unoace,

The log part: That shows unable to send the report; I would suggest purge prey_config totally from your device, delete the log file, delete the device in your Prey Control Panel and then set-up a new device...

Have a look here http://preyproject.com/

Can't delete prey log using file manager

EDIT:

ok its sending me reports but i cant use the alarm or any other functions from pc.

the following lines in your earlier post of the log file, indicated the report was being send. i was about to send a message asking you to confirm not receiving any reports
have you enabled the alarm and alert modules?
from the previous log, only webcam, geo, network & session modules seems to be enabled
geo and webcam is not working for you.

can you run following command as root(devel-su) and tell whether you get correct coordinates
/opt/prey/bin/showcoordinates

also run following command to check front camera image capture
/opt/prey/bin/takePhoto 1 /tmp/trial.jpg

some people have problems with front camera image capture.
i need to get some time to add lock feature and wifi autoconnect, for prey to be really useful.
also i need to sort out the dependencies while installing from the store
once these action items are done and there are no big problems, i plan to post it in the store

i get this from the first command

it means you have not installed 'python-qtmobility'

have you installed all dependencies mentioned in first page

you can as root(devel-su) run following command in a terminal and check again
apt-get install python-qtmobility

ok i installed or reinstalled each depo 1 by 1

checked lat and log and they were correct but still cant use the functions of prey

here is my front camera image capture message:

# /opt/prey/bin/takePhoto 1 /tmp/trial.jpgPermission denied: opening file /home/user/.omap3camStaring camera without viewfinder availablePermission denied: opening file /home/user/.omap3camtaking Photoid:1, error:1, errormsg:Camera not ready

and my prey 2 log:

### PREY 0.5.3 spreads its wings!
### Linux RM696 2.6.32.54-dfl61-20121301 #1 PREEMPT Mon Apr 2 14:14:32 EEST 2012 armv7l GNU/Linux

Mon Dec 17 07:58:39 EST 2012

-- Looking for connection...
-- Got network connection!

>> Registering device under account!

-- Gathering PC info...
-- Sending request to Control Panel...
-- Device succesfully added! Applying configuration...
-- All set. Assigned key is c49ewa.
-- Checking URL...

>> Reading configuration...

-- Frequency in sync (25).

>> Reading module configuration...

-- Got instructions for system module.
++ Queueing action for system module!

>> Verifying status...

-- Got status code 200!
-- Nothing to worry about.


>> Running pending actions...

>> Running system module!

-- Creating pidfile for system's 4473...
-- Scanning current system's hardware...
-- Sending updated data...
-- Updating device info...
-- Device updated.
-- Action system exited with status 0.
-- Removing pidfile...
-- No pending actions left. All done!

-- Cleaning up!

reinstalling the deps fixed your geo problem.
you seem to have the same camera problem as brkn and few others. unfortunately no fix for it yet. it is something to do with not having proper permissions.
but your other modules should be working fine. can you post the log after marking the device as missing in the control panel, and enabling alarm, alert & geo modules?

### PREY 0.5.3 spreads its wings!
### Linux RM696 2.6.32.54-dfl61-20121301 #1 PREEMPT Mon Apr 2 14:14:32 EEST 2012 armv7l GNU/Linux

Mon Dec 17 08:57:23 EST 2012

-- Looking for connection...
-- Got network connection!

>> Registering device under account!

-- Gathering PC info...
-- Sending request to Control Panel...
-- Device succesfully added! Applying configuration...
-- All set. Assigned key is 6w1wi1.
-- Checking URL...

>> Reading configuration...

-- Frequency in sync (25).

>> Reading module configuration...

-- Got instructions for system module.
++ Queueing action for system module!

>> Verifying status...

-- Got status code 200!
-- Nothing to worry about.


>> Running pending actions...

>> Running system module!

-- Creating pidfile for system's 22732...
-- Scanning current system's hardware...
-- Sending updated data...
-- Updating device info...
-- Device updated.
-- Action system exited with status 0.
-- Removing pidfile...
-- No pending actions left. All done!

-- Cleaning up!