Thread: I need answer
View Single Post
pantera1989's Avatar
pantera1989 is offline pantera1989
2010-08-09 , 20:52
Posts: 577 | Thanked: 699 times | Joined on Feb 2010 @ Malta
#11
Originally Posted by gerbick View Post
Quick answer is no. Long answer is also no.

But the tinkerer with a full-blown ability to create his own plastic molding and/or ability to convince somebody to do that for you... then yes. Hope you enjoy that one off mutt that might not work after you've taken the N810 and N900 apart and neither work again.

Could be epic. Either an epic fail or epic win. Let's see which way you go with this.
Come on Gerbick..don't encourage him. You know it's doomed to fail.

First off the N900 is 59.8 mm in height, The N810 is 72 mm. So the screen is at least 65 mm in height. Even if you mold plastic, the N900 won't be uniform. The top part will stick out..which is an ugly sight.

If and only if you still are willing to do this, then check if the ribbon cable fits after all. Because then you have a whole new problem, one not easily solvable, and possibly not solvable. Just take the N810 screen, remove the N900's screen, plug in the N810 screen, switch on the N900, and see if it works. Then you can try molding plastic.

But it will be ugly, not practical and most of all (in my opinion) stupid, due to the increased height. Not to mention the screws might not be in the right position..you'd have to redesign the whole top part.

Edit...Replaced cm with mm..sorry lol
__________________
ford
Last edited by pantera1989; 2010-08-10 at 06:16.
 

The Following User Says Thank You to pantera1989 For This Useful Post: