Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 5 hrs, 54 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 18 hrs ago - more...
polomarko |
2013-05-11
, 17:17
|
|
Posts: 43 |
Thanked: 0 times |
Joined on Apr 2013
|
#781
|
Originally Posted by peterleinchen
Thank you for your help Peterleinchen. I'll follow your instructions and let you know on the progress.
|
|
2013-05-11
, 17:44
|
|
Posts: 217 |
Thanked: 142 times |
Joined on Dec 2011
|
#782
|
I made a fool out of myself today and ruined my N9. I hade very little battery juice left when I decided to install the Billboard app. During the installation the battery got totally empty and the phone died.
It was then impossible to even start the phone. I managed to charge it by using the Flasher and then stopped the process at 10% of charge to continue charging with the wall charger.
I have my phone set up with dualboot: Nitdroid and MeeGo 1.2
After my incident I can only boot into Nitdroid. Battery is at 50% now so it's not caused by low battery anymore. Something probably got messed up when installing the app and crashing in the midst of the process.
Can I do something to be able to boot into MeeGo or am I doomed to flash my phone?
If I decide to reflash and go all MeeGo 1.3, is it possible to flash from 1.2 to 1.3 in my situation with a dual boot setup? Will the dual boot and Nitdroid disappear in the progress or do I have to do something special.
Edit: Moderators; feel free to move this post into another thread if it's misplaced.
Last edited by latency; 2013-05-11 at 18:53.
It was then impossible to even start the phone. I managed to charge it by using the Flasher and then stopped the process at 10% of charge to continue charging with the wall charger.
I have my phone set up with dualboot: Nitdroid and MeeGo 1.2
After my incident I can only boot into Nitdroid. Battery is at 50% now so it's not caused by low battery anymore. Something probably got messed up when installing the app and crashing in the midst of the process.
Can I do something to be able to boot into MeeGo or am I doomed to flash my phone?
If I decide to reflash and go all MeeGo 1.3, is it possible to flash from 1.2 to 1.3 in my situation with a dual boot setup? Will the dual boot and Nitdroid disappear in the progress or do I have to do something special.
Edit: Moderators; feel free to move this post into another thread if it's misplaced.
Last edited by latency; 2013-05-11 at 18:53.
|
|
2013-05-12
, 06:53
|
|
Posts: 131 |
Thanked: 22 times |
Joined on Sep 2012
@ India
|
#783
|
Originally Posted by latency
Please check if R&D mode helps you.
I made a fool out of myself today and ruined my N9. I hade very little battery juice left when I decided to install the Billboard app. During the installation the battery got totally empty and the phone died.
It was then impossible to even start the phone. I managed to charge it by using the Flasher and then stopped the process at 10% of charge to continue charging with the wall charger.
I have my phone set up with dualboot: Nitdroid and MeeGo 1.2
After my incident I can only boot into Nitdroid. Battery is at 50% now so it's not caused by low battery anymore. Something probably got messed up when installing the app and crashing in the midst of the process.
Can I do something to be able to boot into MeeGo or am I doomed to flash my phone?
If I decide to reflash and go all MeeGo 1.3, is it possible to flash from 1.2 to 1.3 in my situation with a dual boot setup? Will the dual boot and Nitdroid disappear in the progress or do I have to do something special.
Edit: Moderators; feel free to move this post into another thread if it's misplaced.
http://wiki.maemo.org/N9QTweak#RD_Mode
| The Following User Says Thank You to suyog For This Useful Post: | ||
 |
|
2013-05-12
, 13:32
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#784
|
Originally Posted by peterleinchen
When trying to flash a cmt from another sw release you need to give the ape-algo from current release, so your command should look like:
flasher -a DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin --flash-only=cmt -f
Otherwise it is pointless, as it would be a normal flashing operation...
Originally Posted by polomarko
Beware that I am not a flashing guru (like rainisto and others).
Thank you for your help Peterleinchen. I'll follow your instructions and let you know on the progress.
And maybe I am/was confused and mixed above with flashing different kernels (as I never needed to flash different cmt).
So maybe wait for a confimation from others.
But for sure I would at first start all over with a total reflash
flasher -F fw009.bin -F emmc.bin -f --erase-user-data=secure
and finally flash above command (without reboot).
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
|
|
2013-05-12
, 14:54
|
|
Posts: 217 |
Thanked: 142 times |
Joined on Dec 2011
|
#785
|
Originally Posted by suyog
Thanks!
Please check if R&D mode helps you.
http://wiki.maemo.org/N9QTweak#RD_Mode
That did the trick. I managed to boot in RD mode and then after doing a reset in the settings I could boot in normal production mode.Anyway, if I decide to flash my phone to only have Harmattan 1.3, how should I proceed? I guess I have an open kernel since I'm dual booting with Nitdroid and Harmattan 1.2.
Will a flash just remove bootloaders and Nitdroid bringing me a single Harmattan 1.3?
|
|
2013-05-14
, 20:44
|
|
Posts: 131 |
Thanked: 22 times |
Joined on Sep 2012
@ India
|
#786
|
Originally Posted by latency
If you do zerorize flash it should work. Also please note that there is nothing called harmattan 1.3.
Thanks!
Anyway, if I decide to flash my phone to only have Harmattan 1.3, how should I proceed? I guess I have an open kernel since I'm dual booting with Nitdroid and Harmattan 1.2.
Will a flash just remove bootloaders and Nitdroid bringing me a single Harmattan 1.3?
MeeGo Harmattan is 1.2 but Nokia has PR 1.3 which is latest.
|
|
2013-05-14
, 21:04
|
|
Posts: 217 |
Thanked: 142 times |
Joined on Dec 2011
|
#787
|
Originally Posted by suyog
Thank you for your clarification. I will try your solution by zerorizing and flashing my device to PR 1.3.
If you do zerorize flash it should work. Also please note that there is nothing called harmattan 1.3.
MeeGo Harmattan is 1.2 but Nokia has PR 1.3 which is latest.
|
|
2013-05-15
, 10:21
|
|
Posts: 40 |
Thanked: 28 times |
Joined on Jun 2009
|
#788
|
polomarko,
I know it's a long shot but have you tried flashing using a linux system?
SB
I know it's a long shot but have you tried flashing using a linux system?
SB
|
|
2013-05-17
, 09:11
|
|
Posts: 12 |
Thanked: 2 times |
Joined on May 2013
|
#789
|
Hello to all members,i am new user of nokia n9 and i have some questions about reflashing . In the flasher folder i put only firmware.bin and emmc.bin,or also all the other files from here http://mrcrab.net/nokia/Nokia_N9.htm...n=40.2012.21.3 ?,i use ''sudo flasher'' command only in linux,for windows i use just ''flasher''? I have to put ''flasher -i'' command before the ''flasher -f -F firmware.bin -F emmc.bin -R'' command? Because the forum of my country said to put only ''flasher -f -F firmware.bin -F emmc.bin -R''.
I just bought my n9 and i can't connect it to my nokia 6600 via bluetooth but both devices can connect to other phones(sony xperia),i tried restore settings and clear device and nothing work thats why i want to reflash it just to be sure
I'm sorry for the long post and noobish questions but i just want to be sure of what i'm doing
. In the flasher folder i put only firmware.bin and emmc.bin,or also all the other files from here http://mrcrab.net/nokia/Nokia_N9.htm...n=40.2012.21.3 ?,i use ''sudo flasher'' command only in linux,for windows i use just ''flasher''? I have to put ''flasher -i'' command before the ''flasher -f -F firmware.bin -F emmc.bin -R'' command? Because the forum of my country said to put only ''flasher -f -F firmware.bin -F emmc.bin -R''.I just bought my n9 and i can't connect it to my nokia 6600 via bluetooth but both devices can connect to other phones(sony xperia),i tried restore settings and clear device and nothing work thats why i want to reflash it just to be sure
I'm sorry for the long post and noobish questions but i just want to be sure of what i'm doing
|
|
2013-05-17
, 11:09
|
|
Posts: 29 |
Thanked: 2 times |
Joined on Feb 2013
|
#790
|
Nokia Care Waterford and Nokia.ie have failed to save my N9 which came from china and are not willing to offer any warranty for it in Europe.
