Active Topics

 


Page 1 of 3 1 23
Reply
Thread Tools
tehbeto is offline tehbeto
2015-05-30 , 00:50
Posts: 8 | Thanked: 0 times | Joined on May 2015 @ México
#1
Hello! First, sorry for my english.

I have a N9 with some problems, first I tried to flash with Flasher, but it didn't work, so I tried with Phoenix, and nothing, already I tried with 3 differents versions, RM-696 NDT LTA BLACK 16GB (059J260), N9 RM-696 Telcel MX MX Black V3 (059L449) and RM-696 NDT MEA5 BLACK 16GB (059J223) from mrcrab.net; Flasher shows the software of the phone is DFL61_HARMATTAN_40.2012.21-3.265.6_PR_265, I think that is a problem of firmware downgrade, but I don't find the original software version of the phone.

Any suggestion?

Thankss
 
chilango is offline chilango
2015-05-30 , 03:10
Posts: 509 | Thanked: 626 times | Joined on Jul 2012 @ Mexico/Germany
#2
i did not work is nothing helpfull.
I'am also have a 16GB Telcel N9

What you do with flasher and what exactly is showing in terminal?
What is the exactly error message?

If you dowd the firmware, i have here the Telcel FW stored.
 
tehbeto is offline tehbeto
2015-05-30 , 15:23
Posts: 8 | Thanked: 0 times | Joined on May 2015 @ México
#3
Originally Posted by chilango View Post
i did not work is nothing helpfull.
I'am also have a 16GB Telcel N9

What you do with flasher and what exactly is showing in terminal?
What is the exactly error message?

If you dowd the firmware, i have here the Telcel FW stored.
Hello chilango!! I guess you are from México spanish please

I use the guide in wiki.maemo.org/Flashing_N9, the error message from Flasher is:

bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed <1355317350>
[Pipe 0] Finishing in error state with status 10

The phone only shows, for a second the progress bar, but immediately disappears.

Thanks chilango!!
 
tehbeto is offline tehbeto
2015-05-30 , 15:30
Posts: 8 | Thanked: 0 times | Joined on May 2015 @ México
#4
Originally Posted by chilango View Post
i did not work is nothing helpfull.
I'am also have a 16GB Telcel N9

What you do with flasher and what exactly is showing in terminal?
What is the exactly error message?

If you dowd the firmware, i have here the Telcel FW stored.
Hello chilango!! I guess are you from México
spanish please

The error message from Flasher is:

Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1355317350)
[Pipe 0] Finishing in error state with status 10

The phone only shows, for a second the progress bar, but immediately dissappears.

Thanks chilango!!
 
aspergerguy is offline aspergerguy
2015-05-30 , 17:59
Posts: 807 | Thanked: 1,589 times | Joined on Aug 2014
#5
You could try Swiss product code 059L5D4 as was the highest number that I could find to get an N9 of unknown provenance working again: DFL.61_Harmattan_40.2012.21.3.480.04.1PR_LEGACY_48 0_ARM_RM-696_PRD.signed.bin
 
chilango is offline chilango
2015-05-30 , 21:54
Posts: 509 | Thanked: 626 times | Joined on Jul 2012 @ Mexico/Germany
#6
aspergerguy tiene razon, parece que no tienes el SW de Telcel or alguien instaló un software mas reciente.
Lo que cuenta es el numero atras.
DFL61_HARMATTAN_40.2012.21-3.420.4_PR_LEGACY_420_ARM_RM-696_PRD_signed.bin

Aqui de Telcel es el 420, lo que necesitas es un Software igual o arriba de 420. Si alguien installo un software mas arriba necesitas este mismo o con un numero mas alto.

Primero entra en Info de producto y checa alla el Version del Software. Termine con _PR_420??? Si no con que numero termina?

O ontenta el software que aspergerguy meniona que es 480 intenta el mas abajo para tener opciones en el futuro. Lo mejor sera un N9 todavia con el Software v30 por que del v30 al v40 podrias instalar el software PR001

Escriba como vas y logras de reinstalar
 
tehbeto is offline tehbeto
2015-06-02 , 14:50
Posts: 8 | Thanked: 0 times | Joined on May 2015 @ México
#7
Originally Posted by chilango View Post
aspergerguy tiene razon, parece que no tienes el SW de Telcel or alguien instaló un software mas reciente.
Lo que cuenta es el numero atras.
DFL61_HARMATTAN_40.2012.21-3.420.4_PR_LEGACY_420_ARM_RM-696_PRD_signed.bin

Aqui de Telcel es el 420, lo que necesitas es un Software igual o arriba de 420. Si alguien installo un software mas arriba necesitas este mismo o con un numero mas alto.

Primero entra en Info de producto y checa alla el Version del Software. Termine con _PR_420??? Si no con que numero termina?

O ontenta el software que aspergerguy meniona que es 480 intenta el mas abajo para tener opciones en el futuro. Lo mejor sera un N9 todavia con el Software v30 por que del v30 al v40 podrias instalar el software PR001

Escriba como vas y logras de reinstalar
Hola chilango, este es el software que me marca el Flasher: DFL61_HARMATTAN_40.2012.21-3.265.6_PR_265, ya intenté con el que me recomendo aspergerguy, pero tampoco se puede, ni con flasher ni con phoenix, la versión del software creo que si es Telcel, tenía los wallpapers de la compañia, y tomaba el chip normalmente, no se que pueda ser, Saludos
 
chilango is offline chilango
2015-06-02 , 15:38
Posts: 509 | Thanked: 626 times | Joined on Jul 2012 @ Mexico/Germany
#8
hmm. con que sistema quieres flashear? Con windows o Linux?
porfa anota la orden que tecleas para arrancar el proceso flash.

Tengo muchas dudas de 265, no lo creo. De donde sacaste el N9? Porfa saca el SIM y escribe el numero que encuentres en el Cajoncito del chip
 
tehbeto is offline tehbeto
2015-06-02 , 16:42
Posts: 8 | Thanked: 0 times | Joined on May 2015 @ México
#9
Originally Posted by chilango View Post
hmm. con que sistema quieres flashear? Con windows o Linux?
porfa anota la orden que tecleas para arrancar el proceso flash.

Tengo muchas dudas de 265, no lo creo. De donde sacaste el N9? Porfa saca el SIM y escribe el numero que encuentres en el Cajoncito del chip
hola chilango, con windows, los comandos que ocupo son: flasher -f -F img.bin -F emmc.bin, el código que trae es 059L449, ya he intentado flashear con ese, pero tampoco me deja
 
setter's Avatar
setter is offline setter
2015-06-02 , 16:59
Posts: 376 | Thanked: 257 times | Joined on Dec 2012 @ Sweden
#10
Is every language allowed at TMO?
__________________
R.I.P. Symbian-Freak.....
 

The Following User Says Thank You to setter For This Useful Post:
Reply
Page 1 of 3 1 23

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 19:37.

Contact Us - Home - Archive - Top