everyone can proudly show the device unlike some chunky monsters... And the overall thickness will be controlled. Likely around 12mm. (To ensure a good sized removable battery)

- User can of course remove and replace the battery, when it dies

- Regarding OS - this requires some work and need to analyse the total cost. But I can promise bootloader won't be locked and won't only be AOSP. (Not even considering pre-load with Google service)

- By JUL/AUG when I close the Moto Keyboard project and Youyota production line starts, I will reveal more design work and pictures...