![]() |
N900 Camera Front and Back with mplayer
First of all everyone knows the N900's current firmware's front camera is poor at best.
The mirror application is poor on resources. Here is an alternative. Install mplayer form one of the repositories. I do not think it is officially supported, so WARNING and know what your doing, blah blah blah disclaimer. After mplayer is installed, open up x terminal For the front camera use the command Code:
mplayer tv:// -tv driver=v4l2:device=/dev/video1 -vf mirror Code:
mplayer tv:// -tv driver=v4l2:device=/dev/video0 You should be able to use mencoder to record without the amber led once it shows up in your repos. |
Re: N900 Camera Front and Back with mplayer
Thanks, useful info.
|
Re: N900 Camera Front and Back with mplayer
when I use this command it display "mplayer: not found"
|
Re: N900 Camera Front and Back with mplayer
Quote:
|
Re: N900 Camera Front and Back with mplayer
"No such driver: v412"
is the error message I got, I'm probably doing something wrong though |
Re: N900 Camera Front and Back with mplayer
Quote:
braincreation: Thanks for the mplayer command lines, but: Quote:
Quote:
|
Re: N900 Camera Front and Back with mplayer
Ah, silly me. Filthy stinking success after I put the L in there. Though.. the image quality is just as bad as the mirror application (and this time its stretched).
|
Re: N900 Camera Front and Back with mplayer
Quote:
|
Re: N900 Camera Front and Back with mplayer
Can't the in-built GStreamer do all this without the need for another 20 MB install?
|
Re: N900 Camera Front and Back with mplayer
Thank u for ur post it was very useful.
i have activated the front camera but the clarity of the front camera was too bad. And how can i take photos with the front camera. Is there any option for making video call using the front camera. |
All times are GMT. The time now is 16:42. |
vBulletin® Version 3.8.8