Active Topics

 


Reply
Thread Tools
Posts: 10 | Thanked: 1 time | Joined on Apr 2008
#1
Hi just got the device in the mail today from UPS guy.

Anyways the led had the charging scrolling battery animated. For good full hour Anyways I pulled the plug somehow and plug it back in now I don't get any led charging thing on my new n800 nokia. Had bad luck this evening. What is good way to fix it? I saw some post put in a freezer in a bag is that really true? How can I get it charge since I pull the plug on it while it was so charging? That made me mad. I really wanted to used the Nokia tonight to bad.

Last edited by at_n008; 2008-04-10 at 22:43. Reason: Grammer Edit
 
GeneralAntilles's Avatar
Posts: 5,478 | Thanked: 5,222 times | Joined on Jan 2006 @ St. Petersburg, FL
#2
http://www.internettablettalk.com/fo...32&postcount=2

Originally Posted by GeneralAntilles View Post
Stick the device on the charger and leave it there. It'll eventually power itself on into charging mode, after that, follow these instructions exactly:

Install xterm and becomeroot
  1. Boot the device normally by holding down the power button, you can unplug the charger once the device is booted.
  2. After the device is booted, you need to install xterm.
  3. Tapping HERE on the tablet should install xterm for you.
  4. Tap HERE to install the becomeroot package.
Reboot the Device
  1. Assuming xterm installed correctly, then open it up (should be in Extras in the Application Menu).
  2. Plug the device into one of the USB ports on your computer.
  3. Since reboot requires a root shell, type sudo gainroot and hit enter.
  4. After you have a root shell, type reboot and hit enter.
  5. Then as soon as you hit enter, begin holding down the Home key, and don't let go until you see a USB logo in the upper right of the Nokia splash screen.
Flash the Device
  1. If you see the USB logo at the Nokia splash screen, then the device is now waiting to be flashed.
  2. Go ahead and plug the barrel charger in in case the download takes a long time.
  3. Now, start the flasher and let it flash the device.

After the flasher's done, the device will be running the latest firmware and you should have no more problems powering on.
 

The Following User Says Thank You to GeneralAntilles For This Useful Post:
Posts: 10 | Thanked: 1 time | Joined on Apr 2008
#3
Wait I can't turn it on still because the battery is not working. Confused?

Last edited by at_n008; 2008-04-10 at 22:51.
 
GeneralAntilles's Avatar
Posts: 5,478 | Thanked: 5,222 times | Joined on Jan 2006 @ St. Petersburg, FL
#4
Originally Posted by at_n008 View Post
Wait I can't turn it on still because the battery is not working. Confused?
You can't turn it on because of an OMAP timing issue that results in a race condition preventing boot up. It has nothing to do with the battery.
 
Posts: 10 | Thanked: 1 time | Joined on Apr 2008
#5
ok your saying because of a OMPA timing issue hmmm teach me how to fix that?! Because my charging adpeter not showing the Charging Screen well anthor story I call that place back up where I order it from. Its a 30 day exchange for free I told them the issue well maybe I can keep trying then if it works I can cancel the exchange request.

Last edited by at_n008; 2008-04-11 at 01:18.
 
GeneralAntilles's Avatar
Posts: 5,478 | Thanked: 5,222 times | Joined on Jan 2006 @ St. Petersburg, FL
#6
Originally Posted by at_n008 View Post
ok your saying because of a OMPA timing issue hmmm teach me how to fix that?!
See the steps in my post.

Either you stick it on the charger and wait it out (anywhere from 15 minutes to 8 hours), or you stick it in the freezer for about 5 or 10 minutes (plastic bag can reduce condensation), plug it into USB on your computer, start the flasher, and power on the unit holding down the Home button.
 
Posts: 10 | Thanked: 1 time | Joined on Apr 2008
#7
Originally Posted by GeneralAntilles View Post
See the steps in my post.

Either you stick it on the charger and wait it out (anywhere from 15 minutes to 8 hours), or you stick it in the freezer for about 5 or 10 minutes (plastic bag can reduce condensation), plug it into USB on your computer, start the flasher, and power on the unit holding down the Home button.
oh ok I understand now thanks.
I let it do it long I charge it over night. Then I test it in the morning and load flasher up.

Last edited by at_n008; 2008-04-11 at 01:45.
 
zeleftikam's Avatar
Posts: 66 | Thanked: 7 times | Joined on Jan 2008 @ Madison, WI
#8
This happened to me all the time. I returned my N800 and bought a new one. No problems now.
 
Posts: 10 | Thanked: 1 time | Joined on Apr 2008
#9
Originally Posted by zeleftikam View Post
This happened to me all the time. I returned my N800 and bought a new one. No problems now.
Well I return my back in the Mail just like you did zelefgtikam. Now sometimes next week I should get the good one. Yes my was deffected. I own Nokia Cellphone I like it allot I never had issues with Nokia before with a Cellphone. Well this one is a Internet Tablet deffrent the a mobile cell phone. Wish me luck on next one I get back.
 
Reply


 
Forum Jump


All times are GMT. The time now is 15:13.