Active Topics
-
Maemo repository (8)
to Community by Maemish - 9 hrs, 12 mins ago -
Porting apps to Leste (44)
to Maemo 7 / Leste by norayr - 13 hrs, 45 mins ago -
List of well performing apps on Leste (35)
to Maemo 7 / Leste by smatkovi - 3 days, 11 hrs ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (13)
to SailfishOS by edp17 - 4 days, 9 hrs ago -
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (79)
to SailfishOS by edp17 - 4 days, 9 hrs ago -
U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (843)
to Alternatives by Arno_11 - 4 days, 14 hrs ago - more...
 |
|
2011-04-20
, 08:07
|
|
Posts: 279 |
Thanked: 231 times |
Joined on Apr 2010
@ Holland
|
#2
|
Same problem here, have tried different settings but to no avail, really. (like wpa2 mode only). When the connection is also used for streaming video on a laptop, it becomes much worse whilse the network is of good quality and speed. Have set it to 100 mw already, I am somewhat convinced that helped a bit.
I am on the laterst PR1.3, power kernel 42, community SSU.
I am on the laterst PR1.3, power kernel 42, community SSU.
__________________
Is that a N900 in your pants or are you just happy to see me?
Is that a N900 in your pants or are you just happy to see me?
 |
|
2011-04-20
, 10:21
|
|
Posts: 356 |
Thanked: 217 times |
Joined on Aug 2010
@ Netherlands
|
#3
|
You might want to look what the kernel-messages say after losing your connection. (with the "dmesg"-command).
I have had that problem with my wireless network too, but it seemed to be a problem caused by the router: after upgrading to a new firmware (in the router..) the connection seemed to remain stable. Maybe that could help you too.
I have had that problem with my wireless network too, but it seemed to be a problem caused by the router: after upgrading to a new firmware (in the router..) the connection seemed to remain stable. Maybe that could help you too.
|
|
2011-04-20
, 11:29
|
|
Posts: 356 |
Thanked: 217 times |
Joined on Aug 2010
@ Netherlands
|
#4
|
You what now? 
Did it work for you?
Did it work for you?
|
|
2011-04-20
, 18:06
|
|
Posts: 53 |
Thanked: 2 times |
Joined on Apr 2011
|
#5
|
sorry for the post up. My friend got my phone and made me joke. but, coming back to topic i cant update firmware everywhere i go. however on my linux computer i dont get connection losts
|
|
2011-04-20
, 20:11
|
|
Posts: 279 |
Thanked: 231 times |
Joined on Apr 2010
@ Holland
|
#6
|
Originally Posted by XiliX
You might want to look what the kernel-messages say after losing your connection. (with the "dmesg"-command).
I have had that problem with my wireless network too, but it seemed to be a problem caused by the router: after upgrading to a new firmware (in the router..) the connection seemed to remain stable. Maybe that could help you too.
Code:
[ 7.757141] omap_ssi omap_ssi: SSI Hardware REVISION 1.0 [ 7.920013] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock [ 7.982025] phy0: Selected rate control algorithm 'minstrel' [ 8.083435] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock [ 8.145477] CMT speech driver v0.2.0 [ 8.309020] wl1251: loaded [ 8.309814] wl1251: initialized [ 8.345550] NET: Registered protocol family 35 [ 8.364288] mmc0: host does not support reading read-only switch. assuming write-enable. [ 8.364379] mmc0: new high speed SDHC card at address d555 [ 8.377471] mmcblk1: mmc0:d555 SU08G 7.60 GiB [ 8.377777] mmcblk1: p1 p2 [ 8.422454] SSI McSAAB PROTOCOL Version: 2.0-rc1 [ 8.567504] mmc1: new high speed MMC card at address 0001 [ 8.569610] mmcblk0: mmc1:0001 MMC32G 29.8 GiB [ 8.569915] mmcblk0: p1 p2 p3 [ 8.808685] dspbridge_init: 412800 bytes @ 80600000 [ 8.943054] omap-iommu omap-iommu.1: isp registered [ 9.145538] isp_mod: disagrees about version of symbol struct_module [ 9.237182] omap-iommu omap-iommu.1: isp: version 1.1 [ 9.445007] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin [ 9.464843] smia_reglist_import: meta_reglist version 2009-07-27 [ 9.464935] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/1502 ptr d0d332a0 [ 9.464935] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/3003 ptr d0d33228 [ 9.464965] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d33090 [ 9.464996] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d33038 [ 9.482818] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin [ 9.502197] smia_reglist_import: meta_reglist version V4 alma 10.10.10 [ 9.502288] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0d36464 [ 9.502319] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0d36204 [ 9.502319] smia_reglist_import: type 10 w 1728 h 1312 fmt 30314142 ival 100/11792 ptr d0d36884 [ 9.502349] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/13000 ptr d0d367ec [ 9.502380] smia_reglist_import: type 10 w 1296 h 984 fmt 30314142 ival 100/501 ptr d0d3658c [ 9.502380] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0d3629c [ 9.502410] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0d36624 [ 9.502410] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/13584 ptr d0d36754 [ 9.502441] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0d36334 [ 9.502471] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0d364f4 [ 9.502471] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/14779 ptr d0d366bc [ 9.502502] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0d363cc [ 9.502502] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0d3605c [ 10.175170] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007 [ 10.175231] g_file_storage gadget: Number of LUNs=2 Number of buffers=16 [ 10.175292] musb_hdrc musb_hdrc: MUSB HDRC host driver [ 10.179351] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 [ 10.181549] usb usb1: configuration #1 chosen from 1 choice [ 10.182952] hub 1-0:1.0: USB hub found [ 10.183105] hub 1-0:1.0: 1 port detected [ 12.596496] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k [ 12.787384] kjournald starting. Commit interval 1 seconds [ 12.799987] EXT3 FS on mmcblk0p2, internal journal [ 12.800048] EXT3-fs: mounted filesystem with writeback data mode. [ 12.839843] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 18.703948] McSAAB: ACWAKE DOWN [ 18.703979] McSAAB: ACWAKE UP [ 18.704040] McSAAB: WAKELINES TEST OK [ 19.001892] Bluetooth: L2CAP ver 2.13 [ 19.001922] Bluetooth: L2CAP socket layer initialized [ 19.143341] Bluetooth: SCO (Voice Link) ver 0.6 [ 19.143371] Bluetooth: SCO socket layer initialized [ 19.170013] hci_h4p hci_h4p: firmware: requesting bcmfw.bin [ 19.658020] Bluetooth: RFCOMM socket layer initialized [ 19.658081] Bluetooth: RFCOMM TTY layer initialized [ 19.658111] Bluetooth: RFCOMM ver 1.11 [ 23.426971] misc iphb: Module registered in 2.6.28.10power42, built Nov 10 2010 01:03:03 [ 49.726989] cfg80211: Regulatory domain changed to country: EU [ 49.727020] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 49.727020] (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 49.727050] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 49.727050] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 49.727081] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 49.727081] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 49.727111] (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 50.708343] wl12xx spi4.0: firmware: requesting wl1251-fw.bin [ 52.809722] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780 [ 52.825317] wl1251: firmware booted (Rev 4.0.4.3.7) [ 54.622314] wl1251: down [ 57.642852] SCSI subsystem initialized [ 58.144561] Driver 'sd' needs updating - please use bus_type methods [ 58.262786] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780 [ 58.278442] wl1251: firmware booted (Rev 4.0.4.3.7) [ 59.192657] wlan0: authenticate with AP 00:16:b6:3e:6e:7f [ 59.195434] wlan0: authenticated [ 59.195434] wlan0: associate with AP 00:16:b6:3e:6e:7f [ 59.198913] wlan0: RX AssocResp from 00:16:b6:3e:6e:7f (capab=0x411 status=0 aid=4) [ 59.198944] wlan0: associated [ 70.536102] kb_lock (GPIO 113) is now closed [ 70.801788] kb_lock (GPIO 113) is now open [ 78.864898] wlan0: roaming signal from driver, sending LOWSIGNAL [ 81.001129] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 87.042633] wlan0: roaming signal from driver, sending LOWSIGNAL [ 88.066619] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 89.602966] wlan0: roaming signal from driver, sending LOWSIGNAL [ 90.204895] NET: Registered protocol family 10 [ 90.205902] lo: Disabled Privacy Extensions [ 90.627716] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 91.753234] wlan0: roaming signal from driver, sending LOWSIGNAL [ 96.156707] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 100.590728] wlan0: no IPv6 routers present [ 101.891326] wlan0: roaming signal from driver, sending LOWSIGNAL [ 103.631011] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 104.656005] wlan0: roaming signal from driver, sending LOWSIGNAL [ 109.878387] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 120.527740] wlan0: roaming signal from driver, sending LOWSIGNAL [ 131.485382] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 365.885284] wlan0: roaming signal from driver, sending LOWSIGNAL [ 372.962066] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4035.701293] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4043.893035] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4053.610717] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4058.832153] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4069.596954] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4078.199188] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4106.870910] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4114.131744] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4654.406036] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4659.322631] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4690.964904] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4697.211456] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4958.850524] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4968.271789] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 4978.819091] wlan0: roaming signal from driver, sending LOWSIGNAL [ 4984.052398] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 5035.223876] kb_lock (GPIO 113) is now closed [ 5035.458038] kb_lock (GPIO 113) is now open [ 5047.837707] wlan0: roaming signal from driver, sending LOWSIGNAL [ 5051.161071] cam_focus (GPIO 68) is now active [ 5051.301727] cam_focus (GPIO 68) is now inactive [ 5052.365203] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 5128.669128] kb_lock (GPIO 113) is now closed [ 5128.895568] kb_lock (GPIO 113) is now open [ 5130.598693] cam_focus (GPIO 68) is now active [ 5130.676757] cam_focus (GPIO 68) is now inactive [ 5150.077056] wlan0: deauthenticating by local choice (reason=3) [ 5150.302032] wl1251: down [ 5153.856597] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780 [ 5153.872253] wl1251: firmware booted (Rev 4.0.4.3.7) [ 5153.990020] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5155.302154] wlan0: authenticate with AP 00:16:b6:3e:6e:7f [ 5155.305603] wlan0: authenticated [ 5155.305603] wlan0: associate with AP 00:16:b6:3e:6e:7f [ 5155.308563] wlan0: RX AssocResp from 00:16:b6:3e:6e:7f (capab=0x411 status=0 aid=4) [ 5155.308593] wlan0: associated [ 5155.356903] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5157.306182] wlan0: roaming signal from driver, sending LOWSIGNAL [ 5158.329742] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 5158.426788] slide (GPIO 71) is now open [ 5165.567291] wlan0: no IPv6 routers present [ 5301.422210] twl4030_keypad twl4030_keypad: Spurious key event 4-2 [ 5301.611724] twl4030_keypad twl4030_keypad: Spurious key event 4-2 [ 5382.795928] wlan0: roaming signal from driver, sending LOWSIGNAL [ 5385.663513] wlan0: roaming signal from driver, sending HIGHSIGNAL [ 5446.176879] cam_focus (GPIO 68) is now active [ 5446.309539] cam_focus (GPIO 68) is now inactive [ 5471.803741] twl4030_keypad twl4030_keypad: Spurious key event 4-2 [ 5472.002136] twl4030_keypad twl4030_keypad: Spurious key event 4-2 [ 5474.692443] cam_focus (GPIO 68) is now active [ 5474.848663] cam_focus (GPIO 68) is now inactive
__________________
Is that a N900 in your pants or are you just happy to see me?
Is that a N900 in your pants or are you just happy to see me?
|
|
2011-04-22
, 10:18
|
|
Posts: 356 |
Thanked: 217 times |
Joined on Aug 2010
@ Netherlands
|
#7
|
Kernel messages are the output of the kernel. That means that if anything (strange) happens you see in in there. i.e. when you insert a usb device, you can check if it works in the k.m.
I have found a similar case on google:
link
Looks like he found a reason for it.
I have found a similar case on google:
link
Looks like he found a reason for it.
Linux Nokia-N900 2.6.28-omap1 #1 PREEMPT Fri Aug 6 11:50:00 EEST 2010 armv7l unknown
Last edited by oneat; 2011-04-20 at 07:55.