Active Topics
-
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,580)
to Nokia N9 / N950 by aspergerguy - 5 hrs, 23 mins ago -
Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 3 days, 1 hr ago -
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 3 days, 14 hrs ago -
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 4 days, 4 hrs ago - more...
whats_up_skip |
2009-12-21
, 09:27
|
|
Posts: 69 |
Thanked: 14 times |
Joined on Dec 2009
|
#1
|
Is it possible to set the codec used in the N900 SIP VoIP client?
 |
|
2009-12-21
, 12:50
|
|
Posts: 1,665 |
Thanked: 1,649 times |
Joined on Jun 2008
@ Praha, Czech Republic
|
#2
|
Examples for codecs that you want to set, please?
__________________
maemo.org Bugmaster
maemo.org Bugmaster
|
|
2009-12-21
, 21:54
|
|
Posts: 69 |
Thanked: 14 times |
Joined on Dec 2009
|
#3
|
I am not sure which codecs are available, but g729, gsm or ilbc, as these provide better performance over HSPA.
|
|
2009-12-23
, 04:47
|
|
Posts: 23 |
Thanked: 2 times |
Joined on Nov 2009
@ Atlanta, GA United States
|
#4
|
Originally Posted by whats_up_skip
I haven't found anyway to configure the codec using the "VOIP and IM accounts" panel under the settings utility.
Is it possible to set the codec used in the N900 SIP VoIP client?
Moreover, although I can initiate and receive calls, there is a problem with the outbound voice when I'm using my VoIP provider (normal telephone calls work just fine - it's not a dead mic).
|
|
2009-12-23
, 09:46
|
|
Posts: 110 |
Thanked: 32 times |
Joined on Dec 2009
@ Moon
|
#5
|
i can't see any way to change codecs as well, i hope this doesn't mean it defaults to g711 as it would be bad idea for 3g or even on wifi if user got slow upload speed.
for E series there is sip tool on nokia website that let us adjust this so i hope there is a way to change codecs and codecs priority on n900
is quite odd that such simple feature yet so much needed one is missing
for E series there is sip tool on nokia website that let us adjust this so i hope there is a way to change codecs and codecs priority on n900
is quite odd that such simple feature yet so much needed one is missing
 |
|
2009-12-23
, 12:06
|
|
Posts: 288 |
Thanked: 113 times |
Joined on Dec 2009
@ Germany
|
#6
|
I agree!
I was searching for the codec too, but no hit jet.
Would be great if you could tie a codec priority list to the Internet connection used (Wifi, 3G, 2,5G, 2G) or autodetection based on currently available bandwidth.
Cheers
Bjoern
I was searching for the codec too, but no hit jet.
Would be great if you could tie a codec priority list to the Internet connection used (Wifi, 3G, 2,5G, 2G) or autodetection based on currently available bandwidth.
Cheers
Bjoern
__________________
My website:My Applications:
My website:My Applications:
|
|
2009-12-24
, 07:33
|
|
Posts: 69 |
Thanked: 14 times |
Joined on Dec 2009
|
#7
|
I suspect by the poor quality of outbound sound on HSPA that it is either defaulting to ulaw (g711) or has the priority set as ulaw first.
I will try to do some more testing tomorrow to see what I can work out.
There is another issue with the VoIP system I noticed:
If you have more than SIP account registered and you select a name from the contact list it offers "phone" or "sip audio" numbers, but it does not tell you which sip account it is going to use.
I will try to do some more testing tomorrow to see what I can work out.
There is another issue with the VoIP system I noticed:
If you have more than SIP account registered and you select a name from the contact list it offers "phone" or "sip audio" numbers, but it does not tell you which sip account it is going to use.
 |
|
2009-12-24
, 07:39
|
|
Posts: 739 |
Thanked: 242 times |
Joined on Sep 2007
@ Montreal
|
#8
|
Originally Posted by onestop
Same problem here in asterisk 1.6.2.0 with this (sip.conf) :
I haven't found anyway to configure the codec using the "VOIP and IM accounts" panel under the settings utility.
Moreover, although I can initiate and receive calls, there is a problem with the outbound voice when I'm using my VoIP provider (normal telephone calls work just fine - it's not a dead mic).
allow=gsm,ulaw,alaw,h263,g729
I hope this get fixed in the upcoming release as this is a MAIN feature of this phone!
|
|
2009-12-24
, 07:46
|
|
Posts: 69 |
Thanked: 14 times |
Joined on Dec 2009
|
#9
|
Originally Posted by R-R
What happens if you change it to either:
allow=gsm,ulaw,alaw,h263,g729
allow=g729
or
allow=gsm
This might let us know which codecs are installed.
|
|
2009-12-24
, 09:03
|
|
Posts: 288 |
Thanked: 113 times |
Joined on Dec 2009
@ Germany
|
#10
|
Originally Posted by whats_up_skip
See the bug in my signature. Please vote for it. It might as well resolve your issue.
There is another issue with the VoIP system I noticed:
If you have more than SIP account registered and you select a name from the contact list it offers "phone" or "sip audio" numbers, but it does not tell you which sip account it is going to use.
Cheers Bjoern
__________________
My website:My Applications:
My website:My Applications: