Active Topics
-
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 2 hrs, 32 mins ago -
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 2 hrs, 48 mins ago -
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 2 days, 6 hrs ago -
Maemo repository (8)
to Community by Maemish - 6 days ago - more...
 |
|
2007-07-22
, 03:43
|
|
Posts: 641 |
Thanked: 27 times |
Joined on Apr 2007
|
#2
|
Uhh, you might want to search for "usb charge". There's a whole thread dedicated to it. Never mind, here it is.
http://www.internettablettalk.com/fo...ght=usb+charge
http://www.internettablettalk.com/fo...ght=usb+charge
__________________
Just because you are online, doesn't mean you don't have to form a full sentence.
SEARCH! It's probably already been answered.
Just because you are online, doesn't mean you don't have to form a full sentence.
SEARCH! It's probably already been answered.
 |
|
2007-07-22
, 05:02
|
|
Posts: 10 |
Thanked: 0 times |
Joined on Jul 2007
|
#3
|
Originally Posted by fadingdust
There is a good chance that it will work; the usb connector does not provide power even in host mode so there is low risk (WARNING ! IMHO...) of any damage if you "inject" power through and wire it up to the power jack. Good luck !
So I was recharging my lovely n800, when the cable got yanked and thus broke the power jack inside (power cable is wobbley when plugged in).
I've pryed the bugger open (by *making my own* torx screwdriver) to reveal, wonder-of-all-wonders, the power adapter is a 2mm x 2mm x 4mm snap-in piece! This means I just need to buy/manufacture a new one.
But my question is (other than where to buy a replacement jack):
Can I jump a wire from the mini-usb line over to the terminals, thus powering my n800 via the mini-usb jack?
I'm not exactly a EE (though many a friend i have are)..
I've got a usb spec here: http://pinouts.ru/SerialPortsCables/...e_pinout.shtml
How would I go about wiring it? I'm off to radio shack tomorrow for a voltage-tester for starters..
Anyone up for the challenge?
|
|
2007-07-22
, 18:00
|
|
Posts: 7 |
Thanked: 0 times |
Joined on Jul 2007
|
#4
|
No no, I believe you've misunderstood. I've already seen that thread, that's not it at all. I'm referring to recharging the n800 through the mini-usb port on the n800 instead of thru the power jack on the n800. All clear now?
|
|
2007-07-22
, 19:39
|
|
Posts: 641 |
Thanked: 27 times |
Joined on Apr 2007
|
#5
|
Originally Posted by fadingdust
No no, I believe you've misunderstood. I've already seen that thread, that's not it at all. I'm referring to recharging the n800 through the mini-usb port on the n800 instead of thru the power jack on the n800. All clear now?
Sorry, wrong link...
This one is for the 770, but the idea is the same.http://www.internettablettalk.com/fo...ght=usb+charge
__________________
Just because you are online, doesn't mean you don't have to form a full sentence.
SEARCH! It's probably already been answered.
Just because you are online, doesn't mean you don't have to form a full sentence.
SEARCH! It's probably already been answered.
|
|
2007-08-06
, 16:22
|
|
Posts: 106 |
Thanked: 11 times |
Joined on Jun 2007
|
#6
|
I made the modification for my n800 and it's working 'quite' great :
- when I plug the normal power cable, it detects usb connection and unmount all my cards !
- also when I plug the usb adapter, the cards are unmounted... but I need them ! (ex : with Maemo Mapper)
Is there a way to prevent unmounting cards when you plug usb cable ? (by software configuration)
- I leave it plugged all the night(6-7hours) but it was not fully charged ?! strange...
- there is also an icon bug (the left one ; maybe normal, I never tried usb cable before) :
- when I plug the normal power cable, it detects usb connection and unmount all my cards !
- also when I plug the usb adapter, the cards are unmounted... but I need them ! (ex : with Maemo Mapper)
Is there a way to prevent unmounting cards when you plug usb cable ? (by software configuration)
- I leave it plugged all the night(6-7hours) but it was not fully charged ?! strange...
- there is also an icon bug (the left one ; maybe normal, I never tried usb cable before) :
|
|
2007-09-04
, 23:37
|
|
Posts: 35 |
Thanked: 1 time |
Joined on Mar 2007
|
#7
|
Originally Posted by murphy
I wanted to make that mod for a while, but I was slightly apprehensive because I didnt want to kill the n800, and I also never got around to trying it. I know you asked for software, but the easiest solution is a mini switch.
Is there a way to prevent unmounting cards when you plug usb cable ? (by software configuration)
 |
|
2007-09-05
, 12:18
|
|
Posts: 11,700 |
Thanked: 10,045 times |
Joined on Jun 2006
@ North Texas, USA
|
#8
|
Murphy, any idea what charge rate you're seeing with this mod? Could you do some comparisons between normal charging and your modded charging?
|
|
2007-09-05
, 14:03
|
|
Posts: 2,152 |
Thanked: 1,490 times |
Joined on Jan 2006
@ Czech Republic
|
#9
|
Originally Posted by murphy
A diode could fix that. The current should go from usb to power jack but not in the other direction.
- when I plug the normal power cable, it detects usb connection and unmount all my cards !
Originally Posted by murphy
Yes, this is definitely solvable. Quick and dirty way is to edit
- also when I plug the usb adapter, the cards are unmounted... but I need them ! (ex : with Maemo Mapper)
Is there a way to prevent unmounting cards when you plug usb cable ? (by software configuration)
/usr/sbin/osso-mmc-umount.sh to return error. Just put 'false' command somewhere in the beginning. That would of course kill the usb storage feature altogether. It also shows error dialog. As another solution you could open some file from memory card (video? song?) before plugging in power. Same dialog should appear and card should be still usable after that.
__________________
Newbies click here before posting. Thanks.
If you really need to PM me with troubleshooting question please consider posting it to the forum instead. It is OK to PM me a link to such post then. Thank you.
Newbies click here before posting. Thanks.
If you really need to PM me with troubleshooting question please consider posting it to the forum instead. It is OK to PM me a link to such post then. Thank you.
|
|
2007-09-05
, 14:32
|
|
Posts: 11,700 |
Thanked: 10,045 times |
Joined on Jun 2006
@ North Texas, USA
|
#10
|
Oh yeah, completely forgot about the diode fix-- good call fanoush!
I've pryed the bugger open (by *making my own* torx screwdriver) to reveal, wonder-of-all-wonders, the power adapter is a 2mm x 2mm x 4mm snap-in piece! This means I just need to buy/manufacture a new one.
But my question is (other than where to buy a replacement jack):
Can I jump a wire from the mini-usb line over to the terminals, thus powering my n800 via the mini-usb jack?
I'm not exactly a EE (though many a friend i have are)..
I've got a usb spec here: http://pinouts.ru/SerialPortsCables/...e_pinout.shtml
How would I go about wiring it? I'm off to radio shack tomorrow for a voltage-tester for starters..
Anyone up for the challenge?