Page 128 of 263 « First 118126127 128 129130138 Last »
Poll: Have you had charging or USB problems with your N900
Poll Options
Have you had charging or USB problems with your N900

Reply
Thread Tools
Bouloute is offline Bouloute
2010-04-10 , 19:48
Posts: 11 | Thanked: 10 times | Joined on Feb 2010
#1271
Hehe I've finally got my N900 back and repaired!!

After waiting for 3 months and sending it 3 times to Nokia Care Center.

It's hasn't been replaced but repaired. Anyway, i got it, and it works, it's been quite long but thanks Nokia
 

The Following 2 Users Say Thank You to Bouloute For This Useful Post:
Arrancamos is offline Arrancamos
2010-04-10 , 20:03
Posts: 154 | Thanked: 33 times | Joined on Oct 2009 @ Lima-Perú
#1272
Originally Posted by shadowjk View Post
Did you also send in the charger?

Showing charging for 10-20 sec is what my n900 does when I connect it to my switched-off tekkeon mp1550, so it might be your charger..
can't be the charger cuz same behavior when using usb cable to charge.it. really crap and am really frustrated.

now, i can't turn it on, no battery, can't charge it. can't reflash it to try. this really sucks for me.

I have a fixed and replaced device with micro usb firmly attached that simple doen't charge.
What kind of QA they did!! OMFG!!!
__________________
Sent from my Nokia1112
Follow me @ Twitter Arrancamos
Testing Qt, Qt Mobility, Maemo SDK
 
YoDude's Avatar
YoDude is offline YoDude
2010-04-11 , 01:07
Posts: 2,869 | Thanked: 1,784 times | Joined on Feb 2007 @ Po' Bo'. PA
#1273
Originally Posted by Bouloute View Post
Hehe I've finally got my N900 back and repaired!!

After waiting for 3 months and sending it 3 times to Nokia Care Center.

It's hasn't been replaced but repaired. Anyway, i got it, and it works, it's been quite long but thanks Nokia
That's^ interesting. I wonder if they replaced the board and if that "board" has now been redesigned.
__________________

SLN member # 009
 
cr0c0 is offline cr0c0
2010-04-11 , 02:03
Posts: 147 | Thanked: 228 times | Joined on Feb 2010 @ Toronto, Canada
#1274
Originally Posted by YoDude View Post
That's^ interesting. I wonder if they replaced the board and if that "board" has now been redesigned.
Yes and no. There's no way to repair the board once the USB port rips off, so it's definitely a replacement. But I can pretty much guarantee that they haven't redesigned it beyond enlarging the underside epoxy patches.

I'd love to be proven wrong though.
 
gabby131 is offline gabby131
2010-04-11 , 02:29
Posts: 1,729 | Thanked: 388 times | Joined on Jan 2010 @ Canada
#1275
Originally Posted by cr0c0 View Post
Yes and no. There's no way to repair the board once the USB port rips off, so it's definitely a replacement. But I can pretty much guarantee that they haven't redesigned it beyond enlarging the underside epoxy patches.

I'd love to be proven wrong though.
i believe so, what has been done is done....i guess
 
YoDude's Avatar
YoDude is offline YoDude
2010-04-11 , 05:32
Posts: 2,869 | Thanked: 1,784 times | Joined on Feb 2007 @ Po' Bo'. PA
#1276
Originally Posted by cr0c0 View Post
Yes and no. There's no way to repair the board once the USB port rips off, so it's definitely a replacement. But I can pretty much guarantee that they haven't redesigned it beyond enlarging the underside epoxy patches.

I'd love to be proven wrong though.
The reason for my remark is that previously they were determined to be "Beyond Economic Repair". That could have very well meant that in these "just in time" economic times the boards that were being produced may have been slated for unit production and it was not economical to rob Peter to pay Paul.

Either unit production recently fell and they just continued producing the boards at the higher rate in order to stock pile parts or parallel production of these boards in another facility has begun. If the latter is the case then a redesign would make economic sense.
__________________

SLN member # 009
 
Texrat's Avatar
Texrat is offline Texrat
2010-04-11 , 05:35
Posts: 11,700 | Thanked: 10,045 times | Joined on Jun 2006 @ North Texas, USA
#1277
Technically the boards can be repaired, but it's not worth it to Nokia (repair is labor-intensive) and the result would likely look second-rate.
__________________
Nokia Developer Champion
Different <> Wrong | Listen - Judgment = Progress | People + Trust = Success
My personal site: http://texrat.net
 
Bouloute is offline Bouloute
2010-04-11 , 09:43
Posts: 11 | Thanked: 10 times | Joined on Feb 2010
#1278
The technician did tell me that the motherboard was replaced.

I put an Invisible Shield on the screen and on every corner of the phone, the protection are still there, so It is the same phone
 
EMAD's Avatar
EMAD is offline EMAD
2010-04-12 , 06:45
Posts: 16 | Thanked: 4 times | Joined on Dec 2009 @ Ontario, Canada
#1279
It has been four months and this hasn't been a problem so far. It seems to toggle between charge/discharge quickly with slight movement though. I hope that is just normal behaviour and not a symptom.

I really wish that this doesn't become an issue because apparently the warranty is not extended to Canadian residents

The poll gives me a positive vibe but those that suffered, can you please tell me how many charges until the port stopped working and what were the symptoms?

Thanks.
 

The Following User Says Thank You to EMAD For This Useful Post:
ZlmGu is offline ZlmGu
2010-04-12 , 15:22
Posts: 4 | Thanked: 2 times | Joined on Apr 2010 @ Belgium
#1280
My USB port died on me about 4 weeks ago. I sent it to this repair center, and it was covered by warranty. 2 weeks later it was sent back without my stylus and my USB port was still not working. The tech guys had 'electronically repaired the software'. I had to send it back, and I'm still waiting to get my N900 back. I have to use this crappy cell phone in the mean time, and I hate it..
 

The Following User Says Thank You to ZlmGu For This Useful Post:
Reply
Page 128 of 263 « First 118126127 128 129130138 Last »

Tags
bad design, broken, charging, failure, hardware, loose, microusb, microusb port, n900, nokia, part, port, repair, return, surface mount, usb, usb port, warranty

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 09:40.

Contact Us - Home - Archive - Top