Active Topics
-
Error after installing Leste on sdcard (17)
to Maemo 7 / Leste by Arno_11 - 8 hrs, 23 mins ago -
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 1 day, 13 hrs ago -
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 1 day, 13 hrs ago -
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 3 days, 17 hrs ago - more...
|
2011-08-24
, 14:20
|
|
Posts: 1,680 |
Thanked: 3,685 times |
Joined on Jan 2011
|
#2
|
Originally Posted by blobbyblobby2000
Maybe post some pictures, also DO NOT OVER TIGHTEN THE SCREEN SCREWS!!!! They WILL strip.
So I had to take my N900 screen off as in a bizarre accident I got the metal frame bent but not damaged the phone in any other way.
Anyway I have reassembled it however the screen isnt lying flat. It is up at the front towards the keyboard and closer to the bottom half at the top.
I have tried different tensions on the screws to see if it changes the angle but with little success.
Anyone know the secret to positioning the screen before screwing down to get the best results?
A.
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
|
|
2011-08-30
, 13:03
|
|
Posts: 8 |
Thanked: 1 time |
Joined on Nov 2010
|
#3
|
So I have to thank ctrlbru on it-diy.com
March 4th, 2011 at 9:29 AM
"Just a note on reassembling: when you put the display and keyboard togheter, do it with slide opened, otherwise you won’t see the clip on the top of the keyboard."
The clip, actually it is just a piece of the slide base that protrudes slightly and retains the display level with the keyboard. You have to hold the display at right angles to the base to get the retainer on the slide to slip under the top edge of the keyboard. This makes is more difficult to get the ribbon attached but if you dont do it then like me you end up with the display not sitting level.
A.
March 4th, 2011 at 9:29 AM
"Just a note on reassembling: when you put the display and keyboard togheter, do it with slide opened, otherwise you won’t see the clip on the top of the keyboard."
The clip, actually it is just a piece of the slide base that protrudes slightly and retains the display level with the keyboard. You have to hold the display at right angles to the base to get the retainer on the slide to slip under the top edge of the keyboard. This makes is more difficult to get the ribbon attached but if you dont do it then like me you end up with the display not sitting level.
A.
Anyway I have reassembled it however the screen isnt lying flat. It is up at the front towards the keyboard and closer to the bottom half at the top.
I have tried different tensions on the screws to see if it changes the angle but with little success.
Anyone know the secret to positioning the screen before screwing down to get the best results?
A.