Active Topics
Rob1n |
2010-02-14
, 14:44
|
|
Posts: 3,617 |
Thanked: 2,412 times |
Joined on Nov 2009
@ Cambridge, UK
|
#81
|
Originally Posted by hieudd
If you've followed the instructions and the N900 isn't recognised, the only thing I can suggest is to use a bootable Linux CD and flash it from there.
|
|
2010-02-17
, 18:01
|
|
Posts: 2 |
Thanked: 0 times |
Joined on Feb 2010
|
#82
|
Hi !!!
Please... could anyone help me to increase the font size for number displayed in contacts?
I have to carry a magnifying glass in my pocket all the time to read the contacts' numbers. (I came to N900 from N97)
And isn't ther some way of displaying contacts as NAME AND NUMBER ?
I'll be very grateful for your help.
Regards,
Raj
Please... could anyone help me to increase the font size for number displayed in contacts?
I have to carry a magnifying glass in my pocket all the time to read the contacts' numbers. (I came to N900 from N97)
And isn't ther some way of displaying contacts as NAME AND NUMBER ?
I'll be very grateful for your help.
Regards,
Raj
|
|
2010-02-17
, 19:44
|
|
Posts: 14 |
Thanked: 0 times |
Joined on Feb 2010
|
#83
|
I have Linux (Slackware) on my comp. here >http://wiki.maemo.org/Updating_the_t...firmware#Linux< it tells me that i need to install "fiasco image" along with maemo flasher to make it work. Where can I get "fiasco image", I`ve been looking for it all over and its nowhere to be found...
|
|
2010-02-17
, 19:47
|
|
Posts: 3,617 |
Thanked: 2,412 times |
Joined on Nov 2009
@ Cambridge, UK
|
#84
|
Originally Posted by danielo5
The FIASCO image is the firmware image you should have downloaded (see step 2 of http://wiki.maemo.org/Updating_the_t...ng_your_device)
I have Linux (Slackware) on my comp. here >http://wiki.maemo.org/Updating_the_t...firmware#Linux< it tells me that i need to install "fiasco image" along with maemo flasher to make it work. Where can I get "fiasco image", I`ve been looking for it all over and its nowhere to be found...
|
|
2010-02-17
, 20:28
|
|
Posts: 14 |
Thanked: 0 times |
Joined on Feb 2010
|
#85
|
Originally Posted by Rob1n
I know I should but where from, and how do I go about it on Slackware??
The FIASCO image is the firmware image you should have downloaded (see step 2 of http://wiki.maemo.org/Updating_the_t...ng_your_device)
Last edited by danielo5; 2010-02-17 at 21:02.
|
|
2010-02-17
, 21:13
|
|
Posts: 3,617 |
Thanked: 2,412 times |
Joined on Nov 2009
@ Cambridge, UK
|
#86
|
Originally Posted by danielo5
Just click on the N900 link in that section - it should point to http://tablets-dev.nokia.com/nokia_N900.php
I know I should but where from, and how do I go about it on Slackware??
|
|
2010-02-18
, 10:46
|
|
Posts: 96 |
Thanked: 23 times |
Joined on Sep 2009
@ Sweden
|
#87
|
Originally Posted by Tiboric
I am on my way to send away my N900 for exchange, want to remove "my " stuff as much as possible.
Here you go guys:
http://www.megaupload.com/?d=UTZVUB0P
http://uploading.com/files/deb59m4b/install.bat/
quick tuturial:
making sure phone is off,
download flasher
install
download firmware
download install.bat
move firmware and install.bat to C:\Program Files\maemo\flasher-3.5
plug usb into computer only
run install
and hold U on the n900 keyboard and plug in usb to n900
should connect then start to install (takes about 90seconds)
boot up your n900
but use your heads as this is my region(Global) and there are 3 different ones, Global, US, Asia
have D/L the Flasher 3.5 and tried to follow the instructions, http://wiki.maemo.org/Updating_the_tablet_firmware but I am far from a coder so I get a bit scared that I will Brick-it.
have put the two large RX51 folders in the Flasher map/file ( there is map named License where I have not put it)
can somebody copy the EXACT command lines i need to type, as the "Dummy" me do not seem to be able to get it working...so I aborted the flashing last time...
in above description D/L install.bat...have not done that is that the fault the Wiki page do not mention that ?
or do you advice my to keep my hands off ?
Do not feel good sending the device to Nokia with some Confidential biz info on it..
thanks in advance for your help
EDIT: have installed the install file and runned it still no action ?
__________________
Will the N900 be the loooooooong awaited replacement for my old N95 1st Gen ?
Will the N900 be the loooooooong awaited replacement for my old N95 1st Gen ?
Last edited by McChicken; 2010-02-18 at 11:23.
|
|
2010-02-18
, 11:14
|
|
Posts: 3,617 |
Thanked: 2,412 times |
Joined on Nov 2009
@ Cambridge, UK
|
#88
|
Originally Posted by McChicken
I'm not sure I follow all of what you've done. You should have downloaded the flasher tool and the two .bin files. Which OS are you running this on? On Windows, you need to install the flasher tool, then copy/move the two .bin files into the Program Files/maemo/flasher-3.5 directory.
I am on my way to send away my N900 for exchange, want to remove "my " stuff as much as possible.
have D/L the Flasher 3.5 and tried to follow the instructions, http://wiki.maemo.org/Updating_the_tablet_firmware but I am far from a coder so I get a bit scared that I will Brick-it.
have put the two large RX51 folders in the Flasher map/file ( there is map named License where I have not put it)
can somebody copy the EXACT command lines i need to type, as the "Dummy" me do not seem to be able to get it working...so I aborted the flashing last time...
in above description D/L install.bat...have not done that is that the fault the Wiki page do not mention that ?
or do you advice my to keep my hands off ?
Do not feel good sending the device to Nokia with some Confidential biz info on it..
thanks in advance for your help
|
|
2010-02-18
, 13:22
|
|
Posts: 14 |
Thanked: 0 times |
Joined on Feb 2010
|
#89
|
Originally Posted by Rob1n
For the third time I have LINUX SLACKWARE on my computer. Aloso "Rob1n" gave me the link to this "http://tablets-dev.nokia.com/nokia_N900.php" i`ve put in my IMEI and i got a web site with about 10 different files, and I`mnot sure which one is the "FIASCO image", help... I know I`m not too clever, don`t blame me...
.....On Windows, you need to install the flasher tool, then copy/move the two .bin files into the Program Files/maemo/flasher-3.5 directory.
, I moved to my laptop with with windows... and it worked thx for all your help, and assistance....
Last edited by danielo5; 2010-02-18 at 13:49.
|
|
2010-02-18
, 13:36
|
|
Posts: 3,841 |
Thanked: 1,079 times |
Joined on Nov 2006
|
#90
|
@danielo5:
Download the .tar.gz version of the flasher tool. It's for Slackware and other Linux x86-distros that aren't .deb-based. Presumably you know how to install a .tar.gz file on Slackware, but if you don't it's as simple as 'tar maemo_flasher-3.5_2.5.2.2.tar.gz'.
Then follow the instructions on the wiki link. If you follow certain links there you'll find the flasher tool too. At one point you have to provide a code, that's the IMEI code of your device (just the digits).
Download the .tar.gz version of the flasher tool. It's for Slackware and other Linux x86-distros that aren't .deb-based. Presumably you know how to install a .tar.gz file on Slackware, but if you don't it's as simple as 'tar maemo_flasher-3.5_2.5.2.2.tar.gz'.
Then follow the instructions on the wiki link. If you follow certain links there you'll find the flasher tool too. At one point you have to provide a code, that's the IMEI code of your device (just the digits).
__________________
N800/OS2007|N900/Maemo5
-- Metalayer-crawler delenda est.
-- Current state: Fed up with everything MeeGo.
N800/OS2007|N900/Maemo5
-- Metalayer-crawler delenda est.
-- Current state: Fed up with everything MeeGo.