Active Topics

 



Notices
Page 10 of 11 « First 89 10 11
Reply
Thread Tools
RMOnline is offline RMOnline
2011-01-16 , 01:18
Posts: 2 | Thanked: 1 time | Joined on Jan 2011
#91
hi yabba,

thank's for the very useful software, but i've a problem to enjoy with my sony alpha 55, because it won't work properly.
I've installed pykake 7.3.2 on a n900,rebooted the system and choosen remote control on my camera. But if pressed the shutter button pointing to my camera nothing happens.
I think, that the command strings of minolta cams are not the same as sony's newer alpha camera generation. Please tell me what maybe the reason for this malfunction.
 

The Following User Says Thank You to RMOnline For This Useful Post:
Yabba is offline Yabba
2011-01-16 , 12:52
Posts: 47 | Thanked: 41 times | Joined on Jan 2010 @ Finland
#92
Originally Posted by RMOnline View Post
I think, that the command strings of minolta cams are not the same as sony's newer alpha camera generation. Please tell me what maybe the reason for this malfunction.
Your quesses are as good as mine, I don't have Minolta neither Alpha to test them, so I just added that Minolta remote (which was said that it may work with Alpha), crossed my fingers and kicked it to the autobuilder, because that is all I can do for cameras not made by Olympus.

Anyway, here is short check list to find plausible errors:
1. Does the IR sensor blink (just watch it trought the live view), if not, then the problem is in device (my sensor is blinking), or if you have irreco installed, it might cause some errors for lirc files.
2. If you run the pykake from the xterm (python /opt/pykake/pykake.py), do you get any error output?
3. Double check that you have set your camera in Remote mode, so it knows to look out for IR signal.
Last edited by Yabba; 2011-01-16 at 12:57.
 
RMOnline is offline RMOnline
2011-01-16 , 18:32
Posts: 2 | Thanked: 1 time | Joined on Jan 2011
#93
Originally Posted by Yabba View Post
Your quesses are as good as mine, I don't have Minolta neither Alpha to test them, so I just added that Minolta remote (which was said that it may work with Alpha), crossed my fingers and kicked it to the autobuilder, because that is all I can do for cameras not made by Olympus.

Anyway, here is short check list to find plausible errors:
1. Does the IR sensor blink (just watch it trought the live view), if not, then the problem is in device (my sensor is blinking), or if you have irreco installed, it might cause some errors for lirc files.
No, i havnīt installed irreco and my ir-led isnīt blinking (watched by live view as told)
2. If you run the pykake from the xterm (python /opt/pykake/pykake.py), do you get any error output?
Iīve tried this, but there is no error shown and it starts up properly
3. Double check that you have set your camera in Remote mode, so it knows to look out for IR signal.
Itīs seemingly a problem of my device. Iīll test some other ir apps in front of the camera and maybe try to reinstall my firmware. If iīve got it working, iīll tell you my solutionThankīs for your fast response
 
Nokia 5700 is offline Nokia 5700
2011-01-16 , 22:16
Posts: 298 | Thanked: 197 times | Joined on Dec 2009 @ Norway
#94
Doesnt work for my Sony A500, either.
LIRC starts successfully and has started it's daemon. There is no error outputed when i try the Shutter button.
However... i cant see a red light through the live-view... i know that it has captured invisible light before in the same way, but it didnt this time. (Might be too dark?)
Any advice? I rebooted once.
 
fWR is offline fWR
2011-01-28 , 20:15
Posts: 1 | Thanked: 0 times | Joined on Jan 2011 @ Moscow
#95
Originally Posted by Nokia 5700 View Post
Doesnt work for my Sony A500, either.
LIRC starts successfully and has started it's daemon. There is no error outputed when i try the Shutter button.
However... i cant see a red light through the live-view... i know that it has captured invisible light before in the same way, but it didnt this time. (Might be too dark?)
Any advice? I rebooted once.
Same thing with me. No response from Alpha 500((
 
Fleet68 is offline Fleet68
2011-07-20 , 10:51
Posts: 2 | Thanked: 1 time | Joined on Sep 2010 @ FRANCE
#96
Hi all.

I've found a lirc file on dpreview with all the RMT-DSLR1 buttons scaned.
Names S and S2 should be the instant shoot and 2s delay shoot.

Yabba, is that possible to you including it in your file format ?
That would be great if we had a conf file where include our raw codes.
Regards

Full lirc file
http://mjr.org/RMT-DSLR1.lirc

shot and 2s delay

Code:
begin remote
	name	RMT-DSLR1
	flags	RAW_CODES|CONST_LENGTH
	eps	30
	aeps	100
	gap	11877
		begin raw_codes

			name S2
				2336 646 1168 621 1168 621 
				1168 621 572 621 1168 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1168 621 572 621 
				572 646 572 621 1168 621 
				1168 621 1168 621 1168 10411 
				2336 621 1168 621 1168 621 
				1168 621 572 621 1168 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1168 621 572 621 
				572 646 572 621 1168 621 
				1168 621 1168 621 1168 10436 
				2336 646 1168 621 1168 621 
				1168 621 572 621 1168 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1168 621 572 621 
				572 646 572 621 1168 621 
				1168 621 1168 621 1168 10411 
				2336 646 1168 621 1168 621 
				1168 621 572 621 1168 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1168 621 572 621 
				572 646 572 621 1168 621 
				1168 621 1168 621 1168 10411 
				2336 621 1168 621 1168 621 
				1168 621 572 621 1168 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1168 621 572 621 
				572 646 572 621 1168 621 
				1168 621 1168 621 1168 

			name S
				2336 646 1168 621 572 621 
				1168 621 1168 621 572 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1168 621 572 621 
				572 646 572 621 1168 621 
				1168 621 1168 621 1168 11008 
				2336 621 1168 621 572 621 
				1168 621 1168 621 572 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1168 621 572 621 
				572 646 572 621 1168 621 
				1168 621 1168 621 1168 11008 
				2336 621 1168 621 572 621 
				1168 621 1168 621 572 621 
				1168 621 572 646 572 621 
				1168 621 572 621 1168 621 
				1168 621 1093 696 572 621 
				572 621 572 621 572 1218 
				497 1292 422 1367 373 11803 
				298 2659 199 1590 174 1019 
				174 1615 174 1615 149 1044 
				149 1640 124 1093 149 1044 
				124 1665 124 1068 124 1665 
				99 1690 99 1690 99 1093 
				99 1118 99 1093 99 1690 
				99 1690 75 1715 75 12101 
				149 2833 75 1715 75 1118 
				75 1715 75 1715 75 1118 
				75 1715 75 1118 99 1093 
				99 1690 99 1093 99 1690 
				99 1690 99 1690 99 1093 
				99 1118 99 1093 99 1690 
				99 1690 99 1690 99 

		end raw_codes
end remote
 
peterch405 is offline peterch405
2011-08-20 , 01:12
Posts: 22 | Thanked: 6 times | Joined on Sep 2010
#97
I just tested the pykabe 0.7.3 (newest version). I went ahead and installed irreco so as to have the full IR package.
When I had pykabe running and tested it with my canon, nothing happened. On rare occations the lens autofocused, but nothing beyond that. So I went over the irreco and tried that, nothing. So while having both apps running I switched over to pykabe and suddenly everything worked as it should. After a little experimenting I came to the conclusion that pykabe doesn't work without having irreco running in the background.
 

The Following User Says Thank You to peterch405 For This Useful Post:
sonicx1234 is offline sonicx1234
2011-09-26 , 12:02
Posts: 1 | Thanked: 1 time | Joined on Sep 2011
#98
It works Perfectly with my 550d!!! I was looking to invest in a remote shutter release to do long exposure photography without touching my dslr, now I dont have to! Great Work hope you keep creating such software!
 

The Following User Says Thank You to sonicx1234 For This Useful Post:
cipper is offline cipper
2011-12-02 , 11:29
Posts: 169 | Thanked: 56 times | Joined on Jan 2010 @ Italia
#99
I got it working on Sony NEX by replacing the /opt/pykake/cameras/minolta/RC3 with the following:

begin remote
name Minolta_RC3
flags RAW_CODES
eps 30
aeps 100
gap 11877
begin raw_codes

name two_sec
2336 646 1168 621 1168 621
1168 621 572 621 1168 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1168 621 572 621
572 646 572 621 1168 621
1168 621 1168 621 1168 10411
2336 621 1168 621 1168 621
1168 621 572 621 1168 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1168 621 572 621
572 646 572 621 1168 621
1168 621 1168 621 1168 10436
2336 646 1168 621 1168 621
1168 621 572 621 1168 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1168 621 572 621
572 646 572 621 1168 621
1168 621 1168 621 1168 10411
2336 646 1168 621 1168 621
1168 621 572 621 1168 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1168 621 572 621
572 646 572 621 1168 621
1168 621 1168 621 1168 10411
2336 621 1168 621 1168 621
1168 621 572 621 1168 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1168 621 572 621
572 646 572 621 1168 621
1168 621 1168 621 1168

name one_sec
2336 646 1168 621 572 621
1168 621 1168 621 572 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1168 621 572 621
572 646 572 621 1168 621
1168 621 1168 621 1168 11008
2336 621 1168 621 572 621
1168 621 1168 621 572 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1168 621 572 621
572 646 572 621 1168 621
1168 621 1168 621 1168 11008
2336 621 1168 621 572 621
1168 621 1168 621 572 621
1168 621 572 646 572 621
1168 621 572 621 1168 621
1168 621 1093 696 572 621
572 621 572 621 572 1218
497 1292 422 1367 373 11803
298 2659 199 1590 174 1019
174 1615 174 1615 149 1044
149 1640 124 1093 149 1044
124 1665 124 1068 124 1665
99 1690 99 1690 99 1093
99 1118 99 1093 99 1690
99 1690 75 1715 75 12101
149 2833 75 1715 75 1118
75 1715 75 1715 75 1118
75 1715 75 1118 99 1093
99 1690 99 1093 99 1690
99 1690 99 1690 99 1093
99 1118 99 1093 99 1690
99 1690 99 1690 99

end raw_codes
end remote
Last edited by cipper; 2011-12-02 at 13:39.
 

The Following 3 Users Say Thank You to cipper For This Useful Post:
mkkyah is offline mkkyah
2011-12-05 , 18:38
Posts: 22 | Thanked: 2 times | Joined on Jul 2010
#100
I can confirm that A77 works with cipper's fix. Don't forget to run irreco and pyKake together.
Thank you
 
Reply
Page 10 of 11 « First 89 10 11

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 07:25.

Contact Us - Home - Archive - Top