The Grand NITDroid Thread - NITDroid ICS Upgrade! - Page 361 - maemo.org

Active Topics

List of well performing apps on Leste (35)
to Maemo 7 / Leste by smatkovi - 1 day, 6 hrs ago
Porting apps to Leste (43)
to Maemo 7 / Leste by teroyk - 1 day, 12 hrs ago
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (13)
to SailfishOS by edp17 - 2 days, 4 hrs ago
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (79)
to SailfishOS by edp17 - 2 days, 4 hrs ago
U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (843)
to Alternatives by Arno_11 - 2 days, 9 hrs ago
Maemo repository (5)
to Community by dredlok706 - 5 days, 5 hrs ago
Re-commissioning N9 in 2018 (127)
to MeeGo / Harmattan by smatkovi - 5 days, 7 hrs ago
more...

Page 361 of 511

361

Thread Tools

	stryker9	2012-01-01 , 03:14
	Posts: 63 \| Thanked: 8 times \| Joined on Nov 2011 @ Stockholm, SW	#3601

Originally Posted by ibrakalifa

i used auto installer for make multiboot, after that i do manually,

{..}

Thanx man!..i tried that too.. it is JUST not possible to get this system going with backupmenu installed as well. Plus, i always lose out power-kernel_49 when i install NITDroid.

Originally Posted by ibrakalifa

dpkg -i /home/user/MyDocs/ur nitdroid kernel
leafpad /etc/multiboot.d/11*

change ur device item to mmcblk1p2

Naah! I am working with a 2.5GB mmcblk0p5..

p.s. What kernel do YOU use with UMay..?? I am inclined to go for "_07-rc3", what d'ya say..!?

__________________

..
It is always better to have no ideas than false ones; to believe nothing, than to believe what is wrong.
- Thomas Jefferson

My devicevolution: Seimens C2, Nokia 6600, Nokia 3230 (red & then black), Nokia 6630 ME, Nokia N73, Nokia N900

Quote & Reply |

	ibrakalifa	2012-01-01 , 03:22
	Posts: 1,583 \| Thanked: 1,203 times \| Joined on Dec 2011 @ Everywhere	#3602

Originally Posted by stryker9

Thanx man!..i tried that too.. it is JUST not possible to get this system going with backupmenu installed as well. Plus, i always lose out power-kernel_49 when i install NITDroid.

Naah! I am working with a 2.5GB mmcblk0p5..

p.s. What kernel do YOU use with UMay..?? I am inclined to go for "_07-rc3", what d'ya say..!?

are u partioning ur n900?, ur emmc?? is it 8gb or still standart one??

reflash ur n900 to 8gb and 20gb

try my method then

install nitdroid autoinstaller

run it, then after first step tab new in xterm, close ito to the new one do this
root
cd /home/user/MyDocs
bzip2 -d N12_Umay.tar.bz2
cd /home
mkdir /and
cd /
mount /home /and
cd /and
tar xvf /home/user/MyDocs/N12_Umay.tar

dpkg -i /home/user/MyDocs/ur nitdroid kernel
leafpad /etc/multiboot.d/11*
change ur device item to mmcblk1p2

i never failed with this method, and i still used nitdroid kernel final1 06, its better(for me)

p.s http://www.youtube.com/watch?v=TInYpDY8KkI
thats my nitdroid

Last edited by ibrakalifa; 2012-01-01 at 03:31.

Quote & Reply |

The Following 2 Users Say Thank You to ibrakalifa For This Useful Post:
stryker9, The Winter

dingoo	2012-01-01 , 10:11
Posts: 1 \| Thanked: 0 times \| Joined on Jul 2011	#3603

hi people, i have been using nitdroid for a while and when i reflashed last week to have an 8gb partion for optfs i could not install chainfire3d, i actually purchased it beforehand and had working. have tried over 5 reflashes and reinstalls but can never get it to install the driver. reflashing now to 5gb version which i never got this error with, may help other people with problems if they have 8gb partition i would reflash to 5 myself, ill let you all know how it goes.
oh and happy new year, i cant remember if i did an introduction thread but hello again if i did.

can confirm for me the 5gig emmc works fine but not the 8 gig emmc.
worked first time for me anyway, i also didnt do the google backup device option when you first setup google account dont know if it
helped

Last edited by dingoo; 2012-01-01 at 11:20. Reason: it worked

Quote & Reply |

	stryker9	2012-01-01 , 18:57
	Posts: 63 \| Thanked: 8 times \| Joined on Nov 2011 @ Stockholm, SW	#3604

Originally Posted by ibrakalifa

are u partioning ur n900?, ur emmc?? is it 8gb or still standart one??

- It is a 5GB partition with 3.8GB left in rootfs.

Originally Posted by ibrakalifa

reflash ur n900 to 8gb and 20gb

try my method then

- Let me try with the 5GB, please!!

Originally Posted by ibrakalifa

install nitdroid autoinstaller

run it, then after first step tab new in xterm, close ito to the new one do this
root
cd /home/user/MyDocs
bzip2 -d N12_Umay.tar.bz2
cd /home
mkdir /and
cd /
mount /home /and
cd /and
tar xvf /home/user/MyDocs/N12_Umay.tar

dpkg -i /home/user/MyDocs/ur nitdroid kernel
leafpad /etc/multiboot.d/11*
change ur device item to mmcblk1p2

i never failed with this method, and i still used nitdroid kernel final1 06, its better(for me)

p.s http://www.youtube.com/watch?v=TInYpDY8KkI
thats my nitdroid

- On it..!

Will report in a bit.

__________________

..
It is always better to have no ideas than false ones; to believe nothing, than to believe what is wrong.
- Thomas Jefferson

My devicevolution: Seimens C2, Nokia 6600, Nokia 3230 (red & then black), Nokia 6630 ME, Nokia N73, Nokia N900

Quote & Reply |

	ammyt	2012-01-01 , 19:59
	Posts: 1,918 \| Thanked: 3,118 times \| Joined on Oct 2010 @ My pants	#3605

What you should do is as follows:
1. Flash 8GB eMMC and Fiasco
2. Create the new mmcblk0p5 partition >=2GB
3. mkdir /and then mount it on mmcblk0p5
4. Extract N12 Umay to /and
5. apt-get kernel-power-flasher kernel-power-settings multiboot kernel-power-bootimg backupmenu
6. dpkg the nitdroid kernel
7. Install the backupmenu patch by mido.fayad
8. Reboot

__________________
[NITDroid] [My Qtlockscreen Skins] [QBW HTC Sense on Your N900!] [CPU Power Control] [Debian Packaging] [Build Me!]

Youtube Channel - Subscribe!
Retired Dev - Thanks for all the fish!

Quote & Reply |

The Following User Says Thank You to ammyt For This Useful Post:
stryker9

	stryker9	2012-01-01 , 20:15
	Posts: 63 \| Thanked: 8 times \| Joined on Nov 2011 @ Stockholm, SW	#3606

Hey ammyt, a few questions;

a) Why can't i work with 5GB root..?
b) After step 2 and before step 3, i'd like to restore my rootfs & optfs using backupmenu - to be able to get all my settings, apps, etc. That's what i've done everytime after the 5GB flashing routine.
c) You say "Install the backupmenu patch by mido.fayad" - but everytime it ends up breaking the power-kernel AND the nitdroid-kernel. :[

..have you tried this..??

__________________

..
It is always better to have no ideas than false ones; to believe nothing, than to believe what is wrong.
- Thomas Jefferson

My devicevolution: Seimens C2, Nokia 6600, Nokia 3230 (red & then black), Nokia 6630 ME, Nokia N73, Nokia N900

Quote & Reply |

	Virtuality	2012-01-01 , 21:05
	Posts: 101 \| Thanked: 61 times \| Joined on Dec 2011	#3607

Guys I have a problem that I have been trying to solve for several days.

It is about the NITdroid, there go what happens:

1- I did a complete FIASCO and Vanilla reflash for my phone.

2- Then, I installed nitdroid "AUTOINSTALLER"

3- I downloaded nitdroid using the AUTOINSTALLER"

4- Whenever I try to install it the following messages are appearing in the x-terminal : "mmc 1 not found moving to method 2" , echo :not found , sleep 1 : "not found". These, appear after the installation is complete.

5- When I try to boot nitdroid the opperation will stop at a message that says : kernel panic.

6- Then my phone will turn off and won't be able to turn on again unless I do a reflash to my phone.

I have reflashed my phone for more that 7 times and still the same errors occur.

Need help Pals!

Quote & Reply |

	ammyt	2012-01-01 , 21:36
	Posts: 1,918 \| Thanked: 3,118 times \| Joined on Oct 2010 @ My pants	#3608

Originally Posted by stryker9

Hey ammyt, a few questions;

a) Why can't i work with 5GB root..?
b) After step 2 and before step 3, i'd like to restore my rootfs & optfs using backupmenu - to be able to get all my settings, apps, etc. That's what i've done everytime after the 5GB flashing routine.
c) You say "Install the backupmenu patch by mido.fayad" - but everytime it ends up breaking the power-kernel AND the nitdroid-kernel. :[

..have you tried this..??

Well here lies my weakness point. I never used backupmenu before literally never, so I don't know how things work with it. But installing is very logical, 5GB eMMC is okay.
Well, first repartition, then restore, then extract NITDroid, then get KP with multiboot and KP bootimg, then fayad's backupmeu patch.

If that did not work, try to first repartition, then install KP and multiboot with KP bootimg, then backupmenu patch, and then proceed with extracting NITDroid and installing its kernel.

Quote & Reply |

The Following User Says Thank You to ammyt For This Useful Post:
stryker9

	ammyt	2012-01-01 , 21:38
	Posts: 1,918 \| Thanked: 3,118 times \| Joined on Oct 2010 @ My pants	#3609

Originally Posted by Virtuality

Guys I have a problem that I have been trying to solve for several days.

It is about the NITdroid, there go what happens:

1- I did a complete FIASCO and Vanilla reflash for my phone.

2- Then, I installed nitdroid "AUTOINSTALLER"

3- I downloaded nitdroid using the AUTOINSTALLER"

4- Whenever I try to install it the following messages are appearing in the x-terminal : "mmc 1 not found moving to method 2" , echo :not found , sleep 1 : "not found". These, appear after the installation is complete.

5- When I try to boot nitdroid the opperation will stop at a message that says : kernel panic.

6- Then my phone will turn off and won't be able to turn on again unless I do a reflash to my phone.

I have reflashed my phone for more that 7 times and still the same errors occur.

Need help Pals!

w00t! Your errorr indicates that either your busybox package is blown or that you discovered an unprecedented bug in the installer, let me check.

Quote & Reply |

The Following User Says Thank You to ammyt For This Useful Post:
Virtuality

	ammyt	2012-01-01 , 21:50
	Posts: 1,918 \| Thanked: 3,118 times \| Joined on Oct 2010 @ My pants	#3610

You might have seen the GUI installer here:
http://youtu.be/LKbJohg6tk0
After a little thinking, I deduced that staying on the old school command-driven installer would be better. Not because it is difficult or anything, but users shall understand that this is an under-development project.