Active Topics
-
Porting apps to Leste (40)
to Maemo 7 / Leste by Maemish - 1 day, 21 hrs ago -
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 6 days, 1 hr ago - more...
|
2008-03-13
, 13:29
|
|
Posts: 118 |
Thanked: 26 times |
Joined on Feb 2008
|
#2
|
try "net:" as the port to use. That worked for me, at least in gnome-pilot, and has worked in the past for network sync in jpilot.
|
|
2008-03-13
, 20:18
|
|
Posts: 11 |
Thanked: 0 times |
Joined on Mar 2008
|
#3
|
That's working! Thanks a lot!!
Raph
Raph
 |
|
2008-03-13
, 23:10
|
|
Posts: 145 |
Thanked: 20 times |
Joined on Dec 2007
@ Seattle, WA USA
|
#4
|
jpilot for the n800?!? Wow, gotta find that, all of a sudden I could quit dragging the z31 around for the PIM functions :-) :-) :-)!!!
Going to check this out now, THANKS!
Going to check this out now, THANKS!
__________________
Nokia N800 - 24G (16G internal - 8G external) - KDE-3.5.8 :-)!
(2008-2?): RX-34_2008SE_2.2007.50-2_PR_COMBINED_MR0_ARM
iBlue 737 BT GPS - iGo Stowaway Ultra-Slim BT Keyboard.
Homebrew OTG cable and power injector.
Nokia N800 - 24G (16G internal - 8G external) - KDE-3.5.8 :-)!
(2008-2?): RX-34_2008SE_2.2007.50-2_PR_COMBINED_MR0_ARM
iBlue 737 BT GPS - iGo Stowaway Ultra-Slim BT Keyboard.
Homebrew OTG cable and power injector.
|
|
2008-06-12
, 04:30
|
|
Posts: 21 |
Thanked: 9 times |
Joined on Feb 2008
|
#5
|
Can someone help me debug this? I'm trying to do a network sync with jpilot. I used net: as the port in jpilot. I press the sync button in Jpilot and nothing appears to happen (howver I'm not sure what I should see when it does work). Then I press "Start Hotsync" on my n800. After a few seconds the N800 displays "Failed (Can't connect)".
Did some googling and tried the following linux command from desktop: pilot-xfer -p net:any -l
which is supposed to test the connection, bypassing jpilot. I get:
Listening for incoming connection on net:any...
and it just sits there forever, after I press "start hotsync" on the n800.
Any ideas would be truly appreciated.
Did some googling and tried the following linux command from desktop: pilot-xfer -p net:any -l
which is supposed to test the connection, bypassing jpilot. I get:
Listening for incoming connection on net:any...
and it just sits there forever, after I press "start hotsync" on the n800.
Any ideas would be truly appreciated.
|
|
2008-06-12
, 15:26
|
|
Posts: 21 |
Thanked: 9 times |
Joined on Feb 2008
|
#7
|
yes, I set my router up for static IP and have put the host IP in the GVM dialog. I forgot to mention that hotsync works fine with the Palm Desktop when I boot into Windows, but I use Linux 99% of the time, so am trying to get Jpilot to work.
Is there a daemon that needs to run in the background to allow jpilot to intercept the network connections?
Thanks.
Is there a daemon that needs to run in the background to allow jpilot to intercept the network connections?
Thanks.
| The Following User Says Thank You to rhkuo For This Useful Post: | ||
|
|
2008-06-13
, 00:00
|
|
Posts: 2,802 |
Thanked: 4,491 times |
Joined on Nov 2007
|
#8
|
No, jpilot (or pilot-xfer) is the network-listening daemon.
Just to eliminate any unrelated network issues, can you ping the Linux box from the tablet and/or vice versa?
Do you have firewalling enabled on the Linux side by any chance (see output of "sudo iptables -L -n")? GVM needs to be able to connect to your PC's TCP port 14238 for hotsync to work.
Just to eliminate any unrelated network issues, can you ping the Linux box from the tablet and/or vice versa?
Do you have firewalling enabled on the Linux side by any chance (see output of "sudo iptables -L -n")? GVM needs to be able to connect to your PC's TCP port 14238 for hotsync to work.
|
|
2008-06-13
, 04:48
|
|
Posts: 21 |
Thanked: 9 times |
Joined on Feb 2008
|
#9
|
Hi Ima,
Am I correct in assuming then that jpilot calls pilot-xfer? Does pilot-xfer need to be running in the background?
Pinging works both ways from the desktop to/from the n800.
As far as I know, I'm not running a software firewall, though I could be wrong if it's enabled by default (using SUSE 10.2). Here is the output of iptables; I'm not sure how to interpret it. Thanks for your help.
Am I correct in assuming then that jpilot calls pilot-xfer? Does pilot-xfer need to be running in the background?
Pinging works both ways from the desktop to/from the n800.
As far as I know, I'm not running a software firewall, though I could be wrong if it's enabled by default (using SUSE 10.2). Here is the output of iptables; I'm not sure how to interpret it. Thanks for your help.
Code:
# iptables -L -n Chain INPUT (policy DROP) target prot opt source destination ACCEPT 0 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT 0 -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED input_ext 0 -- 0.0.0.0/0 0.0.0.0/0 input_ext 0 -- 0.0.0.0/0 0.0.0.0/0 LOG 0 -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 LOG flags 6 level 4 prefix `SFW2-IN-ILL-TARGET ' DROP 0 -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination LOG 0 -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 LOG flags 6 level 4 prefix `SFW2-FWD-ILL-ROUTING ' Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT 0 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT 0 -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,E STABLISHED LOG 0 -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 LOG flags 6 level 4 prefix `SFW2-OUT-ERROR ' Chain forward_ext (0 references) target prot opt source destination Chain input_ext (2 references) target prot opt source destination DROP 0 -- 0.0.0.0/0 0.0.0.0/0 PKTTYPE = broadcast ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 0 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 14 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 18 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 3 code 2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTAB LISHED icmp type 5 reject_func tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:113 state NEW LOG 0 -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 PKTTYPE = multicast LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' DROP 0 -- 0.0.0.0/0 0.0.0.0/0 PKTTYPE = multicast LOG tcp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 tcp flags:0x17/0x02 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' LOG icmp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' LOG udp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' LOG 0 -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min bu rst 5 state INVALID LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT-INV ' DROP 0 -- 0.0.0.0/0 0.0.0.0/0 Chain reject_func (1 references) target prot opt source destination REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-res et REJECT udp -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-po rt-unreachable REJECT 0 -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-pr oto-unreachable
|
|
2008-06-13
, 06:55
|
|
Posts: 2,802 |
Thanked: 4,491 times |
Joined on Nov 2007
|
#10
|
Originally Posted by rhkuo
Looks like it is.
As far as I know, I'm not running a software firewall, though I could be wrong if it's enabled by default (using SUSE 10.2).
Here is the output of iptables; I'm not sure how to interpret it.
It looks like you need an ACCEPT rule for tcp dpt:14238 in the input_ext chain for network hotsync to get through. I'm afraid I'm not very familiar with SuSE, but have a look at this and this.
I'm having trouble setting up sync between jpilot and gvm.
I've found various ways of doing it (setting the serial port to use to ".":http://www.faqs.org/docs/Linux-HOWTO....html#SOFTWARE or using pppd http://howto.pilot-link.org/ppp/cd.html ), but none worked.
Could someone confirm the procedure to follow? I'm running Jpilot 0.99.9.10 on Ubuntu 7/10.
Thanks in advance!
Raph