Active Topics
-
Maemo repository (9)
to Community by nokiafemboy - 9 hrs, 55 mins ago -
Error after installing Leste on sdcard (18)
to Maemo 7 / Leste by Maemish - 1 day, 1 hr ago -
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 2 days, 20 hrs ago -
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 2 days, 20 hrs ago -
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 5 days ago - more...
|
2010-06-09
, 10:15
|
|
Posts: 1,751 |
Thanked: 844 times |
Joined on Feb 2010
@ Sweden
|
#2
|
To my knowledge most have settled for 250mhz as minimum. You will have a better flow on 500mhz but a little bit more batterydrain (my opinion).
The most important thing is not to leave the charger in when it is done (i.e. green led). In other case charge when you have time. It will not improve if you run it to dead.
By skipping frequencies you are avoiding them. It will be on less step to take and it will use less battery. You need to make a custom profile by "kernel-config save myconfig" and then run it by "kernel-config load my config".. to edit you can open it with "leafpad /home/user/.kernel/myconfig" (need to have leafpad installed)
The best way is to use the "kernel-config lock <freq>" and try them one by one.
No other programs are needed. Though some script could be useful.
Programs that give you control over your connections are good. It is better to run 2g than 3g and you will not always need wifi. BatteryGraph. Try keep away from bluetooth. Don't put too much widgets up if not needed. Do as much as possible in the xterminal. The commands "top", "kernel-config show" or "df -h" in terminal is mostly better than Conky.
My phone hold battery 48h+. Don't actually know anymore because i always find time to recharge before it depleats.
The most important thing is not to leave the charger in when it is done (i.e. green led). In other case charge when you have time. It will not improve if you run it to dead.
By skipping frequencies you are avoiding them. It will be on less step to take and it will use less battery. You need to make a custom profile by "kernel-config save myconfig" and then run it by "kernel-config load my config".. to edit you can open it with "leafpad /home/user/.kernel/myconfig" (need to have leafpad installed)
The best way is to use the "kernel-config lock <freq>" and try them one by one.
No other programs are needed. Though some script could be useful.
Programs that give you control over your connections are good. It is better to run 2g than 3g and you will not always need wifi. BatteryGraph. Try keep away from bluetooth. Don't put too much widgets up if not needed. Do as much as possible in the xterminal. The commands "top", "kernel-config show" or "df -h" in terminal is mostly better than Conky.
My phone hold battery 48h+. Don't actually know anymore because i always find time to recharge before it depleats.
|
|
2010-06-09
, 12:25
|
|
Posts: 1,751 |
Thanked: 844 times |
Joined on Feb 2010
@ Sweden
|
#3
|
Originally Posted by bman
More desktops will use more power.. Though pretty moderate. The more widgets on this desktops will probably use more power though.. I don't remember how you do it.
...i read something about a possible 9 desktops??
---- and wiil having more desktops active use more power?
hopefully some1 can give me some guidance or point me in a direction i havent found yet, im sure when u understand its easy to find just having trouble at the moment
also call me stupid but b4 u do where do i find settings for how to use programs... ... eg http://maemo.org/downloads/product/Maemo5/catorise/ its only that he posted in there how to move the items yet most dont have that..
Instead of doing the wiz way with "vi" you could download and install "leafpad". And then open the file with "leafpad /home/opt/catorise/menu" in xterminal.. in there it is pretty self explainatory. Just move the category for the program you like to move.
|
|
2010-06-10
, 04:38
|
|
Posts: 112 |
Thanked: 24 times |
Joined on May 2010
@ New Zealand
|
#4
|
Originally Posted by bman
ok so after reading 2000 post out of a possible 2million all with old and conflicting answers and pages spread everywhere and also not knowing where to look i thought id ask a few questions
iv had the fone a few weeks and only just started having a play with it
i have followed this to install and overclock and is working fine
http://talk.maemo.org/showthread.php...582#post595582
and have even set to starving and is working fine atm although havent done much testing as of yet
my questions are
-to save battery is it better to run min at 125mhz or 250mhz than 500mhz and how much battery is saved? is it worth it..?
Why don't u try it out?? Use battery monitoring apps like Battery graph or batteryeye and see how the performance and battery life changes. Everyone uses their phone differently so it's best to do a test for yourself, it's not hard or anything, just let your phone run for a whole day doing what you normally do, and switch to a different overclock/underclock and try it out.
-is it noticeably slower running min at 125mhz than 500mhz?
-what is the best way to charge the battery for it to last longer eg. run it to dead then charge or 1-5% charge or just whenever?
From what i've read for the Nokia N900 battery saving tips, it's best to charge it whenever you can. Not too much though, but just charge it when it's depleted to a low percentage. It's not good to let it die down to 0% and charge, that's only good certain types of battery, and Nokia N900's battery isn't this type.
-i have seen alot of ppl showing there own voltage profiles and skipping certain frequencies how do i set/change that?
Did u really search??? Ur asking a lot of questions that were answered in most of the common topics....
-what programs are good for testing stability and for how long?
From what i know, there isn't any. You have to test it by urself, just like i answered for ur first question. Stability isn't much of an issue though, just stick to the advices that other people gave and u'll be fine. It's better to follow the results posted by others than to try to overclock or underclock to an extreme value. To be honest, u won't get much difference in overclocking or underclocking, at least that's the conclusion I got from my experiment and testing.
-recommended apps, programs for oc?
Again, i'm sure u didn't search on this. It's very easy. I only just did it 4 or 5 days ago.
-recommended apps, programs for powersaving?
-and unrelated to oc and powersaving what are some good general apps out there?
- i read something about a possible 9 desktops??
---- and wiil having more desktops active use more power?
It's called Desktop Activity, download it from the APP Manager.
hopefully some1 can give me some guidance or point me in a direction i havent found yet, im sure when u understand its easy to find just having trouble at the moment
also call me stupid but b4 u do where do i find settings for how to use programs... ... eg http://maemo.org/downloads/product/Maemo5/catorise/ its only that he posted in there how to move the items yet most dont have that..
There isn't a setting for Cateroize, at least i don't think there is. It just automatically sorts anything you download and installed by itself. The only thing you can do however is reorganize the apps the way you want, i.e manually. But there isn't any major settings to it.
I suggest you search on battery saving tips as well as overclocking, you'll find everything u need there.
EDIT:
In fact i'll help u out even more, read these 2 posts, that's all you need on overclocking.
http://talk.maemo.org/showpost.php?p...&postcount=774
http://talk.maemo.org/showpost.php?p...postcount=3947
and just to add in a bit more info on what I said earlier, when i said that overclocking and underclocking don't make too much differences on the battery life, it's because it's related to the power saving kernels that you use. I read it a while ago but I forgot, but anyway the battery life should be around the same as if you were running stock, or probably better. You'll find the explanations in jakiman's topic on overclocking.
Anyway i'm now constantly running 850MHZ overclocked and 500MHZ minimum (base), and from what i've tested so far it's pretty much the same battery drain. So ya, what i said is based on my testing and experiment, so it shouldn't make too much difference. What matters is how you use your phone, try not to listen to music and use wifi or bluetooth too much etc, because those are the primary concerns of battery drain. Just trying to find tips and advice on underclocking etc to save battery life isn't that much of a help. Powerful phones tend to drain battery more quickly, and this isn't really a phone but rather a mini computer......so ya.
Last edited by chaoscreater; 2010-06-10 at 04:48.
|
|
2010-06-10
, 08:42
|
|
Posts: 122 |
Thanked: 17 times |
Joined on Jun 2010
|
#5
|
Why don't u try it out?? Use battery monitoring apps like Battery graph or batteryeye and see how the performance and battery life changes. Everyone uses their phone differently so it's best to do a test for yourself, it's not hard or anything, just let your phone run for a whole day doing what you normally do, and switch to a different overclock/underclock and try it out.
was already running ideal 500 850
and changed to starving 250 850 2day (also with wifi disabled, 2g instead of 3g) and still using the same battery usage basicly mirroring yesterdays!!!!!!???
dont use it for music or video havent had bluetooth on and still only getting 1 day or 2 if im super lucky
EDIT:
In fact i'll help u out even more, read these 2 posts, that's all you need on overclocking.
http://talk.maemo.org/showpost.php?p...&postcount=774
http://talk.maemo.org/showpost.php?p...postcount=3947
thanks guys when i get a bit of spare time ill have more of a play with the overclocking/power settings
|
|
2010-06-10
, 11:34
|
|
Posts: 25 |
Thanked: 0 times |
Joined on Feb 2010
|
#6
|
I have just overclocked mine for the first time and all seems fine. However, following the wiki. I need to reload the settings everytime I turn my phone off, is there a way to save the settings I am happy with (that appear to be working)
 |
|
2010-06-10
, 11:39
|
|
Posts: 27 |
Thanked: 3 times |
Joined on Mar 2010
@ Scotland
|
#7
|
Originally Posted by Jamiec902
Yeah, save the stock setup as "stock"
I have just overclocked mine for the first time and all seems fine. However, following the wiki. I need to reload the settings everytime I turn my phone off, is there a way to save the settings I am happy with (that appear to be working)
then setup your settings. Then save as "myconfig"
Then set default to be "mycongfig"
.... Done
iv had the fone a few weeks and only just started having a play with it
i have followed this to install and overclock and is working fine
http://talk.maemo.org/showthread.php...582#post595582
and have even set to starving and is working fine atm although havent done much testing as of yet
my questions are
-to save battery is it better to run min at 125mhz or 250mhz than 500mhz and how much battery is saved? is it worth it..?
-is it noticeably slower running min at 125mhz than 500mhz?
-what is the best way to charge the battery for it to last longer eg. run it to dead then charge or 1-5% charge or just whenever?
-i have seen alot of ppl showing there own voltage profiles and skipping certain frequencies how do i set/change that?
-what programs are good for testing stability and for how long?
-recommended apps, programs for oc?
-recommended apps, programs for powersaving?
-and unrelated to oc and powersaving what are some good general apps out there?
- i read something about a possible 9 desktops??
---- and wiil having more desktops active use more power?
hopefully some1 can give me some guidance or point me in a direction i havent found yet, im sure when u understand its easy to find just having trouble at the moment
also call me stupid but b4 u do where do i find settings for how to use programs... ... eg http://maemo.org/downloads/product/Maemo5/catorise/ its only that he posted in there how to move the items yet most dont have that..
Last edited by bman; 2010-06-09 at 10:00.