I am using Windows :|

Download and boot from a Ubuntu live-cd distro

Hi guys,

Lately I have been getting errors when flashing my phone. Normally flashing goes right right away but now I think I have repartition problems. Don't know if Nemo install has anything to do with this. The error I get when flashing is the same as in this post: http://talk.maemo.org/showthread.php?t=82655

I have used the same firmware images for over a year now with no problems so I'm not sure what's wrong.

Anyways, here are the partitions on my N9 attached to this post.

PS. Tried reflashing after cleanin device from N9 settings with no help. Not even "updating" fw through Nokia suite helped

Bega,

You should simply insert the following command to flash:

The above would fix the partitioning of the device and flash both the rootfs+emmc...

@thedead1440,

The command you gave me works and the device began to flash normally like it always has. Thanks for the quick reply

You are using Nokia N9, so you must know how to use linux Ok, if dont know, I'm sure that there are friends of yours who can use linux. Maan, just fix this little problem

HELP! My USB connection dont work besides charging after flashing openmode.

My N9 chrashed and needed to flash. After flash to standard mode the USB worked OK.

Then i used zImage from here to flash openmode
http://wiki.maemo.org/Ubiboot#Moving...g_Filebox_Root

C:\Programmer\nokia\Flasher>flasher.exe -a DFL61_HARMATTAN_40.2012.21-3.340.04.1
_PR_LEGACY_340_ARM_RM-696_PRD_signed.bin -k zImage --flash-only=kernel --suppres
s-warranty-warning -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan

Picked ape-algo from a FIASCO file
Device is in Sync and connect mode, sending ADL reboot.
ERROR: ReadFile(65540) GetOverlappedResult() error 2 timeout 4975 ms
Unable to detect flashing interface: standing by for device reboot.
Suitable USB interface (bootloader) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.340.04.1_PR_340
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 14798 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version <none>
Image cert-sw not present
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 92 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] kernel [finished 100 % 2834 / 2834 kB 1971 kB/s]
Updating SW release
Success

C:\Programmer\nokia\Flasher>

Then installing Backupmenu_1.1.9_tar and restored from backup as before but USB only charging
Edit: Also BEFORE installing Backupmenu!

In terminal:
accli -I
Current mode: open
uname -r
2.6.32.54-dfl61-20121301

Yesterday suddenly my browser crashed and several apps wouldn't start, so I rebooted the phone and got the "Device not working properly" message.

Trying to flash the phone I receive a "Downgrade disallowed" message although the version/variant number is higher or am I blind and/or stupid?

sudo flasher -f -F 34417842_DFL61_HARMATTAN_40.2012.21-3.430.01.1_PR_LEGACY_430_ARM_RM-696_PRD_signed.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 008, device address 014.
Device identifier: 357923041477417 (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.350.3_PR_350
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 33664 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 008, device address 015.
Device identifier: 357923041477417 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.430.01.1_PR_430
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 43 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1354010096)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images



Why is that and what can I do now?

MONVMENTVM,

Get the same image; it could be because you are on a telco-variant you can't upgrade...


Garp,

Maybe your backupmenu restore screwed up? First thing I would do is reflash and see if your N9 works without backupmenu...

Thanks but dont think thats problem because I couldn't get backupmenu_1.1.9_tar because it was only on PC. Have to flash again to standard mode to get it to N9!