View Single Post
Posts: 915 | Thanked: 57 times | Joined on Jun 2011
#10
Originally Posted by dr_frost_dk View Post
Just to state the obvious, the Stock ORIGINAL battery is 1320mAh, the super SCUD battery is 1420mAh@1510mAh.
I would suggest that you charge it externally and if it still only goes to 86% then get another battery cause it might be the protective circuit in the battery that bad because of fake/crappy quality battery.

When you have your battery "fully" charged, then post the value here of "lshal | grep battery.voltage.current"
my new battery stops charging after 86 percent and shows full.what shud i do.this is my new battery information after it sed fully charged.at 83 percent after i browsed for 10mins



BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ lshal|grep bat
battery.charge_level.capacity_state = 'full' (string)
battery.charge_level.current = 8 (0x8) (int)
battery.charge_level.design = 8 (0x8) (int)
battery.charge_level.last_full = 8 (0x8) (int)
battery.charge_level.percentage = 83 (0x53) (int)
battery.charge_level.unit = 'bars' (string)
battery.is_rechargeable = true (bool)
battery.present = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.rechargeable.is_discharging = true (bool)
battery.remaining_time = 10800 (0x2a30) (int)
battery.remaining_time.calculate_per_time = false (bool)
battery.reporting.current = 1187 (0x4a3) (int)
battery.reporting.design = 1424 (0x590) (int)
battery.reporting.last_full = 1214 (0x4be) (int)
battery.reporting.unit = 'mAh' (string)
battery.type = 'pda' (string)
battery.voltage.current = 4088 (0xff8) (int)
battery.voltage.design = 4200 (0x1068) (int)
battery.voltage.unit = 'mV' (string)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_bq27200_0'
battery.charge_level.current = 1670 (0x686) (int)
battery.charge_level.design = 2056 (0x808) (int)
battery.charge_level.last_full = 1724 (0x6bc) (int)
battery.charge_level.percentage = 97 (0x61) (int)
battery.charge_level.rate = 406 (0x196) (int)
battery.is_rechargeable = true (bool)
battery.present = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.rechargeable.is_discharging = true (bool)
battery.remaining_time = 11040 (0x2b20) (int)
battery.reporting.current = 1670 (0x686) (int)
battery.reporting.design = 2056 (0x808) (int)
battery.reporting.last_full = 1724 (0x6bc) (int)
battery.reporting.rate = 406 (0x196) (int)
battery.reporting.technology = 'Li-ion' (string)
battery.reporting.unit = 'mAh' (string)
battery.technology = 'lithium-ion' (string)
battery.type = 'primary' (string)
battery.voltage.current = 4054 (0xfd6) (int)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_bq27200_0' (string)
~ $