Notices
Page 1 of 2 1 2
Reply
Thread Tools
nokiahui is offline nokiahui
2010-03-06 , 05:03
Posts: 24 | Thanked: 0 times | Joined on Feb 2010
#1
question , do we need to Flashing the eMMC first or flashing the firmware first?


so this is what i did .it didnt do anything, when i click enter it comes out the flasher 3.5 exe run admin, then i click it , the CMD wont running.
Attached Images
 
Last edited by nokiahui; 2010-03-06 at 06:36.
 
vietn900 is offline vietn900
2010-03-06 , 05:08
Posts: 323 | Thanked: 76 times | Joined on Jan 2010
#2
I always flash FW first
 
nokiahui is offline nokiahui
2010-03-06 , 05:17
Posts: 24 | Thanked: 0 times | Joined on Feb 2010
#3
Originally Posted by vietn900 View Post
I always flash FW first

i see, hey,,when i click run as admin on the flasher-3.5 it it show up in .5 second then command prompt dissapeaar..how is that? something wrong or , how do u do it? my pc is visita 32 bit
 
vietn900 is offline vietn900
2010-03-06 , 05:25
Posts: 323 | Thanked: 76 times | Joined on Jan 2010
#4
you have to do everything in CMD ... the flasher doesn't run like a normal program

i used this guide it was very helpful :

http://discussions.europe.nokia.com/...ata/m-p/591877
 

The Following User Says Thank You to vietn900 For This Useful Post:
rhythmspirit is offline rhythmspirit
2010-03-06 , 05:38
Posts: 24 | Thanked: 6 times | Joined on Feb 2010
#5
flash emmc first. flashing fw first then emmc is pointless because you'll end up flashing fw twice.
 

The Following User Says Thank You to rhythmspirit For This Useful Post:
nokiahui is offline nokiahui
2010-03-06 , 05:45
Posts: 24 | Thanked: 0 times | Joined on Feb 2010
#6
Originally Posted by vietn900 View Post
you have to do everything in CMD ... the flasher doesn't run like a normal program

i used this guide it was very helpful :

http://discussions.europe.nokia.com/...ata/m-p/591877


i just did it, i use CMD type everything in there, it still didnt flash ?
Last edited by nokiahui; 2010-03-06 at 06:19.
 
hollowplayer is offline hollowplayer
2010-03-06 , 07:40
Posts: 41 | Thanked: 17 times | Joined on Dec 2009
#7
if you want completely new fresh out of factory unit then flash emmc first then put on new firmware. if you flash firmware first, all your data and settings still there. pointless
 
vietn900 is offline vietn900
2010-03-06 , 08:16
Posts: 323 | Thanked: 76 times | Joined on Jan 2010
#8
Originally Posted by nokiahui View Post
i just did it, i use CMD type everything in there, it still didnt flash ?
what does it say?

EDIT: that file name is a little short ... did you rename it?
 
buxz777 is offline buxz777
2010-03-06 , 08:20
Posts: 256 | Thanked: 98 times | Joined on Jan 2010
#9
Originally Posted by nokiahui View Post
question , do we need to Flashing the eMMC first or flashing the firmware first?


so this is what i did .it didnt do anything, when i click enter it comes out the flasher 3.5 exe run admin, then i click it , the CMD wont running.
the code/command you have written is really wrong mate this is why it wont work , command prompt needs to be told what to do and you have told it jibberish and thefore it hasnt worked

the command should be like this

flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R

if your emc file is called RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin

then youll write the above into command prompt to get it to work
 

The Following User Says Thank You to buxz777 For This Useful Post:
cryox92 is offline cryox92
2010-03-06 , 09:30
Posts: 114 | Thanked: 62 times | Joined on Jan 2010
#10
Originally Posted by hollowplayer View Post
if you want completely new fresh out of factory unit then flash emmc first then put on new firmware. if you flash firmware first, all your data and settings still there. pointless
When u flash emmc the firmware version does not reset.
 
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 08:22.

Contact Us - Home - Archive - Top