Active Topics
-
Maemo repository (8)
to Community by Maemish - 21 hrs, 32 mins ago -
Porting apps to Leste (44)
to Maemo 7 / Leste by norayr - 1 day, 2 hrs ago -
List of well performing apps on Leste (35)
to Maemo 7 / Leste by smatkovi - 3 days, 23 hrs ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (13)
to SailfishOS by edp17 - 4 days, 21 hrs ago -
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (79)
to SailfishOS by edp17 - 4 days, 21 hrs ago -
U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (843)
to Alternatives by Arno_11 - 5 days, 2 hrs ago - more...
 |
|
2012-08-26
, 08:22
|
|
Posts: 1,503 |
Thanked: 2,688 times |
Joined on Oct 2010
@ Denmark
|
#2
|
Is it a proper touch screen or one of those cheap crappy ones?, and did you connect the tiny connector between screen and LCD that goes into the flat cable that goes from the LCD to Motherboard?
__________________
N900 @ 850MHz (LV) & 3044mAh Battery
Battery Tests and Battery Mod / Homemade 3000mAh XL Battery - (DONATE)
Custom Brightness & No Light Sensor
N900 DIY Micro Amplifier, turn your N900 into a home stereo
Fix you USB before and after it breaks
Feel free to contact me through PM, Skype or G.Talk
N900 @ 850MHz (LV) & 3044mAh Battery
Battery Tests and Battery Mod / Homemade 3000mAh XL Battery - (DONATE)
Custom Brightness & No Light Sensor
N900 DIY Micro Amplifier, turn your N900 into a home stereo
Fix you USB before and after it breaks
Feel free to contact me through PM, Skype or G.Talk
|
|
2012-08-26
, 08:33
|
|
Posts: 306 |
Thanked: 38 times |
Joined on Dec 2009
@ Austria
|
#3
|
the components are all from nokia! all cables should be connected!
but i suspect a trick with the tiny connector, i tried it many times with different methods without success
but i suspect a trick with the tiny connector, i tried it many times with different methods without success
 |
|
2012-08-26
, 08:34
|
|
Posts: 476 |
Thanked: 438 times |
Joined on Nov 2010
@ Sweden
|
#4
|
i had same problem, water damaged motherboard...
__________________
Email: R.lundgren92@gmail.com
Email: R.lundgren92@gmail.com
|
|
2012-08-26
, 08:37
|
|
Posts: 306 |
Thanked: 38 times |
Joined on Dec 2009
@ Austria
|
#5
|
motherboard is fine! i tested it with a good lcd!
|
|
2012-08-26
, 09:51
|
|
Posts: 306 |
Thanked: 38 times |
Joined on Dec 2009
@ Austria
|
#6
|
what is wrong with these connections??
 |
|
2012-08-26
, 10:33
|
|
Posts: 640 |
Thanked: 435 times |
Joined on Oct 2011
@ rajvoSa BA
|
#7
|
Originally Posted by StocChr
it shouldn't be anything wrong with them, try other digitizer
what is wrong with these connections??
low right edge of digitizer sometimes can be issue because there can be louse wires or something though
__________________
~ # mv /usr/bin/smartsearch /usr/bin/stupidsearch
|
|
2012-08-26
, 10:55
|
|
Posts: 306 |
Thanked: 38 times |
Joined on Dec 2009
@ Austria
|
#8
|
at the pictures you can see TWO different lcd with TWO different digitizer! both screens are new, it must be my fault?!
|
|
2012-08-26
, 11:34
|
|
Posts: 640 |
Thanked: 435 times |
Joined on Oct 2011
@ rajvoSa BA
|
#9
|
Originally Posted by StocChr
see that black plug on white connector? that thing goes up-down. when it's down digitizer cable is locked but when it's up it's unlocked, turn it up and try to plug cable of digitizer little bit more inside, i don't see anything else that could cause any problem...
at the pictures you can see TWO different lcd with TWO different digitizer! both screens are new, it must be my fault?!
__________________
~ # mv /usr/bin/smartsearch /usr/bin/stupidsearch
|
|
2012-08-26
, 13:24
|
|
Posts: 306 |
Thanked: 38 times |
Joined on Dec 2009
@ Austria
|
#10
|
hmm don't know what the problem is, when i measure from the digitizer cable to the connector to the slider, the connection lcd <-> digitizer is fine
is there a special trick to assembly the lcd and the touch digitizer?
i assembled it for many times, but only the lcd screen works but no touch response! the components are all brand new!
i am very depressed
cheers