Sailfish OS for the Samsung Galaxy S4 (GT-I9505) - (jfltexx)

Requirements:
Before you start to download anything, please read all this through carefully.
The first requirement is your device must be rooted and you should be able to install a custom recovery (preferably TWRP) onto it.

Installation instructions:
1. Download all files, LOS17.1 zip, Sailfish OS zip and twrp2.8.7.img to the external SD card on the phone
2. Reboot into TWRP (Hold buttons: Power on + Home + Volume up)

At this point you should install TWRP 2.8.7 as the installation work the best with this recovery.
Once you flashed TWRP 2.8.7, please reboot into recovery and continue the process.

3. Do a factory reset
4. Format data to remove any encryption or other residues
5. Still in recovery, flash the LOS17.1 image
6. Still in recovery, flash Sailfish Os image
7. Reboot
8. Enjoy the latest (4.4.0.72) Sailfish OS on your S4 (jfltexx).
You will need patience as the first boot will take for a while. Then you can go through the initial Sailfish OS set up.

This Sailfish OS Android HAL is based on LOS 17.1.

Downloads:

• twrp2.8.7.img for S4 (jfltexx)
• LOS17.1 for S4 (jfltexx)
• Sailfish OS 4.4.0.72 for S4 (jfltexx) - 17/12/2022

Debug/login/troubleshooting:
In Ubuntu, connect USB cable. telnet 192.168.2.15 2323 or SSH defaultuser@192.168.2.15.

Notes:

• On Sailfish OS, as it is a Linux system, you cannot install/run any android apps. (Although WayDroid is WIP)

How to make a backup/restore with TWRP:
You can boot into TWRP with the usual button combination (Hold buttons: Power on + Home + Volume up) and can make backup/restore.

14/07/2022
=========
Work:

• Screen
• Touch
• IMEI number detection
• Calls incoming/outgoing
• Messages incoming/outgoing
• Mobile data
• Wifi
• Sensors (GPS, Acceleration, Gyro, Magnetometer, Proximity) - GPS tested working with PureMaps (for car navigation) and Stellarium (for positioning)
• Pixel ratio and icons set to 1.75
• Sound adjusting with volume rockers
• Apps do start (Firejail/Sailjail)
• Jolla Store
• Charging icon displayed properly
• Home button
• Back button
• Recent apps button (pulls down/rolls up the Top menu)
• External SD card mounted on /run/media/defaultuser/C1FF-1113 (C1FF-1113 is an example only, it can be different on your device do a df -h to double check what's available in /run/media/defaultuser/)
• Network storage can be mounted (install cifs package)
• MTP
• USB modes
• SSH
• LEDs (except white)
• LXC container (desktop Linux Debian installed in it - demo screen-shot)
• Vibra
• Audio routing to headphones if connected
• OTA update

Do not work: (all of these WIP)

• Bluetooth
• Camera (and all related stuff e.g. torch)
• Video playing/recording
• Waydroid

Known bugs:

• SIM not detected
  Solution: restart ofono manually (in command line like Fingerterm): devel-su systemctl restart ofono
• Device keeps booting even if it is shut down from the os
  Solution: Take out the battery (you can put it back straight away, it will stay switched off)
• When the device is switched off and connected to a charger, it boots up but the OS is unstable
  Solution: Charge it when it is booted into the OS
• When the battery is flat and the device is connected to a charger, it goes into a boots loop
  Solution: Boot into recovery, charge the device until the battery has a few percentages, then boot into the OS and charge it fully

Most of the charging issues can be avoided if you don't let the battery run out.


Extra: Desktop Linux distro install/run on the Galaxy S4!
(You might need to install sudo: devel-su zypper in sudo)

• go to command line (e.g. Fingerterm)
• get a root shell:
  devel-su
• download and install lxc-templates-desktop-1.1-4.noarch.rpm:
  zypper in lxc-templates-desktop-1.1-4.noarch.rpm
• add repo for qxcompositor:
  ssu ar elros34 https://repo.sailfishos.org/obs/home...ishos_armv7hl/
• update repos:
  zypper ref
• install qxcompositor:
  zypper in qxcompositor
• download and install qxdisplay:
  zypper in qxdisplay-0.1-2.armv7hl.rpm
• download and install harbour-containers-0.4-1.armv7hl.rpm:
  zypper in harbour-containers-0.4-1.armv7hl.rpm
• create a container named Debian and install Debian Sid Desktop Linux into it:
  lxc-create -t sfos-download -n Debian
  debian
  sid
  armhf
• start container:
  lxc-start -n Debian
• Manually change the the text "/usr/share/sailfish-containers/guest" to "/usr/share/harbour-containers/scripts/guest" (without quotes) in the /var/lib/lxc/Debian/config file.
• attach installed desktop:
  lxc-attach -n Debian
• run the initial setup:
  /mnt/guest/setup_desktop.sh
• run another setup:
  /mnt/guest/setups/debian.sh
• if you want to access the desktop via VNC, install vncserver:
  apt install tightvncserver
• this is required since sfos 4.4:
  apt install dbus-x11
• download Xwayland.armhf.libc-2.29.bin binary, rename it to Xwayland and copy into the desktop distro:
  cp /home/defaultuser/Downloads/Xwayland.armhf.libc-2.29.bin /home/.lxc/Debian/opt/bin/Xwayland
• set it to be executable:
  chmod +x /home/.lxc/Debian/opt/bin/Xwayland
• download debian-mouse.sh script.
• in fingerterm, start the script as user: debian-mouse.sh Debian p
• wait until the desktop Linux appears in a window

More info about the Full linux distros on Sailfish OS.

App Icon to start Desktop distro:
Create a 'Debian.desktop' file in /usr/share/applications/ with the following content (please realise the location of debian-mouse.sh script):
The icon named 'debian' is this icon that I copied into /usr/share/icons/hicolor/86x86/apps/

Any questions, comments and suggestions are welcome.

Last weekend I tested GPS navigation with Pure Maps and it worked very well.

Desktop Linux install instruction is updated.

Someone has created a video about installing this build on a Galaxy S4: [RAW] Installing Sailfish OS On A Samsung Galaxy S4

Hi it is possible to install Waydroid on this device ?

Waydroid currently isn't working on this port. It is WIP.

Fantastic port! I've just installed it on a fresh new Samsung S4 that I've found on my mail for my birthday. Keep Calm and port SFOS!!

A 4.4.0.72 build is ready. Wifi has fixed. Download is available in the first post.

Or the older version can be OTA updated into 4.4.0.72 in the following way:

great job! working wifi will greatly improve th UX
btw, im gonna guess if u ever get waydroid working, it'll be tight on ram, since s4 got only 2gb of ram...

Audio in calls is not routed properly. Calls are made and received but not sound is heard by neither the caller nor the receiver. I think this could be solved...it is a phone.

Also I have found maybe a reproducible bug. When I install Tooter client for Mastodon then after some minutes of use the screen gets black. The phone continues working but the screen stops working properly.

Thanks.