Hi, Im having problems trying to flash the eMMc Im getting the next error

C:\Archivos de programa\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.201
0.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14

Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
SU_PREPARE_DATA_BLOCK_REQ terminated with error code 3.

Is there anything I can do?

I have the same problem here...

someone help us please

I flashed the FIASCO Image and the device booted up, but the emmc cannot be read .

and I tried to put an external memory card and it cannot be read too.

my device is not under warranty...

I gave it to a repair shop and they couldn't do anything.

make sure battery is charged (e.g use external charger), flash combined image, then emmc image and again combined. and use linux machine for flashing, not windows/mac.

see if you have apps partition, if so ,,install backmenu and partition fron gparted