Reply
Thread Tools
Posts: 617 | Thanked: 338 times | Joined on Mar 2011
#1
Hello there , I have a problem , if I connect my N900 to wifi network and open WinSCP , everything works fine but if I leave it idle around 2 minutes , the WinSCP acts like disconnected and I have to reconnect the phone to wifi network and reconnect the winscp . How do I fix this ?
 
Posts: 1,425 | Thanked: 983 times | Joined on May 2010 @ Hong Kong
#2
Open WinSCP, check Advanced option, select Connection, under Keepalives, choose any other option than Off.
 
Posts: 958 | Thanked: 483 times | Joined on May 2010
#3
if that doesn't work for you, open xterm, and run a ping session to, say, google's public dns - 8.8.8.8 or 8.8.4.4.
 
Mike Fila's Avatar
Posts: 412 | Thanked: 480 times | Joined on Feb 2011 @ Bronx, NY
#4
I have this problem if the screen shuts off on the N900, winscp loses its connection if its not being used. I find if I turn the screen on first before going back to winscp it works fine worst case I start micro b or disconnect and reconnect my wifi connection on the phone.
 
Posts: 1,425 | Thanked: 983 times | Joined on May 2010 @ Hong Kong
#5
Originally Posted by Mike Fila View Post
I have this problem if the screen shuts off on the N900, winscp loses its connection if its not being used. I find if I turn the screen on first before going back to winscp it works fine worst case I start micro b or disconnect and reconnect my wifi connection on the phone.
Turn off powersave in WiFi setting.
 

The Following User Says Thank You to 9000 For This Useful Post:
Posts: 617 | Thanked: 338 times | Joined on Mar 2011
#6
@9000 - I don't find any "advanced options" :-S . But anyway , I fixed it by turning off the power saving on my wifi network . Thanks
 
Reply


 
Forum Jump


All times are GMT. The time now is 09:05.