Reply
Thread Tools
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#921
Originally Posted by raniruth View Post
I`ve Forgotten the password.

But i used devel-su on the terminal after i install it. after that this box appears
If you have forgotten the password a reflash is necessary if you are in normal mode...

Are you in open mode?
 
Posts: 19 | Thanked: 0 times | Joined on Nov 2012
#922
I am in open mode and my phone is connected to my pc, I turn on and off always and the box only appears.
 
Posts: 19 | Thanked: 0 times | Joined on Nov 2012
#923
I am in open mode connected to my pc. And i only see in the pc is box.
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#924
Originally Posted by raniruth View Post
I am in open mode and my phone is connected to my pc, I turn on and off always and the box only appears.
Good since you are in open mode we do another method using a Linux installation / LiveCD...


This link has the instructions which you should follow till step 7 then once your drives are mounted on your PC you can simply delete any fdb* folders from /usr/share/themes/ and at the same time replace your base and blanco folders too...

My db has both the base and blanco folders zipped up if you don't have a backup of them...

Base.zip

Blanco.zip
 
Posts: 19 | Thanked: 0 times | Joined on Nov 2012
#925
from the 4 links. where i will download here?
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#926
Originally Posted by raniruth View Post
from the 4 links. where i will download here?
What do you mean? the instructions are pretty clear of what you need...
 
Posts: 19 | Thanked: 0 times | Joined on Nov 2012
#927
Do i Download this four links?
 
Posts: 19 | Thanked: 0 times | Joined on Nov 2012
#928
I finish downloading the 4 links. what will i do next?
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#929
Originally Posted by raniruth View Post
I finish downloading the 4 links. what will i do next?
Proceed with the instructions on that page till step 7 like I mentioned earlier...
 
Posts: 19 | Thanked: 0 times | Joined on Nov 2012
#930
Device Installation

Provided here are Linux commands.

1. Unplug the usb cable from your phone.

2. Turn your phone off.

3. Load the N950 MeeGo kernel and N950 MeeGo rescue initrd using flasher:

$ sudo flasher --load -k vmlinuz-2.6.32.20112201-11.2-adaptation-n950-bootloader -n initrd.img-rescue-2.6.32.20112201-11.2-n950 --boot
4. Insert the usb cable.

5. Wait about minute until a new USB mass storage device appears on the host.

You should now have three partitions: /dev/sdX1 with is MyDocs, /dev/sdX2
which is MeeGo 1.2 Harmattan rootfs, and /dev/sdX3 which is the MeeGo 1.2
Harmattan home directory.
6. Find exact partition's names found on your Nokia N9/N950. Mine had /dev/sdb2 as N9's rootfs.

$ fdisk -l

where i will type this? I cant understand.
 
Reply


 
Forum Jump


All times are GMT. The time now is 18:44.