Active Topics

 



Notices


Reply
Thread Tools
Posts: 10 | Thanked: 0 times | Joined on Dec 2009
#81
I'm not sure that's right.

I'm not an expert, but I think that the firmware is only responsible for the physical touch, means sending and receiving packets, and doing exactly what the driver tells it to do.
I've seen many wifi PC chipsets that supported injection and promiscuous mode only after patching the driver, and I believe that's what we are dealing with here.

Considering that maemo is fully open source, I guess it shouldn't be too hard.
 
hawaii's Avatar
Posts: 1,030 | Thanked: 792 times | Joined on Jun 2009
#82
Firstly, Maemo is not fully open source. There is a ton that has been closed off, and rightfully so.

Secondly, firmware is not solely responsible for Rx/Tx. The driver merely recommends, the firmware will complete the action. And if the firmware has been neutered to simply not allow packets to be sent down an unconfigured interface, it won't work. Unfortunately, only a few people actually know if this is the case.

The "wifi pc chipsets" you so lawlessly talk about, do not have tertiary loadable firmware, they merely shipped with drivers or used stacks that did not allow it. Patches fixed that.

and I don't mean to completely defecate on you, but you're not an expert, you just said so. So stop.

KTHNX. MODS BE NICE TO ME.
 
OptX's Avatar
Posts: 293 | Thanked: 206 times | Joined on Oct 2009 @ Germnay
#83
What is with that channel 6 problem? Is that fixed now ?
 
Posts: 286 | Thanked: 117 times | Joined on Jan 2010
#84
hey guys! there is a way to get aircrack-ng working on N900 by installing that debian image from the repositoriee and aircrack inside of it. For me it was working and i have got a handshake.....Moreover, airodump-ng is working as well so i suppose that there is a kernel problem in maemo system....
 
Posts: 10 | Thanked: 0 times | Joined on Dec 2009
#85
Originally Posted by crash16 View Post
hey guys! there is a way to get aircrack-ng working on N900 by installing that debian image from the repositoriee and aircrack inside of it. For me it was working and i have got a handshake.....Moreover, airodump-ng is working as well so i suppose that there is a kernel problem in maemo system....
were you able to also inject packets?
 
Posts: 286 | Thanked: 117 times | Joined on Jan 2010
#86
Originally Posted by Big_Bob View Post
were you able to also inject packets?
i haven't tryed that yet..
 
Posts: 64 | Thanked: 4 times | Joined on Dec 2009
#87
Originally Posted by crash16 View Post
hey guys! there is a way to get aircrack-ng working on N900 by installing that debian image from the repositoriee and aircrack inside of it. For me it was working and i have got a handshake.....Moreover, airodump-ng is working as well so i suppose that there is a kernel problem in maemo system....
Intersting! D'you open Debian Lxde and launch if from Debian terminal???
 
Posts: 286 | Thanked: 117 times | Joined on Jan 2010
#88
Originally Posted by alex-000 View Post
Intersting! D'you open Debian Lxde and launch if from Debian terminal???
Yep...you have to install it first....just type sudo apt-get install aircrack-ng..
 
Posts: 30 | Thanked: 0 times | Joined on Feb 2010
#89
I have this installed on my n900 and i canīt find where is it. can some one pleas tell me that.. i dont see any icons for it..
---
Sorry for my eng i have dyslexi
 
Posts: 64 | Thanked: 4 times | Joined on Dec 2009
#90
Originally Posted by crash16 View Post
Yep...you have to install it first....just type sudo apt-get install aircrack-ng..
Great !! I installed id and createad a deskop icon to launch Debian Terminal in my Maemo desktop!!!! Perfect!!!!! I choosed a Mac Terminal 48x48 icon

Last edited by alex-000; 2010-02-03 at 11:31.
 
Reply


 
Forum Jump


All times are GMT. The time now is 21:54.