Active Topics

 


Reply
Thread Tools
Posts: 8 | Thanked: 3 times | Joined on Apr 2015
#1
Hi to all
Hopefully I have put this in the correct forum.

Trying to port sailfish to my nokia n9. Everything worked fine while following various instructions from some very smart people on the web. (Great job you are all doing out there with N9 and sailfish) There is one problem though that I am having and have not been able to find an answer.

When I ported my N9 the first time I installed sailfish version 1.0.2.5 which came in a bz2 file. It started up fine when booting into sailfish. Then after using it for a little while I noticed that it was a very old version so I wanted to update to the latest sailfish version. I managed to find the latest sailfish version 1.1.1.27 bz2 which I extracted to Nokia N9 to replace the older version but sailfish would not load up after booting into it. It come up with a message...."OS kernel not found...boot up in maintenance mode".

Then i noticed that the original sailfish file I used for my porting from various sites, version (1.0.2.5) is only about 330 MB. The latest version I tried installing (1.1.1.27) file is about 2.5 GB.

So I have a couple questions.
Why is the file so different in size?
Is the latest version and the size of the file the reason why sailfish doesn't load up cause there is no room on the N9?
Is the boot process looking for a different startup file with the latest version?
What does the command "mount /dev/mmcblk0p4" mean and does it create a partition at a particular size...maybe too small?

Any help would be greatly appreciated.

Thanks
 

The Following 2 Users Say Thank You to plolic For This Useful Post:
Posts: 165 | Thanked: 625 times | Joined on Oct 2012
#2
2.5 G is too much I think, unless it is the uncompressed size?!
 

The Following User Says Thank You to hedayat For This Useful Post:
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#3
Originally Posted by plolic View Post
Is the boot process looking for a different startup file with the latest version?
AFAIK all prepared SFOS ot Nemo filesystem images have the bootable kernel in /boot/bzImage (which then again is a symlink to the actual kernel in same directory)

You can check if it exists correctly for example by mounting your ALT_OS directory in harmattan and looking there:
~ # mount /dev/mmcblk0p4 /mnt/
~ # ls -la /mnt/boot/
total 9584
drwxr-xr-x 2 root root 4096 Dec 28 2013 .
drwxr-xr-x 21 root root 4096 Dec 28 2013 ..
lrwxrwxrwx 1 root root 33 Jan 1 1970 System.map -> System.map-2.6.32.20130129.1-n950
-rw------- 1 root root 1294961 Nov 21 2013 System.map-2.6.32.20130129.1-n950
lrwxrwxrwx 1 root root 30 Jan 1 1970 bzImage -> vmlinuz-2.6.32.20130129.1-n950
lrwxrwxrwx 1 root root 30 Jan 1 1970 cmdline -> cmdline-2.6.32.20130129.1-n950
-rw-r--r-- 1 root root 54 Nov 21 2013 cmdline-2.6.32.20130129.1-n950
-rw-r--r-- 1 root root 56241 Nov 21 2013 config-2.6.32.20130129.1-n950
-rwxr-xr-x 1 root root 2823888 Nov 21 2013 vmlinuz-2.6.32.20130129.1-n950



Originally Posted by plolic View Post
What does the command "mount /dev/mmcblk0p4" mean and does it create a partition at a particular size...maybe too small?
The mount command does not create any partitions, it just makes a pre-created partition available to you at certain location.
If you have created your ALT_OS partition (mmcblk0p4) using the default splitter script on the Moslo or ubiboot repair console, then the size of the partition is 4GB which is well suitable for SFOS installation.

I rather suspect something went wrong for you when you extracted the FS image to your partition.
 

The Following User Says Thank You to juiceme For This Useful Post:
Posts: 8 | Thanked: 3 times | Joined on Apr 2015
#4
Hi thanks all for input.

Quick rundown on what I did from scratch....again.
Reflashed Nokia N9 - OK
Flashed open mode kernel - OK
Installed Developer Tools - OK
Partitioned N9 - OK
Extracted Ubiboot and flashed - OK
Installed Sailfish (latest vers 1.1.1.27 direct from sailfish 2.9GB)
-cd /home/user/MyDocs/
mkdir /sailfish
mount /dev/mmcblk0p4 /sailfish
tar --numeric-owner -xvjf sailfish.tar.bz2 -C /sailfish/
sync
exit.

When I restart my Nokia N9 I get the following message. (Boot OS/Kernel selection failed! Please run a maintenance boot)

Tried
~ # mount /dev/mmcblk0p4 /mnt/
~ # ls -la /mnt/boot/
....and get 'no such file or directory'

Any ideas please? Cheers
 
peterleinchen's Avatar
Posts: 4,118 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#5
Looks like you forgot to create (or better said: resize/extend) mmcblk0p4.
iirc on a stock/reflashed N9 p4 exists but is zero or very small size. So no wonder you miss almost all files of sailfish.
What about 'ls -al /mnt' or 'sfdisk -l /dev/mmcblk0'?
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature
 

The Following User Says Thank You to peterleinchen For This Useful Post:
Posts: 8 | Thanked: 3 times | Joined on Apr 2015
#6
yes..... ls -al /mnt worked and this is my output.

total 44
drwxr-xr-x 4 root root 4096 Apr27 22:18
drwxrwxr-x 27 root root 4096 Jan1 1970
drwx------ 2 root root 16384 Jan1 1970 lost+found
drwxrwxr-x 600 1000 1000 20480 Apr27 23:11 sailfish-1.1.1.27-oss
 
peterleinchen's Avatar
Posts: 4,118 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#7
So what about
sfdisk -l
?

I am sure your partition 4 is just a few bytes long.
Please check ubiboot thread and wiki how to create/resize that partition (keyword "sfdisk" for manual and "moslo" for automatic).
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature
 

The Following User Says Thank You to peterleinchen For This Useful Post:
Posts: 8 | Thanked: 3 times | Joined on Apr 2015
#8
Tried /sbin/sfdisk -l and got the following.

/dev/mmcblk0p1 16 16051 160496 5135872 FAT32

/dev/mmcblk0p2 288512 419583 131072 4194304 Linux

/dev/mmcblk0p3 419584 485119 65536 2097152 Linux

/dev/mmcblk0p4 160512 288511 128000 4096000 Linux

disk /dev/dm-0: 0 cylinders 0 heads 0 sectors /track
sfdisk error: sector 0 does not have an msdos signature
/dev/dm-0 unrecognised partition table type No partitions found.

Not being an expert in terminal but this looks like the partion p4 is 4GB in size?

Also noticed that the tar.bz2 file that I mentioned previously that is available from various porting sites is actually called a vgrade sailfish version. Would this make a difference to the latest version supplied by sailfish?

Not sure if allowed to put so much data but here is the boot log.

Apr 29 01:34:36 (none) syslog.info syslogd started: BusyBox v1.19.4
Apr 29 01:34:36 (none) user.notice root: Display Text: Waiting for

eMMC device...
Apr 29 01:34:36 (none)
user.notice root: N9 ubiboot ver. 0.3.5
Apr 29 01:34:36 (none)
user.notice root: kernel Linux (none) 2.6.32.54-ubiboot-02-b #3 PREEMPT Wed Oct 30 00:51:46 EET 2013 armv7l GNU/Linux
Apr 29 01:34:36 (none)
user.notice root: Rootfs build info: ROOTFS created by juice@osiris on Wed Oct 30 00:51:29 EET 2013 (svn rev. 65)
Apr 29 01:34:36 (none)
user.notice root: Mounted /dev/mmcblk0p1 on /mnt/1 as VFAT
Apr 29 01:34:37 (none)
user.notice root: Mounted /dev/mmcblk0p2 on /mnt/2 as EXT4
Apr 29 01:34:37 (none)
user.notice root: Mounted /dev/mmcblk0p3 on /mnt/3 as EXT4
Apr 29 01:34:37 (none)
user.notice root: Mounted /dev/mmcblk0p4 on /mnt/4 as EXT4
Apr 29 01:34:37 (none)
user.notice root: Could not mount /dev/mmcblk0p5 on /mnt/5
Apr 29 01:34:37 (none)
user.notice root: Could not mount /dev/mmcblk0p6 on /mnt/6
Apr 29 01:34:37 (none)
user.notice root: Could not mount /dev/mmcblk0p7 on /mnt/7
Apr 29 01:34:37 (none)
user.notice root: Found /mnt/1/boot/ubiboot.conf
Apr 29 01:34:37 (none)
user.notice root: Copied archive /mnt/1/boot/ubiboot-02.035_SF_v1.cpio (md5sum=bd7db93338930a172440be327c00c037)
Apr 29 01:34:37 (none)

user.notice root: Umounting /mnt/1
Apr 29 01:34:37 (none)
user.notice root: Umounting /mnt/2
Apr 29 01:34:37 (none)
user.notice root: Umounting /mnt/3
Apr 29 01:34:37 (none)
user.notice root: Umounting /mnt/4
Apr 29 01:34:37 (none)
user.notice root: Umounting /mnt/5
Apr 29 01:34:37 (none)
user.notice root: Umounting /mnt/6
Apr 29 01:34:37 (none)
user.notice root: Umounting /mnt/7
Apr 29 01:34:37 (none)
user.notice root: Config version is 3
Apr 29 01:34:37 (none)
user.notice root: Archive cpio version is 3
Apr 29 01:34:37 (none)
user.notice root: Archive cpio build info: CPIO packed by juice@osiris on Fri Dec 13 09:06:30 EET 2013 (svn rev. N/A)
Apr 29 01:34:37

(none)
user.notice root: bootreason: pwr_key
Apr 29 01:34:37 (none)
user.notice root: bootmode: normal
Apr 29 01:34:37 (none)
user.notice root: Mounted /dev/mmcblk0p1 on /mnt/1 as VFAT
Apr 29 01:34:37 (none)
user.notice root: Mounted /dev/mmcblk0p2 on /mnt/2 as EXT4
Apr 29 01:34:37 (none)
user.notice root: Mounted /dev/mmcblk0p3 on /mnt/3 as EXT4
Apr 29 01:34:37 (none)
user.notice root: Mounted /dev/mmcblk0p4 on /mnt/4 as EXT4
Apr 29 01:34:37 (none)
user.notice root: Could not mount /dev/mmcblk0p5 on /mnt/5
Apr 29 01:34:37 (none)
user.notice root: Could not mount /dev/mmcblk0p6 on /mnt/6
Apr 29 01:34:37 (none)
user.notice root: Could not mount /dev/mmcblk0p7 on /mnt/7
Apr 29 01:34:39 (none)
user.notice root: Started watchdog kicker
Apr 29 01:34:39 (none)
user.notice root: Starting menu launcher
Apr 29 01:34:39 (none)
user.notice root: Reached end of init!
Apr 29 01:34:39 (none)
user.notice root: Checked that configuration is correct for this CPIO
Apr 29 01:34:39 (none)
user.notice root: Started SailfihOS edition of menuscripts
Apr 29 01:34:39 (none)
user.notice root: Compiled by juiceme 13.11.2013
Apr 29 01:34:39 (none)
user.notice root: Loading animation control file
Apr 29 01:34:39 (none)
user.notice root: touchdevice: /dev/input/event3
Apr 29 01:34:39 (none)
user.notice root: O_COMMAND_LINE: init=/sbin/preinit root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw

mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config
Apr 29 01:34:39

(none)
user.notice root: Started animated OS selection menu
Apr 29 01:34:41 (none)
user.notice root: Selected second level menu for OS4
Apr 29 01:34:41 (none)
user.notice root: Autobooting OS4 with kernel line 1
Apr 29 01:34:41 (none)
user.notice root: Selecting Sailfish OS, running kernel /boot/Sailfish/boot/bzImage
Apr 29 01:34:42 (none)
user.notice root: Appending options to CMDLINE: vram=6m omapfb.vram=0:6M
Apr 29 01:34:42 (none)
user.notice root: Cannot load Sailfish kernel /boot/Sailfish/boot/bzImage
Apr 29 01:34:42 (none)
user.notice root: Boot OS/kernel selection failed
Apr 29 01:34:42 (none)
user.notice root: Saving ubiboot log files
Apr 29 01:34:42 (none)
user.notice root: logfile partition is mounted to /mnt/1

Apr 29 01:35:50 (none) syslog.info syslogd started: BusyBox v1.19.4
Apr 29

01:35:50 (none)
user.notice root: N9 ubiboot ver. 0.3.5
Apr 29 01:35:50 (none)
user.notice root: kernel Linux (none) 2.6.32.54-ubiboot-02-b #3 PREEMPT Wed Oct 30 00:51:46 EET 2013 armv7l GNU/Linux
Apr 29 01:35:50

(none)
user.notice root: Rootfs build info: ROOTFS created by juice@osiris on Wed Oct 30 00:51:29 EET 2013 (svn rev. 65)
Apr 29 01:35:50 (none)

user.notice root: Mounted /dev/mmcblk0p1 on /mnt/1 as VFAT
Apr 29 01:35:51 (none)
user.notice root: Mounted /dev/mmcblk0p2 on /mnt/2 as EXT4
Apr 29 01:35:51 (none)
user.notice root: Mounted /dev/mmcblk0p3 on /mnt/3 as EXT4
Apr 29 01:35:51 (none)
user.notice root: Mounted /dev/mmcblk0p4 on /mnt/4 as EXT4
Apr 29 01:35:51 (none)
user.notice root: Could not mount /dev/mmcblk0p5 on /mnt/5
Apr 29 01:35:51 (none)
user.notice root: Could not mount /dev/mmcblk0p6 on /mnt/6
Apr 29 01:35:51 (none)
user.notice root: Could not mount /dev/mmcblk0p7 on /mnt/7
Apr 29 01:35:51 (none)
user.notice root: Found /mnt/1/boot/ubiboot.conf
Apr 29 01:35:51 (none)
user.notice root: Copied archive /mnt/1/boot/ubiboot-02.035_SF_v1.cpio (md5sum=bd7db93338930a172440be327c00c037)
Apr 29 01:35:51 (none)

user.notice root: Umounting /mnt/1
Apr 29 01:35:51 (none)
user.notice root: Umounting /mnt/2
Apr 29 01:35:51 (none)
user.notice root: Umounting /mnt/3
Apr 29 01:35:51 (none)
user.notice root: Umounting /mnt/4
Apr 29 01:35:51 (none)
user.notice root: Umounting /mnt/5
Apr 29 01:35:51 (none)
user.notice root: Umounting /mnt/6
Apr 29 01:35:51 (none)
user.notice root: Umounting /mnt/7
Apr 29 01:35:51 (none)
user.notice root: Config version is 3
Apr 29 01:35:51 (none)
user.notice root: Archive cpio version is 3
Apr 29 01:35:51 (none)
user.notice root: Archive cpio build info: CPIO packed by juice@osiris on Fri Dec 13 09:06:30 EET 2013 (svn rev. N/A)
Apr 29 01:35:51

(none)
user.notice root: bootreason: pwr_key
Apr 29 01:35:51 (none)
user.notice root: bootmode: normal
Apr 29 01:35:51 (none)
user.notice root: Mounted /dev/mmcblk0p1 on /mnt/1 as VFAT
Apr 29 01:35:51 (none)
user.notice root: Mounted /dev/mmcblk0p2 on /mnt/2 as EXT4
Apr 29 01:35:51 (none)
user.notice root: Mounted /dev/mmcblk0p3 on /mnt/3 as EXT4
Apr 29 01:35:51 (none)
user.notice root: Mounted /dev/mmcblk0p4 on /mnt/4 as EXT4
Apr 29 01:35:52 (none) user.notice root: Could not mount /dev/mmcblk0p5 on

/mnt/5
Apr 29 01:35:52 (none)
user.notice root: Could not mount /dev/mmcblk0p6 on /mnt/6
Apr 29 01:35:52 (none)
user.notice root: Could not mount /dev/mmcblk0p7 on /mnt/7
Apr 29 01:35:53 (none)
user.notice root: Started watchdog kicker
Apr 29 01:35:53 (none)
user.notice root: Starting menu launcher
Apr 29 01:35:53 (none)
user.notice root: Reached end of init!
Apr 29 01:35:53 (none)
user.notice root: Checked that configuration is correct for this CPIO
Apr 29 01:35:53 (none)
user.notice root: Started SailfihOS edition of menuscripts
Apr 29 01:35:53 (none)
user.notice root: Compiled by juiceme 13.11.2013
Apr 29 01:35:53 (none)
user.notice root: Loading animation control file
Apr 29 01:35:53 (none)
user.notice root: touchdevice: /dev/input/event3
Apr 29 01:35:53 (none)
user.notice root: O_COMMAND_LINE: init=/sbin/preinit root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw

mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config
Apr 29 01:35:53

(none) user.notice root: Started animated OS selection menu
Apr 29 01:36:05 (none)
user.notice root: Selecting defaults due to timeout in main menu
Apr 29 01:36:05 (none)
user.notice root: Selecting Harmattan OS, running kernel /boot/Harmattan/boot/zImage_2.6.32.54-openmode_l2fix
Apr 29 01:36:06 (none)

user.notice root: Loading kernel /boot/Harmattan/boot/zImage_2.6.32.54-openmode_l2fix
Apr 29 01:36:06 (none)
user.notice root: kexec_load() successful
Apr 29 01:36:06 (none)
user.notice root: Restarting to selected OS
Apr 29 01:36:07 (none)
user.notice root: Saving ubiboot log files
Apr 29 01:36:07 (none)
user.notice root: logfile partition is mounted to /mnt/1

Cheers
 

The Following User Says Thank You to plolic For This Useful Post:
peterleinchen's Avatar
Posts: 4,118 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#9
Yes, partition is 4G.

But something went wrong during extraction. There is no kernel (bzimage) under '/mnt/boot' as boot directory itself is missing.
What is the content of sailfish-1.1.1.27-oss directory??
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature
 

The Following User Says Thank You to peterleinchen For This Useful Post:
Posts: 8 | Thanked: 3 times | Joined on Apr 2015
#10
Not an expert in terminal but ran this.
cd /sailfish
/sailfish/ # ls -l
Total 0

Is that ok?

Makes me think I have no files.
I have to add that I saw all the files being listed on the terminal screen while they were extracting. Took about 30 minutes or so.

Sorry its a bit long but these are the folders in the oss file-
abi-compliance-checker
acl
alsa-lib
alsa-plugins
alsa-utils
aspell
aspell-en
atruncate
attr
audioresource
audioresource-qt
augeas
autoconf
autoconf213
automake
basesystem
bash
binutils
bison
bluez
bluez-hcidump
boardname
boost
btrfs-progs
build
build-compare
busybox
buteo-mtp-qt5
buteo-sync-plugin-caldav
buteo-sync-plugin-carddav
buteo-sync-plugins-email
buteo-sync-plugins-qt5
buteo-syncfw-qt5
buteo-syncml-qt5
byacc
bzip2
ca-certificates
cairo
calligra
calligra-extra-cmake-modules
ccache
check
chrpath
cloog
cmake
commhistory-daemon
connectionagent-qt5
connman
connman-qt5
contactsd
cor
coreutils
cpio
cppunit
crash-reporter
crda
cross-armv6l-binutils
cross-armv6l-gcc
cross-armv6l-sysroot
cross-armv7hl-binutils
cross-armv7hl-gcc
cross-armv7hl-gdb
cross-armv7hl-sysroot
cross-armv7l-binutils
cross-armv7l-gcc
cross-armv7l-platformfile
cross-armv7l-sysroot
cross-armv7thl-binutils
cross-armv7thl-gcc
cross-armv7thl-sysroot
cross-armv7tnhl-binutils
cross-armv7tnhl-gcc
cross-armv7tnhl-platformfile
cross-armv7tnhl-sysroot
cross-glibc-devel-inject
cross-glibc-headers-inject
cross-glibc-inject
cross-i486-binutils
cross-i486-gcc
cross-i486-gdb
cross-i486-sysroot
cross-kernel-headers-inject
cross-mipsel-binutils
cross-mipsel-gcc
cross-mipsel-sysroot
cross-template-sysroot
cryptsetup-luks
cups
curl
cutes-js
cutes-qt5
cvs
db4
dbus
dbus-glib
dbus-python
dbus-python3
dconf
deltarpm
desktop-file-utils
device-mapper
diffstat
diffutils
doxygen
droid-fonts
dsme
e2fsprogs
ed
elfutils
embedlite-components-qt5
enchant
eventfeed-qt5
exempi
expat
fakechroot
fakeroot
farstream
fbset
fdupes
fftune
file
filesystem
findutils
fingerterm
flac
flex
fontconfig
fontpackages
freetype
fuse
gawk
gcc
gconf
gdb
gdbm
geoclue
gettext
giflib
git-minimal
gittin
glib-networking
glib2
glibc
gmime
gmp
gnome-common
gnupg2
gnutls
gobject-introspection
gperf
grep
grilo
grilo-plugins
grilo-qt5
groff
grubby
gssdp
gst-av
gst-colorconv
gst-droidcamsrc
gst-ffmpeg
gst-jolla
gst-omx
gst-plugins-bad
gst-plugins-bad-free
gst-plugins-base
gst-plugins-good
gstreamer
gstreamer1.0
gstreamer1.0-plugins-bad
gstreamer1.0-plugins-base
gstreamer1.0-plugins-good
gupnp
gupnp-av
gupnp-dlna
gzip
hunspell
hwdata
icu
icu52
intltool
iotop
iproute
iptables
iputils
iso-codes
iw
jolla-bootchart
json-c
kbd
kbuild
kcalcore-qt5
kernel-adaptation-pc
kernel-adaptation-sbj
kernel-headers
kmod
lcms
libaccounts-glib
libaccounts-qt5
libarchive
libassuan
libasyncns
libatomic_ops
libav
libbluez-qt5
libcanberra
libcap
libcommhistory-qt5
libcontacts-qt5
libcontentaction-qt5
libcreds3
libdres-ohm
libdrm
libdsme
libedit
libeigen2-headers
libenca
libexif
libffi
libgcrypt
libgdata
libgee
libgpg-error
libgsf
libhybris-sbj
libical
libid3tag
libidn
libiodata-qt5
libiphb
libiptcdata
libjpeg
libksba
libmediaart
libmlocale-qt5
libmng
libngf
libngf-qt5
libnice
libnl
liboauth
libogg
libopenal
libpcap
libpciaccess
libpng
libprofile-qt5
libprolog
libpthread-stubs
libpurple
libqofono-qt5
libqt5sparql
libquillmetadata-qt5
libquvi
libquvi-scripts
libresource
libresourceqt-qt5
librest
libsailfishapp
libsailfishkeyprovider
libsbc
libsdl2
libsdl2-gfx
libsdl2-image
libsdl2-mixer-mp3
libsdl2-net
libsdl2-sound-mp3
libsdl2-ttf
libshadowutils
libsignon-glib
libsignon-qt5
libsmack
libsndfile
libsocialcache
libsolv
libsoup
libsysperf
libsystrace
libtalloc
libtasn1
libtheora
libtiff
libtool
libtrace-ohm
libusb
libusb1
libuser
libutempter
libvorbis
libwbxml2
libwspcodec
libxkbcommon
libxml2
libxml2-python
libxslt
libyaml
libzypp
lipstick-qt5
llvm
lsof
lua
lzo
lzop
m4
mailcap
make
MAKEDEV
maliit-framework-wayland
maliit-plugins
mapplauncherd
mapplauncherd-booster-qtcomponents-qt5
mapplauncherd-qt5
mascara
mce
mce-headers
mce-plugin-libhybris
meego-lsb
meego-rpm-config
mer-kernel-checks
mer-kickstarter-configs
mer-release
mesa
mingetty
mkcal-qt5
mkdevnodes
mkinitrd
mlite-qt5
mms-engine
mobile-broadband-provider-info
mpc
mpfr
mtdev
multi_c_rehash
nano
nasm
ncurses
nemo-configs-n950-n9
nemo-control-panel-applets
nemo-gst-interfaces
nemo-keepalive
nemo-password-manager
nemo-qml-plugin-accounts-qt5
nemo-qml-plugin-alarms-qt5
nemo-qml-plugin-calendar-qt5
nemo-qml-plugin-configuration-qt5
nemo-qml-plugin-connectivity
nemo-qml-plugin-contacts-qt5
nemo-qml-plugin-contextkit-qt5
nemo-qml-plugin-dbus-qt5
nemo-qml-plugin-email-qt5
nemo-qml-plugin-messages-internal-qt5
nemo-qml-plugin-notifications-qt5
nemo-qml-plugin-policy-qt5
nemo-qml-plugin-signon-qt5
nemo-qml-plugin-social-qt5
nemo-qml-plugin-systemsettings
nemo-qml-plugin-thumbnailer-qt5
nemo-qml-plugin-time-qt5
nemo-qtmultimedia-plugins
nemo-theme-default
net-tools
ngfd
ngfd-plugin-pulse
nspr
nss
ntp
obex-capability
obexd
ofono
ohm
ohm-plugins-misc
ohm-rule-engine
oneshot
openconnect
openobex
openssh
openssl
openvpn
orc
package-groups
PackageKit
PackageKit-Qt5
pacrunner
pacrunner-cutes
pam
pango
passwd
patch
patchelf
pcre
perl
perl-HTML-Parser
perl-HTML-Tagset
perl-libwww-perl
perl-Test-Pod
perl-TimeDate
perl-URI
perl-XML-Parser
pixman
pkcs11-helper
pkgconfig
pm-utils
policy-settings-common
polkit
polkit-qt-1
poppler
popt
powertop
ppl
prelink
procps
profiled
protobuf
provisioning-service
psmisc
psutils
pth
pulseaudio
pulseaudio-modules-droid-sbj
pulseaudio-modules-nemo
pulseaudio-policy-enforcement
pygobject2
pyOpenSSL
pyotherside
python
python-cairo
python-docutils
python-imaging
python-jinja2
python-lxml
python-M2Crypto
python-magic
python-markdown
python-markupsafe
python-pygments
python-setuptools
python-sphinx
python-twisted
python-yaml
python-zope-interface
python3
python3-cairo
python3-gobject
qemu-usermode
qemu-usermode-static
qmf-notifications-plugin
qmf-notifications-plugin-all-translations
qmf-qt5
qml-rpm-macros
qmsystem-qt5
qt-components-qt5
qt3d
qt5-feedback-haptics-ffmemless
qt5-plugin-generic-vboxtouch
qt5-qpa-hwcomposer-plugin-sbj
qt5-qtdocgallery
qtaround
qtbase
qtchooser
qtconnectivity
qtcontacts-sqlite-qt5
qtdeclarative
qtfeedback
qtgraphicaleffects
qtimageformats
qtlocation
qtlocation-plugin-position-geoclue
qtmozembed-qt5
qtmultimedia
qtpim
qtscenegraph-adaptation-sbj
qtscript
qtsensors
qtsvg
qtsystems
qttools
qtwayland
qtwebkit5
qtxmlpatterns
quazip
quillimagefilter-qt5
quilt
readline
recode
repomd-pattern-builder
rfkill
rootfiles
rpm
rpm-python
rpmlint
rpmlint-MeeGo
rpmlint-mini
rsync
ruby
rygel
rygel-gst-plugins
sailfish-api-patterns
sailfish-browser
sailfish-office
sailfish-polkit-agent
sb2-tools-armv6l
sb2-tools-armv7hl
sb2-tools-armv7l
sb2-tools-armv7thl
sb2-tools-armv7tnhl
sb2-tools-i486
sb2-tools-mipsel
sb2-tools-qt5-armv7hl
sb2-tools-template
scons
scratchbox2
screen
sd-utils
sdk-deploy-rpm
sed
sensorfw-qt5
sensorfw-qt5-hybris
setup
shadow-utils
shared-mime-info
sharutils
signon-plugin-oauth2-qt5
smpeg
sociald
sofia-sip
sound-theme-freedesktop
sp-endurance
sp-rich-core
sp-smaps
speex
sqlite
ssu
statefs
statefs-loader-qt5
statefs-providers
statefs-qt5
strace
swi-prolog
swig
systemd
systemd-user-session-targets
systemtap
taglib
tar
tcl
tcpdump
telepathy-accounts-signon
telepathy-farstream
telepathy-gabble
telepathy-glib
telepathy-haze
telepathy-mission-control
telepathy-qt5
telepathy-rakia
telepathy-ring
texinfo
the-vault
time
timed-qt5
tinycdb
tmpwatch
tone-generator
totem-pl-parser
tracker-libav
transfer-engine-qt5
ttmkfdir
tumbler
tut
tzdata
tzdata-timed
unzip
upower
usb-moded
usbutils
uthash
util-linux
uuid
vala
valgrind
vault
vim
virtualbox
vmtouch
voicecall-qt5
vpnc
wayland
wireless-regdb
wireless-tools
wpa_supplicant
xdg-user-dirs
xdg-utils
xkeyboard-config
xulrunner-qt5
xz
yasm
zip
zlib
zypper

Last edited by plolic; 2015-04-30 at 05:07.
 
Reply


 
Forum Jump


All times are GMT. The time now is 14:34.