Reply
Thread Tools
ffwill is offline ffwill
2011-09-29 , 17:15
Posts: 4 | Thanked: 0 times | Joined on Feb 2010
#1
Hello,

My N900 make stang stuff(reboot, sim card disconnection,...) since few days so I decide to flash it, the simple flash doesn't solve so I decide to make a vanilla flash. But it's failled.

I try on windows, it's failled:
Code:
    C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f
    flasher v2.5.2 (Sep 24 2009)

    Image 'mmc', size 255947 kB
            Version RX-51_2009SE_10.2010.13-2.VANILLA
    USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
    105.
    Found device RX-51, hardware revision 2101
    NOLO version 1.4.13
    Version of 'sw-release': RX-51_2009SE_1.2009.42-11_PR_MR0
    Booting device into flash mode.
    Suitable USB device not found, waiting.
    USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x01c8.
    Raw data transfer EP found at EP2.
    Raw data transfer failed: m. 255947 kB  8192 kB/s]
And on Linux, but the programme is completly blocked at init step 20%
Code:
$ sudo flasher-3.5 -F ./Téléchargements/RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM\(2\).bin -f
    flasher v2.5.2 (Oct 21 2009)

    Image 'mmc', size 255947 kB
       Version RX-51_2009SE_10.2010.13-2.VANILLA
    USB device found found at bus 002, device address 013.
    Found device RX-51, hardware revision 2101
    NOLO version 1.4.14
    Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
    Booting device into flash mode.
    Suitable USB device not found, waiting.
    USB device found found at bus 002, device address 014.
    Raw data transfer EP found at EP2.
    [init        20 %   32768 /  255947 kB     0 kB/s]
I retry many time, it bloked alwais at this point...
I download a new time the vanilla binary file... alwais the same result...

If you have any idea to help me
Thank you!
 
ffwill is offline ffwill
2011-09-30 , 20:52
Posts: 4 | Thanked: 0 times | Joined on Feb 2010
#2
Nobody ? I really would like to try to repare it...
Last edited by ffwill; 2011-09-30 at 21:20.
 
tuxsavvy is offline tuxsavvy
2011-09-30 , 20:57
Posts: 502 | Thanked: 366 times | Joined on Jun 2010 @ /dev/null
#3
I don't know about the windows side but from the linux side when you flashed your device and it was stuck at that point, what did you have on your N900 screen?

I think I may have encountered a similar case whereby the device freezes at the loading dots. Though upon booting normally (without flashing) I was able to use the device normally.
__________________
 
ffwill is offline ffwill
2011-09-30 , 21:18
Posts: 4 | Thanked: 0 times | Joined on Feb 2010
#4
When the N900 is blocked, the loading dot animmation is still working during 5-10 seconds, then after stop.

I try to restart the N900 after this, but i have an infinit dot animmation, and the device never finished to boot.

Is there a way to see detailed boot steps on N900?
To know what is the faillure... like when we have with the <ESC> on ubuntu linux boot.
 
tuxsavvy is offline tuxsavvy
2011-10-01 , 00:56
Posts: 502 | Thanked: 366 times | Joined on Jun 2010 @ /dev/null
#5
By detailed boot steps you're referring to framebuffer console which is a kernel module and is not provided by nokia themselves neither I think was it ever made available by default.

I'd try reflashing PR1.3 and booting the device normally to see if you can get into the device.
__________________
 
ffwill is offline ffwill
2011-10-01 , 13:26
Posts: 4 | Thanked: 0 times | Joined on Feb 2010
#6
I already try to reflash with PR1.3.. I think I test all flashing conbinaison then restart... but it dosn't help.

I'm affraid eMMC flash is broken. But I don't have any way to be sure about this...

So I guess I will have to go in Nokia care next week

Thanks for your help!
 
tuxsavvy is offline tuxsavvy
2011-10-01 , 19:25
Posts: 502 | Thanked: 366 times | Joined on Jun 2010 @ /dev/null
#7
You could do md5sum on the eMMC flash image to see if it matches with the website.

Also its not a good idea to drop your device at Nokia Care, you do realise that there is a chance you won't be seeing your N900 again if you gave it to Nokia Care. In place of your N900 they'll probably offer you N8 or E7 as an `equivalent' replacement for your device that cannot be fixed.
__________________
 
anonymous is offline anonymous
2011-10-01 , 20:41
Posts: 86 | Thanked: 164 times | Joined on Oct 2010
#8
is the usb connection actually dropping? loose cable at either end? is the usb icon still up on the device?

Is there another usb device causing a hiccup? I know I have a usb mouse that polls my usb like crazy. I switched to a ps2 mouse for flashing. Try disconnecting all other usb devices.

Just keep trying. I had never flashed before this week and probably tried at least 30 times over the past 48 hours, but my device works now. I know how frustrating it is. I almost decided to just preorder a N9 at one point. I saw bare minimum installs (no OS) and reboot loops, successful flashes that actually were not... but I never encountered your error.

There has to be something to it. Don't give up.
 
SNOFRI is offline SNOFRI
2011-11-22 , 23:34
Posts: 2 | Thanked: 1 time | Joined on Nov 2010
#9
Hi today i had the same problem like you - flash eMMC stop on 20%. what help me was write in this topic http://talk.maemo.org/showthread.php?t=66004&page=3

post from J4ZZ (thank you J4ZZ) what i do: 1)flash PR1,3 than 2)flash PR1,2 than 3)try flash eMMC it still stoped on 20% but i can boot to maemo now. I use win7.

Next problem was with site when i booted to maemo i can´t join to mobile site(operator) so i try update maemo to pr1.3 by wifi it doesn´t help so i did again flash to pr 1,2 and everything is ok now. Everythings work like on the new phone.
Try it - it helped me, maybe it will help to you too. Good luck.
P.S. srry for bad english
 
pusak gaoq's Avatar
pusak gaoq is offline pusak gaoq
2011-11-23 , 06:06
Posts: 723 | Thanked: 519 times | Joined on Nov 2010 @ Kuching:Malaysia
#10
i got a dangerous method for flashing broken eMMC of your device...i have tested this method on my 2nd device which got the same problem while flashing eMMC....

before you try my method i suggest you use Gparted live CD to fix your eMMC...if it works then you can skip my method....

now if Gparted live CD didn't works then try to reboot your device...if it boot like normal then play around with the device system files...make your device in reboot loop...once your got in reboot loop then you can easily flash your eMMC first then your fiasco images....

why make your device in reboot loop???
well if you look carefully while you flashing your device eMMC you will notice that the usb icon will disappear right after you start flashing & the five dots will appears(stuck after 2-3 seconds)...this show you that you have fails flashing your eMMC...
now if you make your device in reboot loop then your device won't try to load your eMMC on boot...this is the only way to you can flash your eMMC without any problem....

i have try testing this method several times using windows 7 32bit...it works all the time....

if you managed to flash your eMMC using my method then flash your fiasco images next....after completed flashing boot your device...if it boot normally then install backupmenu....using backupmenu + Gparted live CD to scan & fixed remaining problem on your eMMC....
__________________
My Phone Evolution : Nokia 3650-Nokia 6600-Nokia 6630-Motorola Rizr-Sony P1i-Nokia E63-Nokia X3-Samsung E980-Iphone 2G-Sony W595-Nokia E71-Nokia 5800-Nokia N900-HTC Hero-Xperia Mini Pro
 

The Following User Says Thank You to pusak gaoq For This Useful Post:
Reply

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 19:55.

Contact Us - Home - Archive - Top