Notices

Originally Posted by No!No!No!Yes!

You are right... I promised about "TVRage" beecon but ... forgot!!! Sorry!
Next pop from my stack.

Stay tuned.

Originally Posted by UNderworld

hi is there any way I can back up my widgets etc without using the phone backup function??
please please full command

Originally Posted by No!No!No!Yes!

Sure,
See HOWTO procedures in the WIKI

Originally Posted by UNderworld

I have tried this before posting but did not work..

Nokia-N900-02-8:~# cp -r /home/user/.queen_beecon_dir /home/user/MyDocs/dir1

no error is produced but there is nothing in dir1

edit: do I have to save one by one using the export procedure?

Originally Posted by jakiman

...
btw, I cannot get output to word wrap within the snippet mode.
Is this possible for big text outputs? (so output doesn't go outside of the box)...

Originally Posted by mjec

Piping your command through fold might do what you need. For example:

command | fold -s -w 60

Note that I haven't tested this. More info on fold is available from http://unixhelp.ed.ac.uk/CGI/man-cgi?fold. Specifically the -w width may be of interest, depending on the width of your widget.

Not quite automatic word wrap, but this should work on a command-by-command basis.

Originally Posted by zimon

About "Internal IP" command. Would it be possible somehow to colorize differently address which has default route (out to Internet)?

Code:

# ifconfig;route
bnep0     Link encap:Ethernet  HWaddr EC:9B:5B:D3:XX:XX  
          inet addr:192.168.3.15  Bcast:192.168.3.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2720 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2128 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:397510 (388.1 KiB)  TX bytes:356735 (348.3 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:60 errors:0 dropped:0 overruns:0 frame:0
          TX packets:60 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3016 (2.9 KiB)  TX bytes:3016 (2.9 KiB)

phonet0   Link encap:UNSPEC  HWaddr 15-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          UP POINTOPOINT RUNNING NOARP  MTU:4000  Metric:1
          RX packets:345 errors:0 dropped:0 overruns:0 frame:0
          TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:8444 (8.2 KiB)  TX bytes:5422 (5.2 KiB)

usb0      Link encap:Ethernet  HWaddr C6:B2:5D:9E:YY:YY  
          inet addr:192.168.2.15  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.3.0     *               255.255.255.0   U     0      0        0 bnep0
192.168.2.0     *               255.255.255.0   U     0      0        0 usb0
default         bt              0.0.0.0         UG    0      0        0 bnep0

In this case 192.168.3.15

Originally Posted by gabby131

hi! how can a NOOB execute this commands and see a text result in queen beecon:

sudo gainroot
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq

thanks

UPDATE: i tried cat "cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq" Ι sudo gainroot, butnothing cane out.

please help

BTW: this app is awesome! typing commands is just a tap away!