Active Topics
-
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,580)
to Nokia N9 / N950 by aspergerguy - 12 hrs, 39 mins ago -
Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 3 days, 9 hrs ago -
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 3 days, 21 hrs ago -
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 4 days, 11 hrs ago - more...
 |
|
2011-04-11
, 06:17
|
|
Posts: 549 |
Thanked: 299 times |
Joined on Jun 2010
@ Australian in the Philippines
|
#2
|
It somewhat depends on which part of the eMMC you are talking about. If it's the 27 gig partition, then probably the easiest way is to connect your phone in mass storage mode to a windows machine and run the check disk thing over it. (Or if you have Linux you could use fsck.vfat / dosfsck - or just use the same tools on the n900 itself, though unmount /dev/mmcblk0p1 first)
If it's the 2 gig partition I'd be inclined to run android (or ubuntu or something) from the external memory card so it can be unmounted, then use the same tools to check it.
If it's the 2 gig partition I'd be inclined to run android (or ubuntu or something) from the external memory card so it can be unmounted, then use the same tools to check it.
|
|
2011-04-12
, 06:50
|
|
Posts: 86 |
Thanked: 0 times |
Joined on May 2010
@ india
|
#3
|
Originally Posted by dchky
thanx for the solution !!
it somewhat depends on which part of the emmc you are talking about. If it's the 27 gig partition, then probably the easiest way is to connect your phone in mass storage mode to a windows machine and run the check disk thing over it. (or if you have linux you could use fsck.vfat / dosfsck - or just use the same tools on the n900 itself, though unmount /dev/mmcblk0p1 first)
if it's the 2 gig partition i'd be inclined to run android (or ubuntu or something) from the external memory card so it can be unmounted, then use the same tools to check it.
__________________
abhi ............
abhi ............
It's a wierd problem ! today when i tried to copy a file(217kb) from my sd card to EMMC , it says .... the destination is read only ! what to do
TIA !
abhi ............