Originally Posted by explit

Thanks Pali, i compiled the latest
u-boot 2013.04-2 with attached kernel-2.6.28.10-cssu3

All steps were described at the top of this post, the only problem was to find
the package: sdk-fiasco-gen
As soon as i had this package installed - it was not so complicated.
I noticed your advice and disabled cssu-devel in my Repos.

Now i have this items in U-Boot-Menu:

Kernel-2.6.28.10-power53 (default boot entry)
U-Boot with attached Kernel-2.6.28.10-cssu3 (Internal NAND)
Kernel-2.6.28.10-cssu3
U-Boot 2013.04-2

Ok i can't go back to the stock PR1.3 kernel-2.6.28-omap1 but i think, i can leave without it.

Thank you for your help !

Originally Posted by devzspy

Let me start off by saying I just got a Nokia N900 so I am a complete beginner.

Sorry if I am missing something but I attempted to try and get the u-boot-flasher and everything installed via apt-get install and Hildon Application Manager

Via Hildon Application Manager I receive "!!!U-Boot with Kernel 2.6.28-omap1 breaks the 3rd party package policy" and check the details and its complaining about my kernel-modules

via apt-get install u-boot-flasher I get:

The following packages have unmet dependencies:
u-boot-flasher: Depends: kernel-modules (= 2.6.28-20103103+0m5) but 2.6.28-20101501+0m5 is to be installed
E: Broken packages

According to dpkg my kernel-modules version is 2.6.28-20101501+0m5

So how do I get my kernel-modules updated to 2.6.28-20103103+0m5?

Originally Posted by pali

2.6.28-20103103+0m5 is a version in the last firmware version PR 1.3 and PR1.3.1. So you first should update to last Maemo version and then install U-Boot.

Search for firmware files:
PR1.3.1 - RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
PR1.3 - RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin

If you are hard hacker, you can find DEB packages in repository:
http://repository.maemo.org/pool/mae...free/k/kernel/

Originally Posted by Macros

I have a N900 with dead EMMC (card did not respond to voltage select)
and a partially corrupt NAND.
Only later regions are affected and before it became unusable I managed to install U-Boot.

Now that we have Maemo Leste I can actually use the phone again!
I just have to select "External SD card"

Now my question: Is there any way I can change the boot order without EMMC?

It faults at

Code:

Booting attached kernel image ...
Wrong Image Format for bootm command
ERROR: can't get kernel image

and drops me to the shell if I don't make a selection.

Maybe I have to remove something from the internal NAND ubifs so it automatically tries the next entry? According to this it should try entries in this order by default: 1. Attached Kernel Image 2. External SD