Active Topics
-
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,580)
to Nokia N9 / N950 by aspergerguy - 11 hrs, 31 mins ago -
Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 3 days, 7 hrs ago -
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 3 days, 20 hrs ago -
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 4 days, 10 hrs ago - more...
|
2011-03-17
, 09:44
|
|
Posts: 18 |
Thanked: 5 times |
Joined on Oct 2010
|
#202
|
Originally Posted by mase
I've tried with several ppds, including the printer specific, both PXL and PS. And also a Generic Postscript ppd. In every case cups complains about the missing filter.
Try a specific ppd file, or a postscript ppd. There is a generic postscript ppd
driver. Do you use a cups server in your network?
I use the AppSocket / HP JetDirect connection type and write the printer URI (socket://192.168.1.80). Then I provide the ppd (Ricoh-Aficio_MP_C2500_PXL.ppd). It says that the printer was added succesfully and prompts the printer config options. I change what I need and it says that the printer has been set up succesfully. But again in the printer tab it complains about foomatic-rip filter missing.
The same applies when I use the other ppds.
So what can it be?
Thanks mase! You're doing a great job here!
Last edited by malandante; 2011-03-17 at 12:15.
 |
|
2011-03-17
, 13:49
|
|
Posts: 355 |
Thanked: 205 times |
Joined on Jun 2010
@ Germany
|
#203
|
@malandante
What print server do you use? Windows or Linux cups?
If you are using cups, just let the server broadcast. To do this, edit
the publicity setting for the printer to use. I did so and I need no drivers
on the phone.
Last edited by mase; 2011-03-17 at 13:53.
What print server do you use? Windows or Linux cups?
If you are using cups, just let the server broadcast. To do this, edit
the publicity setting for the printer to use. I did so and I need no drivers
on the phone.
__________________
May the force be with us!
May the force be with us!
Last edited by mase; 2011-03-17 at 13:53.
|
|
2011-03-17
, 13:59
|
|
Posts: 18 |
Thanked: 5 times |
Joined on Oct 2010
|
#204
|
I'm not using any printer server. The printer at work is just in the network and has its own IP. So I'm connecting directly to it.
|
|
2011-03-17
, 14:17
|
|
Posts: 355 |
Thanked: 205 times |
Joined on Jun 2010
@ Germany
|
#205
|
Originally Posted by malandante
In this case a ppd for generic postscript should work.
I'm not using any printer server. The printer at work is just in the network and has its own IP. So I'm connecting directly to it.
__________________
May the force be with us!
May the force be with us!
| The Following User Says Thank You to mase For This Useful Post: | ||
|
|
2011-03-17
, 17:59
|
|
Posts: 18 |
Thanked: 5 times |
Joined on Oct 2010
|
#206
|
it doesnt make any difference which ppd I use, mase. i've tried the one you have kindly attached and it doesn't work either. I can only access the printer in raw mode, and then it only will print stuff about language level and bounding box.
|
|
2011-03-17
, 18:10
|
|
Posts: 355 |
Thanked: 205 times |
Joined on Jun 2010
@ Germany
|
#207
|
did you open the ppd when adding the printer?
You can choose manufacturer and model, or use a custom ppd.
You have to use the ppd there.
You can choose manufacturer and model, or use a custom ppd.
You have to use the ppd there.
__________________
May the force be with us!
May the force be with us!
|
|
2011-03-17
, 18:50
|
|
Posts: 18 |
Thanked: 5 times |
Joined on Oct 2010
|
#208
|
When I add a printer I have the following stages:
1. Name and other stuff like location
2. Connection type, where I can choose AppSocket, http, ipp, lpd and scsi printer. I choose AppSocket.
3. Connection URI. I type socket://192.168.1.80
4. Manufacturer and model or ppd. In the manufacturer list I just have generic cups pdf printer and raw.
So I use the ppds.
1. Name and other stuff like location
2. Connection type, where I can choose AppSocket, http, ipp, lpd and scsi printer. I choose AppSocket.
3. Connection URI. I type socket://192.168.1.80
4. Manufacturer and model or ppd. In the manufacturer list I just have generic cups pdf printer and raw.
So I use the ppds.
|
|
2011-03-17
, 18:55
|
|
Posts: 355 |
Thanked: 205 times |
Joined on Jun 2010
@ Germany
|
#209
|
Give http or ipp a try.
In model open the ppd for generic postscript.
In model open the ppd for generic postscript.
__________________
May the force be with us!
May the force be with us!
 |
|
2011-03-17
, 19:03
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#210
|
Hey.
Think Your connection URl is missing the port.
Try
socket://192.68.1.80:9100
Think Your connection URl is missing the port.
Try
socket://192.68.1.80:9100
driver. Do you use a cups server in your network?
May the force be with us!