Active Topics
-
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 1 day, 13 hrs ago -
TLS 1.2 for N9 is ready (28)
to MeeGo / Harmattan by smartblu9 - 1 day, 14 hrs ago -
Maemo repository (3)
to Community by torsen - 2 days, 6 hrs ago -
Error after installing Leste on sdcard (11)
to Maemo 7 / Leste by Maemish - 3 days, 3 hrs ago -
Introducing ubiboot N9 (multiboot OS loader) (1,393)
to Alternatives by smatkovi - 4 days, 10 hrs ago - more...
 |
|
2008-08-03
, 23:12
|
|
Posts: 5,478 |
Thanked: 5,222 times |
Joined on Jan 2006
@ St. Petersburg, FL
|
#2
|
Yes, use the correct flasher command.
Code:
./flasher-3.0 -F RX-34_DIABLO_4.2008.23-14_PR_COMBINED_MR0_ARM.bin -f -R
|
|
2008-08-03
, 23:21
|
|
Posts: 38 |
Thanked: 7 times |
Joined on Dec 2007
@ Colorado
|
#3
|
Yep, that's it. Sheesh. Thanks, GeneralAntilles. I was thinking I had a bad download.
__________________
If at first you don't succeed, don't take up skydiving. - Anonymous
If at first you don't succeed, don't take up skydiving. - Anonymous
|
|
2008-08-04
, 03:24
|
|
Posts: 38 |
Thanked: 7 times |
Joined on Dec 2007
@ Colorado
|
#4
|
Follow-up. I'm restoring various applications, and mytube keeps failing. When I drop to root to try apt-get install mytube, I get some interesting error messages:
osso-software-version-rx34: Depends: flash-and-reboot (=3) but it is not going to be installed
Depends: initfs-flasher (=0.95.16.-200823maemo2) but it is not going to be installed
Depends: kernel-diablo-flasher (=2.6.21-200823maemo3) but it is not going to be installed.
So I'm wondering: was the flash method I used sufficient to bring everything up to date? (And that method was the single flasher command above.)
osso-software-version-rx34: Depends: flash-and-reboot (=3) but it is not going to be installed
Depends: initfs-flasher (=0.95.16.-200823maemo2) but it is not going to be installed
Depends: kernel-diablo-flasher (=2.6.21-200823maemo3) but it is not going to be installed.
So I'm wondering: was the flash method I used sufficient to bring everything up to date? (And that method was the single flasher command above.)
__________________
If at first you don't succeed, don't take up skydiving. - Anonymous
If at first you don't succeed, don't take up skydiving. - Anonymous
|
|
2008-08-04
, 03:36
|
|
Posts: 5,478 |
Thanked: 5,222 times |
Joined on Jan 2006
@ St. Petersburg, FL
|
#5
|
Please remember to google any errors messages that come up. This issue has been covered many times.
http://www.internettablettalk.com/fo...&postcount=308
http://www.internettablettalk.com/fo...&postcount=308
|
|
2008-10-23
, 00:59
|
|
Posts: 14 |
Thanked: 2 times |
Joined on Sep 2008
|
#6
|
Originally Posted by GeneralAntilles
where would you enter that when flashing your tablet?
Yes, use the correct flasher command.
Code:./flasher-3.0 -F RX-34_DIABLO_4.2008.23-14_PR_COMBINED_MR0_ARM.bin -f -R
|
|
2008-10-23
, 01:10
|
|
Posts: 5,478 |
Thanked: 5,222 times |
Joined on Jan 2006
@ St. Petersburg, FL
|
#7
|
Originally Posted by SeanLynch
http://wiki.maemo.org/Updating_the_tablet_firmware
where would you enter that when flashing your tablet?
__________________
Ryan Abel
Ryan Abel
 |
| Tags |
| n800 flasher3 diablo |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 23:58.
1. Plugged in the Internet Tablet (N800) but turned it off.
2. Typed from the same Linux subdirectory
./flasher-3.0 RX-34_DIABLO_4.2008.23-14_PR_COMBINED_MR0_ARM.bin -f -R
I got the message that
Suitable USB device not found, waiting
then turned it on, holding the Home key
USB device found found at bus 003, device address 021
Found device RX-34, hardware revision 1301
NOLO version 1.1.7
Version of 'sw-release': <no version>
Then the root prompt. Then -- nothing. It sat for quite awhile, apparently doing nothing at all, with the USB icon in the upper right corner. I checked that the Flasher 3.0 is set to execute. I tried the whole thing again in root.
Any advice?
If at first you don't succeed, don't take up skydiving. - Anonymous