I tired this exact thing, now when I boot I get a yellow triangle with an exclamation point. The message reads:

WARNING! You have modified the device software, making the warranty permanently void. The safety/security features of the device may also be disabled or non-operational. Any continued use of the device may harm you and/or the device and will be at your own risk, and you agree not to hold Nokia, its affiliates, customers, or contractors liable for any failures of the device. If you do not accept these risks, you are advised to switch off the device and reinstall a Nokia authorized operating system.

It does not allow me to boot past this warining even after many attempts. I've even used the suppress warranty warning option durining a reflash.

This is what happend with my most recent reflash:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Thom\Desktop\TempNokia\Flasher>flasher -FDFL61_HARMATTAN_20.2011.40-4_P
R_LEGACY_001-OEM1-958_ARM.bin -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1601
NOLO version 2.1.5
Version of 'sw-release': DFL61_HARMATTAN_10.2011.34-1.262.1_PR_262
Sending ape-algo image (7032 kB)...
100% (7032 of 7032 kB, avg. 7728 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.6.3
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_20.2011.40-4_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 72 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [init 0 % 1024 / 6050 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 93 / 93 kB NA ]
[x] kernel [finished 100 % 2712 / 2712 kB 1271 kB/s]
[_] rootfs [init 0 % 12288 / 1102340 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3317 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 93 / 93 kB NA ]
[x] kernel [finished 100 % 2712 / 2712 kB 1271 kB/s]
[f] rootfs [init 0 % 13312 / 1102340 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: Could not find device path under /sys/class/mmc_host/mmc0
mmc: Failed to init mmc block device
scconf_parse_entries failed: (null)
Unable to parse layout
mmc: Could not remove mount directory /tmp/sudmmc9J3FtB/mnt: No such file or dir
ectory
mmc: Could not unlink (null): Bad address
[Pipe 3] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Users\Thom\Desktop\TempNokia\Flasher>





Any ideas or help will be GREATLY appreciated