Active Topics

 


Reply
Thread Tools
gowreesan is offline gowreesan
2012-02-17 , 01:24
Posts: 9 | Thanked: 2 times | Joined on Feb 2012 @ Chennai
#1
Hi...

I trying to flash Nokia N900. While I connect with system “Device driver software was not successfully installed “ error shows.

Unable to connect with system.. Plz advice.

i checked with Windows 7 and XP.
 
Dersonne is offline Dersonne
2012-02-17 , 12:04
Posts: 98 | Thanked: 71 times | Joined on Sep 2011 @ Manila
#2
have you download the maemo flasher 3.5?download it on firefox
.
 

The Following User Says Thank You to Dersonne For This Useful Post:
gowreesan is offline gowreesan
2012-02-20 , 01:35
Posts: 9 | Thanked: 2 times | Joined on Feb 2012 @ Chennai
#3
i downloaded maemo flasher 3.5..
i can't connect My mobile.

uninstall and again install PC suite also. even-though unable to connect with PC.

In cmd, "Waiting for Suitable device found" error shows.

Phone is continuously rebooting.
 
Virtuality's Avatar
Virtuality is offline Virtuality
2012-02-20 , 03:01
Posts: 101 | Thanked: 61 times | Joined on Dec 2011
#4
Is your windows a 32-bit version or 64-bit ?
 
Virtuality's Avatar
Virtuality is offline Virtuality
2012-02-20 , 03:05
Posts: 101 | Thanked: 61 times | Joined on Dec 2011
#5
If your windows is a 64-bit version then try this :

http://talk.maemo.org/showpost.php?p...0&postcount=20
 

The Following User Says Thank You to Virtuality For This Useful Post:
gowreesan is offline gowreesan
2012-02-22 , 01:56
Posts: 9 | Thanked: 2 times | Joined on Feb 2012 @ Chennai
#6
Originally Posted by Virtuality View Post
If your windows is a 64-bit version then try this :

http://talk.maemo.org/showpost.php?p...0&postcount=20

Thanks friend.... Mine is win 64... hope it'll work!!!!!!!!
 
gowreesan is offline gowreesan
2012-02-23 , 01:40
Posts: 9 | Thanked: 2 times | Joined on Feb 2012 @ Chennai
#7
Still I can’t flash my N900.

It is continuously rebooting.

I removed battery and insert when it connected with PC.

I tried Xp and Win 7.

In XP, it shows “NEW Hardware found” then it shows “This device not working properly….bcz of driver not installed successfully”

In Windows 7, even it not shows new device found.
 
misterc's Avatar
misterc is offline misterc
2012-02-23 , 02:11
Posts: 1,625 | Thanked: 998 times | Joined on Aug 2010
#8
Originally Posted by gowreesan View Post
Still I can’t flash my N900.

It is continuously rebooting.

I removed battery and insert when it connected with PC.

I tried Xp and Win 7.

In XP, it shows “NEW Hardware found” then it shows “This device not working properly….bcz of driver not installed successfully”

In Windows 7, even it not shows new device found.
can't help you with the LostDOS (aka windooooz) stuff, but i have a comparable problem; on openSUSE (no matter whether 32 or 64 bits) the OS catches new devices & mounts them, pretty much like windooooz does, in fact; i use SystemRescueCd (based on Gentoo) whenever i have to re flash.
if you have a spare memory card (& reader to boot on) or USB stick, you can also use LinuxLive USB Creator
you can even boot into a basic X environment, mount any NTFS partition with ntfs-3g
Code:
~ # ntfs-3g /dev/sda1 /mnt/windows
and then start the flasher
obviously, you have to download the Linux version of flasher for that
you can use maemo_flasher-3.5_2.5.2.2.tar.gz

you probably won't able to run the Linux program from the NTFS partition, so you would have to copy it to bin

Code:
~ # cd /mnt/windows/bin/
/mnt/windows/bin # cp flasher-3.5 /bin
/mnt/windows/bin # chmod 755 /bin/flasher-3.5
/mnt/windows/bin # cd {to where you extracted images}
{...} # flasher-3.5 -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f -R
if you have a wired network (or easily can connect to a wireless) system rescue cd comes with FireFox & net support, so you could actually open this page once in SRCD & download, copy & all there
Last edited by misterc; 2012-02-24 at 01:49. Reason: corrected paths
 

The Following User Says Thank You to misterc For This Useful Post:
Virtuality's Avatar
Virtuality is offline Virtuality
2012-02-23 , 21:34
Posts: 101 | Thanked: 61 times | Joined on Dec 2011
#9
Did you download libusb-win32-bin-1.2.2.0.zip to your computer? After that connect your n900 to your computer and run the inf-wizard.exe (which is found in the bin folder of the libusb-win32-bin-1.2.2.0.zip).

After that press next and wait until your device is detected among the list and then when your device appears among the list choose it and press next.
Give it several tries.
 

The Following User Says Thank You to Virtuality For This Useful Post:
gowreesan is offline gowreesan
2012-02-24 , 02:00
Posts: 9 | Thanked: 2 times | Joined on Feb 2012 @ Chennai
#10
Originally Posted by Virtuality View Post
Did you download libusb-win32-bin-1.2.2.0.zip to your computer? After that connect your n900 to your computer and run the inf-wizard.exe (which is found in the bin folder of the libusb-win32-bin-1.2.2.0.zip).

After that press next and wait until your device is detected among the list and then when your device appears among the list choose it and press next.
Give it several tries.
Thanks Friend....

After install "libusb", successfully connected with PC. Thanks friend!!!!!!!!
 
Reply

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 14:38.

Contact Us - Home - Archive - Top