Active Topics
-
Error after installing Leste on sdcard (18)
to Maemo 7 / Leste by Maemish - 10 hrs, 22 mins ago -
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 2 days, 5 hrs ago -
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 2 days, 5 hrs ago -
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 4 days, 9 hrs ago - more...
|
2008-06-28
, 00:55
|
|
Posts: 9 |
Thanked: 0 times |
Joined on Jun 2008
|
#182
|
Hi
I have updated the sys to the Diablo and re-run the whole process. But at the end of initfs_flash, it reported an error "unkown initfs version 2008-24, cannot install bootmenu"
So, do we have any update solution for Diablo?
I have updated the sys to the Diablo and re-run the whole process. But at the end of initfs_flash, it reported an error "unkown initfs version 2008-24, cannot install bootmenu"
So, do we have any update solution for Diablo?
|
|
2008-06-28
, 01:31
|
|
Posts: 9 |
Thanked: 0 times |
Joined on Jun 2008
|
#183
|
http://www.internettablettalk.com/fo...=19639&page=27
seems to work... but i didnt like the partion size it created
seems to work... but i didnt like the partion size it created
 |
|
2008-06-28
, 01:36
|
|
Posts: 3,096 |
Thanked: 1,525 times |
Joined on Jan 2006
@ Michigan, USA
|
#184
|
Originally Posted by Scr
no typing needed
Guys,i've got a problem..I tried to make a dual boot on my n810 according to instruction on 1st page, after a command " tar zxvf initfs_flasher.tgz cd initfs_flasher/ ./initfs_flash " after extracting some files(as far as i understand) it said " tar: cd: not found in archive "
What should i have to do?
Thanks
http://penguinbait.com/bootmenu-installer.deb
http://www.internettablettalk.com/fo...ad.php?t=21344
__________________
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
Last edited by penguinbait; 2008-06-28 at 01:39.
|
|
2008-06-28
, 01:56
|
|
Posts: 9 |
Thanked: 0 times |
Joined on Jun 2008
|
#185
|
but, penguinbait
by using bootmenu from your work, what is the correct steps for the HOW TO guide now? I guess some steps may no longer needed, while some steps still require mannual input
Last edited by whereur; 2008-06-28 at 02:01.
by using bootmenu from your work, what is the correct steps for the HOW TO guide now? I guess some steps may no longer needed, while some steps still require mannual input
Last edited by whereur; 2008-06-28 at 02:01.
|
|
2008-06-29
, 20:22
|
|
Posts: 1,950 |
Thanked: 1,174 times |
Joined on Jan 2008
@ Seattle, USA
|
#186
|
Originally Posted by whereur
I think the HOW TO guide in this thread is pretty much history after Penguinbait's .deb. As you can see, I've modified my signature
but, penguinbait
by using bootmenu from your work, what is the correct steps for the HOW TO guide now? I guess some steps may no longer needed, while some steps still require mannual input
It's possible my HOW TO offers more flexibility than Penguinbait's .deb, though possbily not after he added these helpful tools. If someone finds uses for the HOW TO, which aren't covered by the easy-to-use deb, please post them here. I'm kind of rusty at it all by now and don't really know.
__________________
.
. .
Help Save This Forum for N8x0/Diablo Users! Register and Vote for Solution #1 on this Brainstorm. (The Solution will let you see New Posts with any threads you choose -- like the N900 and Maemo5/Fremantle threads -- filtered out.) (To understand the Solution better, see these posts #17, #18, and #19.)
.
. .
Help Save This Forum for N8x0/Diablo Users! Register and Vote for Solution #1 on this Brainstorm. (The Solution will let you see New Posts with any threads you choose -- like the N900 and Maemo5/Fremantle threads -- filtered out.) (To understand the Solution better, see these posts #17, #18, and #19.)
Last edited by GeraldKo; 2008-06-29 at 21:56.
 |
|
2008-08-14
, 13:30
|
|
Posts: 664 |
Thanked: 160 times |
Joined on Jul 2008
@ Australia
|
#187
|
Hi, I've been tryin to boot from mmc in my IT for a while now but I'm getting nothing but frustrations. I've followed all the step by step guides I can find but I'm stuck somewhere. I find you very easy and was going smooth as well until I hit the comman at the kind of end: # ./nupgrade.sh wipe, I get the following error:
================================================== =========
Target device: Internal Flash card, second partition (/dev/mmcblk0p2)
Using filesystem: ext2fs
Continue? (YES/no) : YES
Reformatting Internal Flash card, second partition for Sardine using ext2fs...
Unable to locate mbcache.ko - aborting
================================================== ==========
Then I'm helpless. So can you please help me through this. Any help will be greatly appriciated. I also did this from the another guid: '# insmod /mnt/initfs/lib/modules/2.6.21-omap1/mbcache.ko' but it says: File already exists. So, please help me get thru it. Thanks.
I edited the code in nupgrade.sh as I noticed it bit different than what my IT had and it rolled.
BACK TO STUCK: I got excited to get it rolling then in the verbose it was echoing can't open file doesn't exist something. But still it was rolling but then it stopped saying no space. Then I looked in control panel and device memory is full, internal memory is corrupted and my removable memory if fit and healthy. So, I reformatted internal memory and tried "umount /media/mmc2" coz before I entered mmc1 but still the internal memory is said to corrupted and removable is healthy again. So, please clear me about whats happening here.. thanks
Last edited by jaeezzy; 2008-08-14 at 14:42. Reason: Run out of space....
================================================== =========
Target device: Internal Flash card, second partition (/dev/mmcblk0p2)
Using filesystem: ext2fs
Continue? (YES/no) : YES
Reformatting Internal Flash card, second partition for Sardine using ext2fs...
Unable to locate mbcache.ko - aborting
================================================== ==========
Then I'm helpless. So can you please help me through this. Any help will be greatly appriciated. I also did this from the another guid: '# insmod /mnt/initfs/lib/modules/2.6.21-omap1/mbcache.ko' but it says: File already exists. So, please help me get thru it. Thanks.
I edited the code in nupgrade.sh as I noticed it bit different than what my IT had and it rolled.
BACK TO STUCK: I got excited to get it rolling then in the verbose it was echoing can't open file doesn't exist something. But still it was rolling but then it stopped saying no space. Then I looked in control panel and device memory is full, internal memory is corrupted and my removable memory if fit and healthy. So, I reformatted internal memory and tried "umount /media/mmc2" coz before I entered mmc1 but still the internal memory is said to corrupted and removable is healthy again. So, please clear me about whats happening here.. thanks
Last edited by jaeezzy; 2008-08-14 at 14:42. Reason: Run out of space....
|
|
2008-08-24
, 09:35
|
|
Posts: 664 |
Thanked: 160 times |
Joined on Jul 2008
@ Australia
|
#188
|
hi, now that i've finally did the cloning to my internal memory of my n810, I'm obviously very happy. but recently, as I wiped out all my map data while doing that, i tried to download map data but i got message that my internal memory is only 12 mb. so, after the cloning of OS to internal memory here's my memory details:
device - 1.4GB available
internal memory - 12 mb available
external memory - 968 mb available (it is jus 1GB card)
so what should i do to be able to download map in my IT. Thanks
device - 1.4GB available
internal memory - 12 mb available
external memory - 968 mb available (it is jus 1GB card)
so what should i do to be able to download map in my IT. Thanks
|
|
2008-08-24
, 17:55
|
|
Posts: 4,030 |
Thanked: 1,633 times |
Joined on Jul 2007
@ nd usa
|
#189
|
Originally Posted by jaeezzy
Move the whole map folder to external memory. The program will find the map folder and dl to the right spot. However, it is still too small for map, you need more than 1.5G. When dl a 800 MB map, you may need 1G or 1.1 G for working space.
...device - 1.4GB available
internal memory - 12 mb available
external memory - 968 mb available (it is jus 1GB card)
so what should i do to be able to download map in my IT. Thanks
bun
__________________
WorldTV99, WorldTV99forN900, more, VCURLs72, Shortcuts; complete backup; gvm software; 2007He; LiveTV;
DualBoot
WorldTV99, WorldTV99forN900, more, VCURLs72, Shortcuts; complete backup; gvm software; 2007He; LiveTV;
DualBoot
|
|
2008-08-25
, 13:44
|
|
Posts: 664 |
Thanked: 160 times |
Joined on Jul 2008
@ Australia
|
#190
|
Thanks bun, btw I only download australia map which is just 84 mb. So, it should be alright. Also, though I have edited the bootmenu to appear while booting from 30 to 120 still it goes off in a blink and the OS boots from flash. So, what can I do, how about removing OS image from the flash, that way, I'll have space left as well but I have no idea how I can do that or should I be doing in the very first place? Thanks
Edit: It works.
Last edited by Laughing Man; 2008-06-27 at 16:32.