Page 2 of 2 1 2
Reply
Thread Tools
paddyc1988 is offline paddyc1988
2010-01-21 , 03:14
Posts: 58 | Thanked: 14 times | Joined on Jan 2010
#11
In my opinion always buy the invisible shield, I bought mine before I even got the phone.
You can either the full body one or just a screen protector but i would recommend the full body.
if you don't want to spend that much then you can get the cheaper ones but all them got mixed reviews so I wouldn't bother.
 
matneee is offline matneee
2010-01-21 , 09:29
Posts: 6 | Thanked: 0 times | Joined on Jun 2007
#12
I fitted one of these last night - http://www.amazon.co.uk/exec/obidos/..._ya_oh_product

Very happy with it. Spent some time cleaning the screen properly and being obsessive/compulsive about dust (seriously - I went into the bathroom to fit it having ran the shower for about 15 mins first to de-dust the room with steam). Extremely clear, and hasn't made a noticeable impact on the screen's responsiveness. I'd certainly buy another one if i needed a replacement somewhere down the line.
Last edited by matneee; 2010-01-21 at 09:35.
 
tnhh is offline tnhh
2010-01-21 , 09:41
Posts: 77 | Thanked: 38 times | Joined on Jan 2010
#13
I bought the Zagg from mobilefun but threw it away - the rubbery feel made the touchscreen very hard to use. Am now using the same ebay protectors as steevp. Delivery only took 2 days, and that was during the worst of the big freeze in early Jan.
 
Bugslife is offline Bugslife
2010-01-21 , 09:50
Posts: 114 | Thanked: 12 times | Joined on Dec 2009
#14
brand clear protector. I'm satisfied with it. stick well. Any excess water will be gone in 24 -48 hours.

The trick is to make sure it has enough water and also make sure your hands is wet to avoid fingerprints. if you made a mistake just lift it again and dab some water. Took me a while but once you got the trick it will be easy. If you get bubbles just lift up to the part of the bubble and just drop water.

I got a full body here:

http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT

They also sell just screen protector:


http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT
 
biggzi is offline biggzi
2010-01-21 , 13:31
Posts: 40 | Thanked: 11 times | Joined on Nov 2009
#15
Originally Posted by Bugslife View Post
brand clear protector. I'm satisfied with it. stick well. Any excess water will be gone in 24 -48 hours.

The trick is to make sure it has enough water and also make sure your hands is wet to avoid fingerprints. if you made a mistake just lift it again and dab some water. Took me a while but once you got the trick it will be easy. If you get bubbles just lift up to the part of the bubble and just drop water.

I got a full body here:

http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT

They also sell just screen protector:


http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT
This is the one im using. Great protection and very easy to fit, even my dog could do it.

You'll probably be looking at a longer delivery time though because the ship from the USA
 
Croc is offline Croc
2010-01-21 , 15:42
Posts: 110 | Thanked: 32 times | Joined on Dec 2009 @ Moon
#16
had Clarivue protectors on for less than one day and took them off, no cut outs for front camera and no cut outs for proximity sensor, also it is way too small, if you line it up to bottom left corrner while installing there is massive gap on top and right edge, gap is so huge n900 logo doesn't even get covered fully.
 
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 10:25.

Contact Us - Home - Archive - Top