Active Topics
-
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 12 hrs, 49 mins ago -
TLS 1.2 for N9 is ready (28)
to MeeGo / Harmattan by smartblu9 - 14 hrs, 3 mins ago -
Maemo repository (3)
to Community by torsen - 1 day, 5 hrs ago -
Error after installing Leste on sdcard (11)
to Maemo 7 / Leste by Maemish - 2 days, 3 hrs ago -
Introducing ubiboot N9 (multiboot OS loader) (1,393)
to Alternatives by smatkovi - 3 days, 9 hrs ago - more...
|
2010-01-14
, 18:35
|
|
Posts: 472 |
Thanked: 442 times |
Joined on Sep 2007
|
#2
|
Originally Posted by ded
I've just download the update. After the download had completed my N900 rebooted and I get this message :
Code:
Installing software update.
Please do not interrupt.
After 1min it reboots again, and I get the same screen again.
I can't connect to my pc to back it up (windows 7 32bit).
Can someone help?
*http://talk.maemo.org/showpost.php?p...&postcount=140
Did you not read my response to this in the other thread?
__________________
If you don't know how to check your N900's uptime, you probably shouldn't own it.
If you don't know how to check your N900's uptime, you probably shouldn't own it.
|
|
2010-01-14
, 18:37
|
|
Posts: 12 |
Thanked: 0 times |
Joined on Jan 2010
|
#3
|
Yeap, but I wanted to hear the opinion and suggestions from other ppl too. If this is bad delete the post, or report it.
|
|
2010-01-14
, 18:39
|
|
Posts: 472 |
Thanked: 442 times |
Joined on Sep 2007
|
#4
|
What other suggestions are you looking for? Currently you have a linear problem with only one solution. That is making it stop rebooting over and over.
There is only one solution to that. Remove the battery. Don't turn it back on. The N900 behaves differently if you boot it up while attached to a USB cable then it does without it.
So take the battery out. Put it back in. Leave it off. Attach it to your PC via USB, then power it on again. Also the firmware updating software works in the same method.
There is only one solution to that. Remove the battery. Don't turn it back on. The N900 behaves differently if you boot it up while attached to a USB cable then it does without it.
So take the battery out. Put it back in. Leave it off. Attach it to your PC via USB, then power it on again. Also the firmware updating software works in the same method.
__________________
If you don't know how to check your N900's uptime, you probably shouldn't own it.
If you don't know how to check your N900's uptime, you probably shouldn't own it.
|
|
2010-01-14
, 18:42
|
|
Posts: 12 |
Thanked: 0 times |
Joined on Jan 2010
|
#5
|
Originally Posted by Laughingstok
I plugged the battery out. Plugged it back in. Plugged USB cable. Then it automatically switched on and did the same.
What other suggestions are you looking for? Currently you have a linear problem with only one solution. That is making it stop rebooting over and over.
There is only one solution to that. Remove the battery. Don't turn it back on. The N900 behaves differently if you boot it up while attached to a USB cable then it does without it.
So take the battery out. Put it back in. Leave it off. Attach it to your PC via USB, then power it on again. Also the firmware updating software works in the same method.
Code:
Installing software update. Please do not interrupt.
|
|
2010-01-14
, 18:45
|
|
Posts: 472 |
Thanked: 442 times |
Joined on Sep 2007
|
#6
|
So it turns itself on after you put the battery back in?
Is the hardware button on top jammed somehow? That shouldn't happen.
Is the hardware button on top jammed somehow? That shouldn't happen.
__________________
If you don't know how to check your N900's uptime, you probably shouldn't own it.
If you don't know how to check your N900's uptime, you probably shouldn't own it.
|
|
2010-01-14
, 18:47
|
|
Posts: 12 |
Thanked: 0 times |
Joined on Jan 2010
|
#7
|
Nope, it works good. When I attach the USB cable it automatically turns on.
Now, I've pulled the battery off. Plugged the USB cable, and it didn't turned on by itself.
Now, I've pulled the battery off. Plugged the USB cable, and it didn't turned on by itself.
|
|
2010-01-19
, 22:29
|
|
Posts: 1 |
Thanked: 0 times |
Joined on Jan 2010
|
#8
|
I have the same problem...there's a solution??? 
|
|
2010-01-19
, 23:11
|
|
Posts: 7 |
Thanked: 0 times |
Joined on Dec 2009
@ Pakistan
|
#9
|
after the update i still cant use # commands
help plz.
help plz.
|
|
2010-01-19
, 23:49
|
|
Posts: 7 |
Thanked: 0 times |
Joined on Dec 2009
@ Pakistan
|
#10
|
i meant USSD commands like *100# to check balance on prepay connection.
Code:
Installing software update.
Please do not interrupt.
After 1min it reboots again, and I get the same screen again.
I can't connect to my pc to back it up (windows 7 32bit).
Can someone help?
*http://talk.maemo.org/showpost.php?p...&postcount=140